Home > Handgun Parts
Choose a sub category:
AR-9 & AR-40 Parts Handgun Barrels Handgun Sights
Handgun Slides Handgun Triggers

Large Selection of Handgun Parts

Sort By:
Page of 1
APX112-025 Apex Sig Sauer P320 Enhancement Trigger

The Apex Flat-Faced Action Enhancement Trigger for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory curved trigger and is easily installed without the need for tools or fixtures. The flat design increases trigger reach to the natural resting position of the shooter’s finger and allows the shooter to position their finger lower on the trigger face to take advantage of the increased leverage. Machined from billet steel.

– Direct drop-in replacement of factory curved trigger
– No tools required for installation
– Reduces trigger pull weigh by approx. 18% (8.0 lbs to 6.5 lbs, as tested)
– In X-Series models, due to leverage, pull weight will increase approx. 6%, while overall travel reduces 10%
– Maintains factory drop safety values

MSRP $44.95
Our Price: $43.25
Savings: $1.70
(Out of Stock)
APX112-026 Apex Sig Sauer P320 Advanced Flat Trigger

The Apex Flat Advanced Trigger for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory curved trigger and reduces the trigger pull weight by approximately 35%. The flat design increases trigger reach to the natural resting position of the shooter’s finger and allows the shooter to position their finger lower on the trigger face to take advantage of the increased leverage. The trigger is easily installed without the need for tools or fixtures. Machined from billet steel.

– Direct drop-in replacement of factory curved trigger
– Reduces trigger pull weight by approximately 35%
– In X-Series models, reduces pull weight by approximately 10% and overall travel 15%
– No tools required for installation
– Maintains factory drop safety values

MSRP $49.95
Our Price: $48.00
Savings: $1.95
93 in stock!
APX112-027 Apex Sig Sauer P320 Advanced Curved Trigger

The Apex Curved Advanced Trigger for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory curved trigger and reduces the trigger pull weight by approximately 35%. The trigger is easily installed without the need for tools or fixtures. Machined from billet steel.

– Direct drop-in replacement of factory curved trigger
– Reduces trigger pull weight by approximately 35%
– In X-Series models, reduces pull weight by approximately 10% and overall travel 15%
– No tools required for installation
– Maintains factory drop safety values

MSRP $49.95
Our Price: $48.00
Savings: $1.95
78 in stock!
APX119-185 Apex Heavy Duty Striker FN 509/FNS

The Apex Heavy Duty Striker for the FN 509, FNS and FNS Compact is a direct drop-in replacement option for customers with FN 509 and FNS series pistols. The striker is machined from a billet of stainless steel and heat treated for enhanced durability.

Expected Results
– Direct drop-in replacement of FN 509, FNS, FNS Longslide and FNS Compact striker
– Requires use of the following factory striker components: Striker Spring Stop Pin, Striker Spring Guide, Striker Return Spring, Stop Pin and the Striker Spring.

List Price: $49.95
Our Price: $52.00
129 in stock!
VG100027A Aero Precision VG6 Precision Gamma 9MM

The next evolution in Pistol Caliber Carbine recoil control has finally arrived.

The VG6 GAMMA 9mm sets a new standard when it comes to recoil management by virtually eliminating any muzzle movement.

This muzzle brake / compensator hybrid virtually eliminates recoil and minimizes muzzle movement. The unique combination of both braking and compensating features inspire shooter confidence and allows the shooter to make very fast follow up shots. Its unique porting design has been optimized for the pressures of 9mm, providing a very soft feel in the shoulder thanks to gas ports dimensions that have been strenuously tested to give the utmost control to the muzzle.

Features:
- Material: 17-4ph® Heat Treated Stainless Steel
- Finish: BLACKNITRIDE™ - Satin Finish(Half Gloss)
- Surface Hardness: 68RC
- Caliber: 9mm only
- Thread: 1/2-28 RH
- Weight: 2.1oz
- Includes crush washer

List Price: $79.99
Our Price: $56.25
Savings: $23.74
(Out of Stock)
VG100028A Aero Precision VG6 Precision Gamma 9MM Bead Blasted

The next evolution in Pistol Caliber Carbine recoil control has finally arrived.

The VG6 GAMMA 9mm BBSS sets a new standard when it comes to recoil management by virtually eliminating any muzzle movement.

This muzzle brake / compensator hybrid virtually eliminates recoil and minimizes muzzle movement. The unique combination of both braking and compensating features inspire shooter confidence and allows the shooter to make very fast follow up shots. Its unique porting design has been optimized for the pressures of 9mm, providing a very soft feel in the shoulder thanks to gas ports dimensions that have been strenuously tested to give the utmost control to the muzzle.

