Ammunition Storage Components - ASC Products for Sale at Northern Rifleman

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey,FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ, CO and Cook County, IL.

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey,FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ, CO and Cook County, IL.

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

Aluminum Body:
Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades!

Available Coatings:
Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine.

Assembly Components:
- 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III
- Chrome Silicon Springs
- Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey
- 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. Our Stainless-Steel AR-15 mags come in two colors, Black Marlube as well as Flat Dark Earth. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
We offer a variety of durable coating options that will suit your needs. We have our proprietary coating, a high grade Marlube in Black or Flat Dark Earth which is a wear-in, not wear-off, coating that burnishes in the surface providing self-lubricating properties. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Stainless Steel Body:
ASC Stainless Steel magazines are an improvement on a classic, with the highest levels of durability and increased longevity, simply the best in the industry! Our magazines are manufactured 100% start to finish in the USA using .020” gauge 410 Stainless Steel Alloy and heat treated for superior strength and lasting endurance. Our magazines are chemically treated for corrosion resistance.

Available Coatings:
We offer a variety of durable coating options that will suit your needs. We have our proprietary coating, a high grade Marlube in Black or Flat Dark Earth which is a wear-in, not wear-off, coating that burnishes in the surface providing self-lubricating properties. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Stainless Steel Body:
ASC Stainless Steel magazines are an improvement on a classic, with the highest levels of durability and increased longevity, simply the best in the industry! Our magazines are manufactured 100% start to finish in the USA using .020” gauge 410 Stainless Steel Alloy and heat treated for superior strength and lasting endurance. Our magazines are chemically treated for corrosion resistance.

Available Coatings:
We offer a variety of durable coating options that will suit your needs. We have our proprietary coating, a high grade Marlube in Black or Flat Dark Earth which is a wear-in, not wear-off, coating that burnishes in the surface providing self-lubricating properties. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Stainless Steel Body:
ASC Stainless Steel magazines are an improvement on a classic, with the highest levels of durability and increased longevity, simply the best in the industry! Our magazines are manufactured 100% start to finish in the USA using .020” gauge 410 Stainless Steel Alloy and heat treated for superior strength and lasting endurance. Our magazines are chemically treated for corrosion resistance.

Available Coatings:
We offer a variety of durable coating options that will suit your needs. We have our proprietary coating, a high grade Marlube in Black or Flat Dark Earth which is a wear-in, not wear-off, coating that burnishes in the surface providing self-lubricating properties. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance
- Colt Style - Not compatible with Glock Receivers

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.

Stainless Steel Body:
Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look.

Available Coatings:
Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority!

Assembly Components:
- 410 Series Stainless Steel Body, Heat Treated
- Chrome Silicon Springs
- Enhanced Anti-tilt Polymer Followers with PTFE
- 300 Series SS Floor plate with Black Oxide Coating for Corrosion Resistance

Cannot ship to the following states:
CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.