Home > Manufacturers > Grey Ghost Precision

Grey Ghost Precision Products for Sale at Northern Rifleman

Sort By:
Page of 2
GGPSCKG17G19 GGP Slide Completion Kit for Glock

ALL THE PARTS YOU NEED TO COMPLETE YOUR GGP SLIDE OR OEM GLOCK SLIDE ASSEMBLY GEN 1-4

The GGP Slide Completion Kit includes all of the internal small parts needed to complete your slide assembly. Our kit is compatible with 9mm GGP-17/19 Gen 1-4 slides as well as Glock OEM 17/19/26/34 Gen 1-4 slides. The upgraded 17-4 PH stainless steel striker, extractor depressor plunger, striker safety and 9mm extractor are all machined from bar stock to provide unmatched reliability.

  • 17-4 PH STAINLESS STEEL STRIKER
  • 17-4 PH STAINLESS STEEL 9MM EXTRACTOR
  • 17-4 PH STAINLESS STEEL EXTRACTOR DEPRESSOR PLUNGER
  • 17-4 PH STAINLESS STEEL STRIKER SAFETY
  • GGP 6061-T6 ALUMINUM BACK PLATE
  • 5.5LB STRIKER SAFETY SPRING
  • EXTRACTOR DEPRESSOR PLUNGER SPRING
  • STRIKER SAFETY SPRING
  • GGP STRIKER CHANNEL LINER
  • STRIKER SPACER SLEEVE
  • STRIKER SPRING CUPS (2)
  • EXTRACTOR DEPRESSOR PLUNGER BEARING

List Price: $89.99
Our Price: $103.75
(Out of Stock)
GGPCUR GGP Forged Upper Receiver

Cornerstone Lower fans have been asking for years now; "Do you make a forged upper with the same gorgeous anodizing and tight fit as your lower?” Ask and ye shall receive!

Finally you can grab what we consider the best forged upper in the biz, and it is a perfect companion for your GGP Cornerstone Lower receiver. After all, accuracy comes from tight, precise tolerances that minimize all variables from the moment the hammer strikes the firing pin until the round leaves the muzzle. By perfecting the critical tooling dimensions to the smallest degree, a forged receiver can punch the same hole down range.

  • Machined to tighter than Mil-Spec tolerances, the critical tooling dimensions are held to within +/ - .001"
  • Machined from forged 7075-T6 Aluminum
  • Black Hard anodized with a surface hardness of 60 Rockwell
  • M4 Feedramps
  • .250" Takedown pin holes
  • Engraved T-marks
  • Functions with nearly all available AR-15 parts kits and lowers
  • Match with our Cornerstone lower receiver for a solid and dependable fit
  • Stripped Receiver DOES NOT include port door, forward assist or any small parts

Weight:
0.4 lbs

List Price: $109.00
Our Price: $104.75
Savings: $4.25
63 in stock!
BARRELG19NTTIN GGP G19 Titanium Gen 3/4 Barrel

G19
• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel • Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• Proprietary twist rate
• Choose from Gen 3-4 or Gen 5
• Optional Titanium finish
• Available threaded and non-threaded
• Non-Threaded Length: 4"
• Threaded Length: 4.5"
• Weight – 5oz

To be used with brass, factory loaded ammunition

List Price: $179.00
Our Price: $153.50
Savings: $25.50
52 in stock!
BARRELG43NTTIN GGP Barrel for Glock 43 Titanium

G43

• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel
• Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• 1:10 twist rate
• Compatible with Glock® 43 and 43X
• Titanium Finished
• Non-Threaded Length: 3.375"
• Weight – 4oz

List Price: $179.99
Our Price: $153.50
Savings: $26.49
(Out of Stock)
BARRELG175NTBN GGP G17 Non Threaded Gen 5 Barrel

G17

• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel
• Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• 1:10 twist rate
• Choose from Gen 3-4 or Gen 5
• Available as Stainless or Black Nitride Finished
• Available threaded or non-threaded
• Non-Threaded Length: 4.5"
• Threaded Length: 5"
• Weight – 5oz

To be used with brass, factory loaded ammunition

List Price: $179.99
Our Price: $172.75
Savings: $7.24
25 in stock!
BARRELG195NTBN GGP G19 Non Threaded Gen 5 Barrel

G19
• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel • Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• Proprietary twist rate
• Choose from Gen 3-4 or Gen 5
• Optional Black Nitride Finish for durability without hindering performance
• Available threaded and non-threaded
• Non-Threaded Length: 4"
• Threaded Length: 4.5"
• Weight – 5oz

To be used with brass, factory loaded ammunition

List Price: $179.99
Our Price: $172.75
Savings: $7.24
84 in stock!
BARRELG43NTBN GGP Barrel for Glock 43 Black

G43

• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel
• Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• 1:10 twist rate
• Compatible with Glock® 43 and 43X
• Black Nitride Finished
• Non-Threaded Length: 3.375"
• Weight – 4oz

List Price: $179.99
Our Price: $172.75
Savings: $7.24
(Out of Stock)
BARRELG175TBN GGP G17 Threaded Gen 5 Barrel