Features:
- Material: 17-4ph® Heat Treated Stainless Steel
- Finish: Bead Blasted Stainless Steel
- Surface Hardness: 68RC
- Caliber: 9mm only
- Thread: 1/2-28 RH
- Weight: 2.1oz
- Includes crush washer

List Price: $79.99
Our Price: $56.25
Savings: $23.74
(Out of Stock)
SOX10001 Sig Sauer XRAY Night Sight P938/P320 Square Notch

Sig Sauer XRAY Night Sight P938/P320 Square Notch

Compare the X-RAY3 to other conventional sights and you will see the blacked-out rear sight and the high contrast front sight of the X-RAY3, make target acquisition intuitive and fast and in any light condition. This 3-Dot tritium system has a superior glowing illumination in low-light and remains bright and white for daylight conditions. No more changing sights from night to day patrols, keeping your sights consistent for all your work or hunting light conditions. The steel surrounds the tritium sights and gives them protection from recoil and protects from cleaning solvents and the harsh elements. Whether you carry for work or for sport, these X-RAY3 tritium sights will be bright for over a decade and the tested design of the X-RAY3 will stay at max performance.

FEATURES:
• With a half-life of 12 years, the 3-Dot tritium system allows for fast target acquisition in low-light conditions
• Oversized chemical resistant fluorescent polymer front dot gives confidence in any environment
• Sights come in standard SIG SAUER sizes of #6 and #8 in square or round (U)notched rear sight
• Torture tested to 20,000 rounds, the steel housing provides for a tough, reliable sight that lasts as long as the firearm
• Fits P320, P938, P238, P229, P226, P220, P227, P225
• X-RAY3 sights come standard on SIG SAUER Legion Series pistols.

Which Sight Size Is Right For Your Pistol?
The X-RAY3 sights come in sets ranging from matching #6s, alternating #6/8s, and matching #8/8. To determine the current size of your pistol sights, look at the small number on the horizontally aligned bar on either side of the sight post. That number should be available on both your front and rear sight. If you have determined that you are satisfied with your current pistol sights, simply select the exact same number combination from the X-RAY3 product line.

For reference:
SOX10005, SOX10006 - #6 Front / #6 Rear
SOX10001, SOX10002 - #6 Front / #8 Rear
SOX10007, SOX10008 - #8 Front / #6 Rear
SOX10003, SOX10004 - #8 Front / #8 Rear

MSRP $109.99
Our Price: $67.50
Savings: $42.49
(Out of Stock)
SOX10001 Sig Sauer XRAY Night Sight P938/P320 Round Notch

Sig Sauer XRAY Night Sight P938/P320 Round Notch

Compare the X-RAY3 to other conventional sights and you will see the blacked-out rear sight and the high contrast front sight of the X-RAY3, make target acquisition intuitive and fast and in any light condition. This 3-Dot tritium system has a superior glowing illumination in low-light and remains bright and white for daylight conditions. No more changing sights from night to day patrols, keeping your sights consistent for all your work or hunting light conditions. The steel surrounds the tritium sights and gives them protection from recoil and protects from cleaning solvents and the harsh elements. Whether you carry for work or for sport, these X-RAY3 tritium sights will be bright for over a decade and the tested design of the X-RAY3 will stay at max performance.

FEATURES:
• With a half-life of 12 years, the 3-Dot tritium system allows for fast target acquisition in low-light conditions
• Oversized chemical resistant fluorescent polymer front dot gives confidence in any environment
• Sights come in standard SIG SAUER sizes of #6 and #8 in square round (U)notched rear sight
• Torture tested to 20,000 rounds, the steel housing provides for a tough, reliable sight that lasts as long as the firearm
• Fits P320, P938, P238, P229, P226, P220, P227, P225
• X-RAY3 sights come standard on SIG SAUER Legion Series pistols.

Which Sight Size Is Right For Your Pistol?
The X-RAY3 sights come in sets ranging from matching #6s, alternating #6/8s, and matching #8/8. To determine the current size of your pistol sights, look at the small number on the horizontally aligned bar on either side of the sight post. That number should be available on both your front and rear sight. If you have determined that you are satisfied with your current pistol sights, simply select the exact same number combination from the X-RAY3 product line.

For reference:
SOX10005, SOX10006 - #6 Front / #6 Rear
SOX10001, SOX10002 - #6 Front / #8 Rear
SOX10007, SOX10008 - #8 Front / #6 Rear
SOX10003, SOX10004 - #8 Front / #8 Rear

MSRP $109.99
Our Price: $67.50
Savings: $42.49
(Out of Stock)
SOX10003 Sig Sauer XRAY Night Sight P228/229/239 Square

Sig Sauer XRAY Night Sight P228/229/239 Square Notch

Compare the X-RAY3 to other conventional sights and you will see the blacked-out rear sight and the high contrast front sight of the X-RAY3, make target acquisition intuitive and fast and in any light condition. This 3-Dot tritium system has a superior glowing illumination in low-light and remains bright and white for daylight conditions. No more changing sights from night to day patrols, keeping your sights consistent for all your work or hunting light conditions. The steel surrounds the tritium sights and gives them protection from recoil and protects from cleaning solvents and the harsh elements. Whether you carry for work or for sport, these X-RAY3 tritium sights will be bright for over a decade and the tested design of the X-RAY3 will stay at max performance.

