• Picatinny Mounting Deck to Slide on and Screw Tight
• Ergonomic Finger Grooves for Most Comfortable Grip
• Tactical Pattern Accenting a Cool Look
• Clever End Cap Conceals Battery Storage and Controls Grip Mounting
• Practical Side Slides Allow for Ambi Use of Pressure Pad

• 5 Adjustable Foregrip Positions
• Ergonomic Finger Grooves for Most Comfortable Grip
• Clever End Cap Conceals Battery Storage and Controls Grip Mounting
• Practical Side Slides Allow for Ambi Use of Pressure Pad
• Simple Slide-on Mounting Deck for Most Solid Installation

• Well Contoured Finger Grooves for Most Solid and Repeatable Grip
• Ambidextrous Design with Fatigue-free Thumb Rest and Trigger Finger Shelf Offers Great Shooting Comfort in all Firing Positions
• Symmetrically Shaped Palm Swell and High Tech Texture with Slip-resistant Finish for Great Handling and Hand Support
• Creative Ergonomic Design with Angled Grip for Best Overall Control and Most Reliable Performance
• Smart End Cap Conceals Storage for Most Needed Accessories and Parts
• Mold from Unbreakable, Impact Resistant Advanced Polymer
• Overall Width is 2 1/4", Vertical Height is 4 1/2"

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel.

Made in U.S.A.

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel.

Made in U.S.A.

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel.

Made in U.S.A.

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel.

Made in U.S.A.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.

With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

The MWG transforms the magazine well into a comfortable, close ergonomic foregrip for enhanced maneuverability and lower signature of operator in CQB, combined with a magazine funnel for easier, faster, more reliable magazine change.

Advantages:
- Provides a tight and close hold for speed and maneuverability in CQB
- Prevents pressure on the magazine, reduce feeding related malfunctions
- Functions as a flared and extended magazine well, enhances reload speed and allows keeping eye contact with target during reload.
- Quick and easy installation, no gunsmith required Incorporates a serial number window
- Durable and lightweight fiberglass reinforced polymer construction

Compatibility: M16 5.56x45 lower receiver variants, without a flared magazine well. The MWG is not compatible with PMAG-GEN3

The MWG transforms the magazine well into a comfortable, close ergonomic foregrip for enhanced maneuverability and lower signature of operator in CQB, combined with a magazine funnel for easier, faster, more reliable magazine change.

Advantages:
- Provides a tight and close hold for speed and maneuverability in CQB
- Prevents pressure on the magazine, reduce feeding related malfunctions
- Functions as a flared and extended magazine well, enhances reload speed and allows keeping eye contact with target during reload.
- Quick and easy installation, no gunsmith required Incorporates a serial number window
- Durable and lightweight fiberglass reinforced polymer construction

Compatibility: M16 5.56x45 lower receiver variants, without a flared magazine well. The MWG is not compatible with PMAG-GEN3

The MWG transforms the magazine well into a comfortable, close ergonomic foregrip for enhanced maneuverability and lower signature of operator in CQB, combined with a magazine funnel for easier, faster, more reliable magazine change.

Advantages:
- Provides a tight and close hold for speed and maneuverability in CQB
- Prevents pressure on the magazine, reduce feeding related malfunctions
- Functions as a flared and extended magazine well, enhances reload speed and allows keeping eye contact with target during reload.
- Quick and easy installation, no gunsmith required Incorporates a serial number window
- Durable and lightweight fiberglass reinforced polymer construction

Compatibility: M16 5.56x45 lower receiver variants, without a flared magazine well. The MWG is not compatible with PMAG-GEN3

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.

Made in U.S.A.

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.

Made in U.S.A.

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.

Made in U.S.A.

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul DynamicsSM. Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.

Made in U.S.A.

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.

Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.

Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.

Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.

Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Made in U.S.A.

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle.

The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards.

Made in U.S.A.

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle.

The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards.

Made in U.S.A.

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle.

The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards.

Made in U.S.A.

The M-LOK Hand Stop Kit serves as a light weight, low-profile M-LOK slot index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle.

The kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Rail Cover Type 2 for the individual user to configure their kit as they desire. Also included in this kit is an adapter for use with Magpul M-LOK equipped polymer Hand Guards/Forends as well as other wider profile aluminum hand guards.

Made in U.S.A.

M-LOK compatible short and long handstops with M-LOK connectors and mounting hardware included.

M-LOK compatible dual angle vertical grip and barricade stop with included M-LOK connectors and mounting hardware.

The AG-44S is a lightweight ergonomic foregrip, made for superior tactical positioning and minimal front weight on your weapon.

Advantages:
- Provides a natural fighting stance
- Slightly angled to counter recoil
- Incorporates convenient storage compartment
- Improves overall performance, on-target time, and muzzle control
- Made of high grade reinforced polymer composite
- Quick and easy installation – no gunsmith required
- Compatible with all 1913 MIL-STD picatinny rail
- Available in black, olive drab green or desert tan