The FN P-12™ – assembled in FN’s Viana, Portugal facility like the FN SLP™ – sports a 5+1-round capacity and premium matte black finish over anodized aluminum. At 18 inches in length, the Belgium-made cantilever barrel is fully chrome-lined for long life and added corrosion resistance. The barrel is factory installed with an Improved Cylinder™ stainless steel choke tube. Interchangeable Standard Invector™ choke tubes are offered as accessories.

Also standard on the new FN P-12™ are a fiber-optic front sight and flip-up iron sight for rapid target acquisition and precise aiming as well as a Weaver rail pattern for mounting additional optical accessories.

Specs
Gauge: 12-gauge, 2 3/4” and 3” chamber
Operation: Pump-action repeater
Ammo Capacity: Five 2 3/4” or Four 3”
Weight: 7 lb. 7 oz.
Barrel Length: 18”
Overall Length: 39”
Trigger Pull: 6.2 - 7.3 lb.
Sight Radius: 14”

RECEIVER
Matte black finish on all metal surfaces
Pump-action with rotating bolt
Aircraft-grade aluminum alloy receiver
BARREL
18” cantilever barrel
Chrome-lined chamber and bore
Standard Invector™ Improved Cylinder choke tube included
Weaver rail pattern on cantilever
STOCK
Matte black synthetic stock with aggressive checkering on buttstock and forend
Premium non-slip recoil pad
Two steel sling swivel studs
OPERATING CONTROLS
Speed pump design for rapid cycling
Curved operating handle
Forward trigger-guard mounted safety
MAGAZINE
Extended tube and polished shell
5+1 capacity
SIGHTS
Flip-up rear sight and fiber-optic front sight

Leveraging more than 100 years of autoloading shotgun engineering, the FN SLP™ was introduced in 2008 and was instantly recognized for performance and ingenuity as the 2009 Shotgun of the Year by The American Rifleman magazine. Capable of firing eight rounds in less than one second, the FN SLP™ features ultra-reliable gas operation, a durable matte black aircraft-grade alloy receiver, synthetic stock, an extended magazine tube and fully adjustable rifle sights.

Specs
Gauge: 12-gauge, 3” chamber
Operation: Gas-operated autoloader
Ammo Capacity: 6+1
Weight: 7.7 lb.
Barrel Length: 18”
Overall Length: 38.75″
Sights: High profile/Adjustable rear
Action: Semi-automatic, Active Valve Gas System
Width: 2.4″
Height: 7.9″
Choke Tube System: Standard Invector™
Drop at Comb: 1.375″
Length of Pull: 14"

GENERAL SPECIFICATIONS
Matte black finish on all metal surfaces
Active valve gas system
Two-piece bolt
RECEIVER
Aircraft-grade aluminum alloy receiver
Top-mounted one-piece MIL-STD-1913 accessory rail
BARREL
Hard-chromed bore and 3” chamber barrel
Standard Invector™ interchangeable choke tubes
Accessory sporting barrels are available
STOCK
Matte black synthetic
Checkered gripping panels on forearm and grip
Premium non-slip recoil pad
Two steel sling swivel studs
OPERATING CONTROLS
Receiver-mounted bolt release
Curved operating handle
Crossbolt safety on rear trigger guard
MAGAZINE
Extended tube
Aluminum tube cover
SIGHTS
High-profile adjustable ghost ring rear and wing protected front

For 2020, FN announces new advancements in the legendary FN SCAR® 20S – now chambered in the superb long range cartridge: 6.5 Creedmoor. Perfectly calibrated for long-range precision fire, the FN SCAR® 20S in 6.5 Creedmoor gives you the ability to engage targets exceeding 1,000 yards with ease. The chrome lined barrel of new FN SCAR® 20S will deliver precision accuracy with improved barrel life. The gas-operated piston design and Surefire ProComp 762 muzzle device manage recoil efficiently to improve follow-up shots and maintain target acquisition. Lending further aid is the match-grade, two-stage trigger that breaks crisply at 3.5-4.5 pounds, full-length MIL-STD 1913 rail at 12 o’clock position, and fixed buttstock providing adaptability to fit to each user’s needs through adjustable length of pull and cheek rest height. Now also available in FDE.

Specs
- Caliber: 6.5 Creedmoor
- Operation: Short-stroke gas piston
- Mag Capacity: 10 Rd.
- Barrel Length: 20"
- Overall Length: 41”-42.8”
- Weight: 11.6 lbs.