G17

• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel
• Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• 1:10 twist rate
• Choose from Gen 3-4 or Gen 5
• Available as Stainless or Black Nitride Finished
• Available threaded or non-threaded
• Non-Threaded Length: 4.5"
• Threaded Length: 5"
• Weight – 5oz

To be used with brass, factory loaded ammunition

Thread Pitch: 1/2 x 28 TPI

List Price: $189.99
Our Price: $182.50
Savings: $7.49
(Out of Stock)
BARRELG17TBN GGP G17 Threaded Gen 3/4 Barrel

G17

• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel
• Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• 1:10 twist rate
• Choose from Gen 3-4 or Gen 5
• Available as Stainless or Black Nitride Finished
• Available threaded or non-threaded
• Non-Threaded Length: 4.5"
• Threaded Length: 5"
• Weight – 5oz

To be used with brass, factory loaded ammunition

Thread Pitch: 1/2 x 28 TPI

List Price: $189.99
Our Price: $182.50
Savings: $7.49
18 in stock!
BARRELG17TTIN GGP G17 Threaded Titanium Gen 3/4 Barrel

G17

• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel
• Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• 1:10 twist rate
• Choose from Gen 3-4
• Available as Titanium Finished
• Available threaded
• Non-Threaded Length: 4.5"
• Threaded Length: 5"
• Weight – 5oz

To be used with brass, factory loaded ammunition

Thread Pitch: 1/2 x 28 TPI

List Price: $189.99
Our Price: $182.50
Savings: $7.49
26 in stock!
BARRELG195TBN GGP G19 Threaded Gen 5 Barrel

G19
• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel • Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• Proprietary twist rate
• Choose from Gen 3-4 or Gen 5
• Optional Black Nitride Finish for durability without hindering performance
• Available threaded and non-threaded
• Non-Threaded Length: 4"
• Threaded Length: 4.5"
• Weight – 5oz

To be used with brass, factory loaded ammunition

Thread Pitch: 1/2 x 28 TPI

List Price: $189.99
Our Price: $182.50
Savings: $7.49
30 in stock!
BARRELG19TBN GGP G19 Threaded Gen 3/4 Barrel

G19
• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel • Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• Proprietary twist rate
• Choose from Gen 3-4 or Gen 5
• Optional Black Nitride Finish for durability without hindering performance
• Available threaded and non-threaded
• Non-Threaded Length: 4"
• Threaded Length: 4.5"
• Weight – 5oz

To be used with brass, factory loaded ammunition

Thread Pitch: 1/2 x 28 TPI

List Price: $189.99
Our Price: $182.50
Savings: $7.49
45 in stock!
BARRELG19TTIN GGP G19 Threaded Titanium Gen 3/4 Barrel

G19
• 416R Gun Barrel Quality Stainless Steel
• Match Grade drop in barrel • Final dimension of +/- 0.003” for consistent accuracy
• SAAMI spec. 9mm Match chambers
• Proprietary twist rate
• Choose from Gen 3-4 or Gen 5
• Optional Titaniun Finish
• Available threaded and non-threaded
• Non-Threaded Length: 4"
• Threaded Length: 4.5"
• Weight – 5oz

To be used with brass, factory loaded ammunition

Thread Pitch: 1/2 x 28 TPI

List Price: $189.99
Our Price: $182.50
Savings: $7.49
55 in stock!
GGPSPG43V1GRY GGP Slide for Glock 43 V1 Gray

The Grey Ghost Precision SPG43 Slide is the precision manufactured aftermarket slide you've been looking for to upgrade your Glock® 43, Glock®43X or complete your SS80/P80 G43 build.

  • All slides are stripped slides
  • Machined from 17-4PH Stainless Steel to have tighter tolerances than a factory slide
  • Finished in Diamond-Like Coating
  • Available in Slide Pattern Version 1 (angled serrations)
  • Compatible with OEM parts and barrels
  • Milled for the Shield RMS optic (correct length mounting screws included)
  • No mounting plate needed
  • Cover plate included

Weight
  • Version 1 | 8.9 oz

List Price: $349.99
Our Price: $336.00
Savings: $13.99
(Out of Stock)
GGP320CBLK1 GGP Slide for Sig Sauer P320 Compact V1 Black

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $418.95
Our Price: $402.25
Savings: $16.70
(Out of Stock)
GGP320CFDE1 GGP Slide for Sig Sauer P320 Compact V1 FDE

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $418.95
Our Price: $402.25
Savings: $16.70
(Out of Stock)
GGP320CGRY1 GGP Slide for Sig Sauer P320 Compact V1 Gray

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $418.95
Our Price: $402.25
Savings: $16.70
(Out of Stock)
GGP173OCV2 GGP Slide for Glock 17 Gen 3 RMR V2

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP Gen 3 Compatible

Weights
  • Version 1 | 10.32 oz
  • Version 2 | 10.49 oz
  • Version 3 | 9.63 oz
  • Version 4 | 9.52 oz

