Home > Magazines > AR-15 Mags

Large Selection AR-15 Magazines    

Sort By:
Page of 3
571-BLK Magpul MOE PMag .223 30 Round Black

The PMAG 30 AR/M4 GEN M2 MOE is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI.

It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability.

Made in U.S.A.

MSRP $12.95
Our Price: $10.00
Savings: $2.95
104467 in stock!
UTGRBUAM01 UTG Pro AR15 Magazine 223/5.56 30 Round

• Proudly Designed and Made in USA
• Glass Fiber Reinforced Matte Black Polymer
• Impact and Heat Resistant
• Four-way Anti-Tilt High Visibility Blue Follower
• Molded Over Travel Stop and Grip Texturing
• Reliable Feeding High Longevity Stainless Steel Spring
• Open Surface Areas for Applying Grip Tape
• Removable Flared Floor Plate

NOTE: This product cannot be shipped to: California, Colorado, Connecticut, District of Columbia, Hawaii, Massachusetts, Maryland, New Jersey, New York, and Vermont.

List Price: $13.97
Our Price: $10.75
Savings: $3.22
(Out of Stock)
223-30RD-AL-G ASC AR15 Magazine 223/5.56 30 Round Aluminum Gray

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey,FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ, CO and Cook County, IL.

List Price: $14.00
Our Price: $11.25
Savings: $2.75
1298 in stock!
223-30RD-AL-G-O ASC AR15 Magazine 223/5.56 30 Round Aluminum Gray, Orange

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey,FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ, CO and Cook County, IL.

List Price: $14.00
Our Price: $11.25
Savings: $2.75
1392 in stock!
223-10RD-AL-G ASC AR15 Magazine 223/5.56 10 Round Aluminum Gray

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

List Price: $12.95
Our Price: $11.25
Savings: $1.70
434 in stock!
223-10RD-AL-G-O ASC AR15 Magazine 223/5.56 10 Round Aluminum Gray, Orange

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

List Price: $12.95
Our Price: $11.25
Savings: $1.70
457 in stock!
UTGRBT-AM30 UTG AR15 Magazine 556 With Window 30 Round

• Durable and Impact Resistant Glass Fiber Reinforced Matte Black Polymer Construction
• Four-way Anti-tilt High Visibility Blue Follower and High Longevity Stainless Steel Spring for Reliable Feeding
• Positive Grip Textured and Left and Right Side Windowed Main Body with Remaining Round Count Indicators, Over-insertion Stop, and Removable Flared Floor Plate

NOTE: This product cannot be shipped to: California, Colorado, Connecticut, District of Columbia, Hawaii, Massachusetts, Maryland, New Jersey, New York, and Vermont.

List Price: $14.97
Our Price: $11.50
Savings: $3.47
11055 in stock!
223-20RD-AL-G-O ASC AR15 Magazine 223/5.56 20 Round Aluminum Gray, Orange

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

List Price: $12.95
Our Price: $11.50
Savings: $1.45
826 in stock!
557-BLK Magpul M3 .223 30 Round Black

MAGPUL PMAG M3 .223 30 Round Black

The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Made in U.S.A.

MSRP $14.95
Our Price: $12.00
Savings: $2.95
98070 in stock!
557-MCT Magpul PMag M3 5.56 30 Round Medium Coyote Tan

MAGPUL PMAG M3 .223 30 Round Medium Coyote Tan

The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Made in U.S.A.

MSRP $14.95
Our Price: $12.50
Savings: $2.45
15556 in stock!
559-BLK Magpul PMag M3 5.56 10RND Black

The PMAG 10 GEN M3 is a 10-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Incorporating new material technology and manufacturing processes for enhanced strength, durability, and reliability, the PMAG 10 provides next-generation performance for those needing lower profile magazines.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

MSRP $13.95
Our Price: $12.75
Savings: $1.20
28856 in stock!
560-BLK Magpul M3 .223 20 Round Black

MAGPUL PMAG M3 .223 20 Round Black

The next-generation PMAG 30 GEN M3 is a 20-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Made in U.S.A.

MSRP $13.95
Our Price: $12.75
Savings: $1.20
2924 in stock!
223-5RD-SS-B ASC AR15 Magazine 223/5.56 5 Round Stainless Black, Black

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

List Price: $16.95
Our Price: $12.75
Savings: $4.20
558 in stock!
223-5RD-SS ASC AR15 Magazine 223/5.56 5 Round Stainless Black, Orange

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

List Price: $13.95
Our Price: $13.00
Savings: $0.95
436 in stock!
223-5RD-AL-G ASC AR15 Magazine 223/5.56 5 Round Aluminum Gray

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

List Price: $14.50
Our Price: $13.00
Savings: $1.50
206 in stock!
223-5RD-AL-G-O ASC AR15 Magazine 223/5.56 5 Round Aluminum Gray, Orange

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

List Price: $14.50
Our Price: $13.00
Savings: $1.50
276 in stock!
570-BLK Magpul MOE PMag .223 with Window 30 Round Black

The PMAG 30 AR/M4 GEN M2 MOE Window is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI.

It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability.

Made in U.S.A.