Primary Features
- Extended monolithic receiver
- Short-stroke gas piston
Receiver
- Hard-anodized monolithic aluminum
- MIL-STD-1913 accessory rails at 3, 6, 9, and 12 o’clock positions
Barrel
- Heavy Cold hammer-forged, chrome-lined, free-floating barrel with muzzle device
Trigger
- Two-Stage Match trigger (Geissele® “Super SCAR”)
Stock
- Precision adjustable for LOP and comb height
- Adjustable cheekpiece
- Hogue® rubber grip with finger grooves
Operating Controls
- Ambidextrous safety lever and magazine release
- Charging handle may be mounted on right or left side
- Enlarged trigger guard for easier access when wearing gloves
- Composite polymer trigger module
Magazine
- Steel magazine body
- Low-friction follower

For 2020, FN announces new advancements in the legendary FN SCAR® 20S – now chambered in the superb long range cartridge: 6.5 Creedmoor. Perfectly calibrated for long-range precision fire, the FN SCAR® 20S in 6.5 Creedmoor gives you the ability to engage targets exceeding 1,000 yards with ease. The chrome lined barrel of new FN SCAR® 20S will deliver precision accuracy with improved barrel life. The gas-operated piston design and Surefire ProComp 762 muzzle device manage recoil efficiently to improve follow-up shots and maintain target acquisition. Lending further aid is the match-grade, two-stage trigger that breaks crisply at 3.5-4.5 pounds, full-length MIL-STD 1913 rail at 12 o’clock position, and fixed buttstock providing adaptability to fit to each user’s needs through adjustable length of pull and cheek rest height. Now also available in Black.

Specs
- Caliber: 6.5 Creedmoor
- Operation: Short-stroke gas piston
- Mag Capacity: 10 Rd.
- Barrel Length: 20"
- Overall Length: 41”-42.8”
- Weight: 11.6 lbs.

Primary Features
- Extended monolithic receiver
- Short-stroke gas piston
Receiver
- Hard-anodized monolithic aluminum
- MIL-STD-1913 accessory rails at 3, 6, 9, and 12 o’clock positions
Barrel
- Heavy Cold hammer-forged, chrome-lined, free-floating barrel with muzzle device
Trigger
- Two-Stage Match trigger (Geissele® “Super SCAR”)
Stock
- Precision adjustable for LOP and comb height
- Adjustable cheekpiece
- Hogue® rubber grip with finger grooves
Operating Controls
- Ambidextrous safety lever and magazine release
- Charging handle may be mounted on right or left side
- Enlarged trigger guard for easier access when wearing gloves
- Composite polymer trigger module
Magazine
- Steel magazine body
- Low-friction follower

Modern, modular, and multi-caliber, the Ballista® represents the future of precision rifle systems. Designed to deliver surgically precise fire, the rifle can be configured in less than two minutes to any of three available chamberings (.338 Lapua Mag., .300 Win. Mag., and .308 Win.). Featuring repeatable accuracy with all chamberings, the Ballista® employs a high strength, vibration-isolated aluminum alloy receiver with a top-mounted MIL-STD-1913 rail. In addition, the rifle features multiple rail segments for the addition of accessories. Fluted barrels measure 26 inches, and the bores have polygonal rifling with a right-hand, constant twist rate. A fully adjustable trigger (for single or two-stage release between 3 and 5 pounds) and adaptable, ambidextrous folding stock allows the shooter to configure the rifle for enhanced performance. For those who want the future of precision rifle performance today, look no further than the Ballista® multi-caliber system.

Specs
- Caliber: .338 Lapua Mag (converts to .300 Win. Mag and .308 Win.)
- Operation: Bolt-action
- Mag Capacity: 5 or 8 Rd. (.338 Lapua Mag.), 6 or 10 Rd. (.300 Win. Mag.), 8 or 15 Rd. (.308 Win.)
- Weight: 15.1 lb.
- Barrel Length: 26"
- Overall Length: 39" - 50.75"
- Height: 7.8"

PRIMARY FEATURES
- Change calibers in less than 2 minutes
- Receiver is vibration-isolated from the aluminum chassis via elastomeric cushions
RECEIVER
- High-strength aluminum alloy with top-mounted MIL-STD 1913 rail
- Accepts magazine for multiple calibers without further modification
BARREL
- Hammer-forged precision stainless steel
- Headspace is preset within the barrel extension
- Retains centerline alignment with receiver
- Retains zero with same caliber
- .338 Lapua Mag., .300 Winchester Mag., and .308 Winchester barrels utilize right hand, polygonal, constant twist rate
- Accessory conversion kits available in: .300 Win. Mag. and .308 Win.
STOCK
- Ambidextrous, folding and fully adjustable for length of pull, buttplate height, cheekpiece height, and cast-on/cast-off
- Single-lever side-folding stock to minimize overall length
OPERATING CONTROLS
- Ambidextrous magazine release forward of trigger guard
- Trigger system is fully adjustable for single- or two-stage release between 3 and 5 lbs.
- Multiple safety systems include manual thumb safety, grip safety, and drop safety system
MAGAZINE
- Advanced polymer construction
- Stainless steel spring
- Designed to protect projectile during recoil