List Price: $418.95
Our Price: $402.25
Savings: $16.70
17 in stock!
GGP173OCV4 GGP Slide for Glock 17 Gen 3 OC V4

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP Gen 3 Compatible

Weights
  • Version 1 | 10.32 oz
  • Version 2 | 10.49 oz
  • Version 3 | 9.63 oz
  • Version 4 | 9.52 oz

List Price: $418.95
Our Price: $402.25
Savings: $16.70
20 in stock!
GGP193OCV2 GGP Slide for Glock 19 Gen 3 RMR V2

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 1 Pattern: front and rear serrations with lightening holes within the front serrations
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP
  • Gen 3 Compatible

Weights
  • Version 1 | 9.65 oz
  • Version 2 | 9.93 oz
  • Version 3 | 9.44 oz
  • Version 4 | 9.45 oz

List Price: $418.95
Our Price: $402.25
Savings: $16.70
24 in stock!
GGP193OCV4 GGP Slide for Glock 19 Gen 3 OC V4

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 1 Pattern: front and rear serrations with lightening holes within the front serrations
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP
  • Gen 3 Compatible

Weights
  • Version 1 | 9.65 oz
  • Version 2 | 9.93 oz
  • Version 3 | 9.44 oz
  • Version 4 | 9.45 oz

List Price: $418.95
Our Price: $402.25
Savings: $16.70
18 in stock!
GGP194OCV2 GGP Slide for Glock 19 Gen 4 RMR V2

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 1 Pattern: front and rear serrations with lightening holes within the front serrations
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP
  • Gen 4 Compatible

Weights
  • Version 1 | 9.65 oz
  • Version 2 | 9.93 oz
  • Version 3 | 9.44 oz
  • Version 4 | 9.45 oz

List Price: $418.95
Our Price: $402.25
Savings: $16.70
27 in stock!
GGP194OCV4 GGP Slide for Glock 19 Gen 4 OC V4

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 1 Pattern: front and rear serrations with lightening holes within the front serrations
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP
  • Gen 4 Compatible

Weights
  • Version 1 | 9.65 oz
  • Version 2 | 9.93 oz
  • Version 3 | 9.44 oz
  • Version 4 | 9.45 oz

List Price: $418.95
Our Price: $402.25
Savings: $16.70
11 in stock!
GGP320FBLK1 GGP Slide for Sig Sauer P320 Fullsize V1 Black

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $429.95
Our Price: $412.75
Savings: $17.20
(Out of Stock)
GGP320FFDE1 GGP Slide for Sig Sauer P320 Fullsize V1 FDE

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $429.95
Our Price: $412.75
Savings: $17.20
(Out of Stock)
GGP320FGRY1 GGP Slide for Sig Sauer P320 Fullsize V1 Gray

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $429.95
Our Price: $412.75
Savings: $17.20
(Out of Stock)
GGP173OCV1 GGP Slide for Glock 17 Gen 3 RMR V1

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP Gen 3 Compatible

Weights
  • Version 1 | 10.32 oz
  • Version 2 | 10.49 oz
  • Version 3 | 9.63 oz
  • Version 4 | 9.52 oz

List Price: $449.99
Our Price: $432.00
Savings: $17.99
16 in stock!
GGP173OCV3 GGP Slide for Glock 17 Gen 3 OC V3

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP Gen 3 Compatible

Weights
  • Version 1 | 10.32 oz
  • Version 2 | 10.49 oz
  • Version 3 | 9.63 oz
  • Version 4 | 9.52 oz

List Price: $449.99
Our Price: $432.00
Savings: $17.99
50 in stock!
GGP174OCV3 GGP Slide for Glock 17 Gen 4 OC V3

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP
  • Gen 4 Compatible

Weights
  • Version 1 | 10.32 oz
  • Version 2 | 10.49 oz
  • Version 3 | 9.63 oz
  • Version 4 | 9.52 oz

List Price: $449.99
Our Price: $432.00
Savings: $17.99
10 in stock!
GGP193OCV1 GGP Slide for Glock 19 Gen 3 RMR V1

  • All slides are stripped slides
  • Machined from 17-4 Billet Stainless Steel to have tighter tolerances than a factory slide
  • Stainless steel slide cut and Black Nitride Coated inside and out
  • Available in Slide Pattern Version 1, 2, 3 or 4
  • Dual optic cutout for Trijicon RMR or Leupold DeltaPoint Pro (shim plates included)
  • Version 1 Pattern: front and rear serrations with lightening holes within the front serrations
  • Version 2 Pattern: front and rear "geoscale" texture
  • Version 3 Pattern: front and rear serrations with tapered depth (deeper serrations at top)
  • Version 4 Pattern: front and rear "micro-studded scale" texture
  • Includes a custom G10 cover plate and proper screws for cover plate, and correct length screws for RMR and DPP
  • Gen 3 Compatible

Weights
  • Version 1 | 9.65 oz
  • Version 2 | 9.93 oz
  • Version 3 | 9.44 oz
  • Version 4 | 9.45 oz

List Price: $449.99
Our Price: $432.00
Savings: $17.99
(Out of Stock)