MSRP $15.95
Our Price: $13.25
Savings: $2.70
14944 in stock!
800-BLK Magpul PMag M3 300 Blackout 30 Round Black

The PMAG® 30 AR 300 B GEN M3™ is a purpose-designed magazine for rifles chambered in 300 Blackout®. Since its inception, 300 Blackout shooters have had to use a magazine designed for another cartridge, limiting its ultimate performance and compatibility. One of the nice features of 300 Blackout is the compatibility with 5.56x45mm parts, but with the magazine it is a compromise to do so. Due to the wide variety of projectile weights and profiles potentially decreasing overall reliability, a dedicated 300 Blackout magazine was a logical step for the PMAG line.

In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your 300 Blackout rifle. When using 5.56x45mm mags, the potential to chamber and fire a 300 Blackout round in a 5.56x45mm rifle with catastrophic results requires diligent ammunition management by the shooter. The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues. Along with optimized 300 Blackout performance, the PMAG 30 AR 300 B brings along all of the GEN M3 features such as our next-generation impact and crush resistant polymer, aggressive front and rear texture, an easily removable slim floor plate, a paint pen dot matrix for marking and identification, and a dust/impact cover.

MSRP $15.95
Our Price: $13.25
Savings: $2.70
22188 in stock!
AR15-30 ETS Magazine AR15 223/5.56 30 Round Smoke

MAG FEATURES
- Standard 30-round capacity
- No tilt follower with reliable bolt open on last round
- Clip on dust cover to keep dirt and debris out during storage
- Fast and easy disassembly for maintenance without tools via our specially designed floor plate
- Ergonomically designed floorplate makes it easy to grab from mag pouches
- Magazine grip ribs gives you superior control
- Lifetime Warranty

ADVANCED POLYMER BENEFITS
- Extreme Impact Resistance—won't crack or break when dropped
- Very resistant to harsh chemicals
- Superior heat, cold and UV resistance—won’t become brittle over time even when exposed to harsh environments or extreme cold
- Translucent body—allowing you to see your ammo count and type
- Creep resistant—the feed lips and body won't spread when being stored long term even when fully loaded

List Price: $13.99
Our Price: $13.25
Savings: $0.74
2163 in stock!
AR15-30C ETS Magazine AR15 223/5.56 30 Round Coupled Smoke

MAG FEATURES
- Standard 30-round capacity
- Built-in coupler allows multiple mags to be connected together in seconds with no tools or extra parts
- No tilt follower with reliable bolt open on last round
- Clip on dust cover to keep dirt and debris out during storage
- Fast and easy disassembly for maintenance without tools via our specially designed floor plate
- Ergonomically designed floorplate makes it easy to grab from mag pouches
- Magazine grip ribs gives you superior control
- Lifetime Warranty

ADVANCED POLYMER BENEFITS
- Extreme Impact Resistance—won't crack or break when dropped
- Very resistant to harsh chemicals
- Superior heat, cold and UV resistance—won’t become brittle over time even when exposed to harsh environments or extreme cold
- Translucent body—allowing you to see your ammo count and type
- Creep resistant—the feed lips and body won't spread when being stored long term even when fully loaded

List Price: $13.99
Our Price: $13.25
Savings: $0.74
3353 in stock!
223-10RD-SS ASC AR15 Magazine 223/5.56 10 Round Stainless Steel

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

MSRP $13.95
Our Price: $13.50
Savings: $0.45
488 in stock!
223-30RD-SS ASC AR15 Magazine 223/5.56 30 Round Stainless Steel

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

MSRP $15.95
Our Price: $13.50
Savings: $2.45
45 in stock!
223-20RD-SS-O ASC AR15 Magazine 223/5.56 20 Round Stainless Black, Orange

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

List Price: $13.95
Our Price: $13.50
Savings: $0.45
826 in stock!
223-30RD-SS-B ASC AR15 Magazine 223/5.56 30 Round Stainless Black, Black

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

List Price: $15.95
Our Price: $13.50
Savings: $2.45
2157 in stock!
223-20RD-SS ASC AR15 Magazine 223/5.56 20 Round Stainless Steel

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

MSRP $15.95
Our Price: $13.75
Savings: $2.20
714 in stock!
223-30RD-SS AR15 Magazine Stainless Steel - 30rd .223/5.56

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

MSRP $15.95
Our Price: $13.75
Savings: $2.20
10 in stock!
223-10RD-SS-B-B ASC AR15 Magazine 223/5.56 10 Round Stainless Steel Black, Black

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. Our Stainless-Steel AR-15 mags come in two colors, Black Marlube as well as Flat Dark Earth. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

List Price: $15.95
Our Price: $13.75
Savings: $2.20
491 in stock!
LS1350 Lancer Magazine Coupler with Cinch Black

The Lancer Magazine Coupler was developed for the L5, L5A and L5AWM Translucent Magazines.

The Coupler was designed to match the unique contours of the polymer body and align with the molded ribs ensuring the magazines are aligned and held securely without obscuring the view of the rounds.

The Lancer magazine Cinch can also be used with USGI Aluminum and Steel Magazines.

List Price: $22.41
Our Price: $14.00
Savings: $8.41
2076 in stock!
6.8-10RD-SS ASC AR15 Magazine 6.8 SPC Stainless Steel 10 Round

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

MSRP $14.95
Our Price: $14.00
Savings: $0.95
435 in stock!
7.62X9-10RD-SS ASC AR15 Magazine 7.62X39 Stainless Steel 10 Round

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

MSRP $14.95
Our Price: $14.00
Savings: $0.95
1385 in stock!