FEATURES:
• With a half-life of 12 years, the 3-Dot tritium system allows for fast target acquisition in low-light conditions
• Oversized chemical resistant fluorescent polymer front dot gives confidence in any environment
• Sights come in standard SIG SAUER sizes of #6 and #8 in square or round (U)notched rear sight
• Torture tested to 20,000 rounds, the steel housing provides for a tough, reliable sight that lasts as long as the firearm
• Fits P320, P938, P238, P229, P226, P220, P227, P225
• X-RAY3 sights come standard on SIG SAUER Legion Series pistols.

Which Sight Size Is Right For Your Pistol?
The X-RAY3 sights come in sets ranging from matching #6s, alternating #6/8s, and matching #8/8. To determine the current size of your pistol sights, look at the small number on the horizontally aligned bar on either side of the sight post. That number should be available on both your front and rear sight. If you have determined that you are satisfied with your current pistol sights, simply select the exact same number combination from the X-RAY3 product line.

For reference:
SOX10005, SOX10006 - #6 Front / #6 Rear
SOX10001, SOX10002 - #6 Front / #8 Rear
SOX10007, SOX10008 - #8 Front / #6 Rear
SOX10003, SOX10004 - #8 Front / #8 Rear

MSRP $109.99
Our Price: $67.50
Savings: $42.49
(Out of Stock)
SOX10003 Sig Sauer XRAY Night Sight P228/229/239 Round

Sig Sauer XRAY Night Sight P228/229/239 Round Notch

Compare the X-RAY3 to other conventional sights and you will see the blacked-out rear sight and the high contrast front sight of the X-RAY3, make target acquisition intuitive and fast and in any light condition. This 3-Dot tritium system has a superior glowing illumination in low-light and remains bright and white for daylight conditions. No more changing sights from night to day patrols, keeping your sights consistent for all your work or hunting light conditions. The steel surrounds the tritium sights and gives them protection from recoil and protects from cleaning solvents and the harsh elements. Whether you carry for work or for sport, these X-RAY3 tritium sights will be bright for over a decade and the tested design of the X-RAY3 will stay at max performance.

FEATURES:
• With a half-life of 12 years, the 3-Dot tritium system allows for fast target acquisition in low-light conditions
• Oversized chemical resistant fluorescent polymer front dot gives confidence in any environment
• Sights come in standard SIG SAUER sizes of #6 and #8 in square or round (U)notched rear sight
• Torture tested to 20,000 rounds, the steel housing provides for a tough, reliable sight that lasts as long as the firearm
• Fits P320, P938, P238, P229, P226, P220, P227, P225
• X-RAY3 sights come standard on SIG SAUER Legion Series pistols.

Which Sight Size Is Right For Your Pistol?
The X-RAY3 sights come in sets ranging from matching #6s, alternating #6/8s, and matching #8/8. To determine the current size of your pistol sights, look at the small number on the horizontally aligned bar on either side of the sight post. That number should be available on both your front and rear sight. If you have determined that you are satisfied with your current pistol sights, simply select the exact same number combination from the X-RAY3 product line.

For reference:
SOX10005, SOX10006 - #6 Front / #6 Rear
SOX10001, SOX10002 - #6 Front / #8 Rear
SOX10007, SOX10008 - #8 Front / #6 Rear
SOX10003, SOX10004 - #8 Front / #8 Rear

MSRP $109.99
Our Price: $67.50
Savings: $42.49
(Out of Stock)
APX112-041 Apex Sig Sauer P320 Forward Set Trigger Bar KIT

The Apex Forward Set Trigger Bar for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory trigger bar and is easily installed without the need for tools or fixtures. The patent pending Apex Forward Set Trigger Bar reduces trigger travel and reset and can be paired with the factory curved trigger or one of the three Apex triggers for the P320 (112-025, 112-026 or 112-027). Machined from billet steel.

– Direct drop-in replacement of factory trigger bar
– Reduces trigger travel approx. 20%
– Reduces reset
– Reduces trigger pull weight by approx. 10%
– In X-Series models, does not reduce pull weight but does reduce overall travel 20%
– Can be paired with the factory trigger, or an Apex trigger (112-025, 112-026 or 112-027)
– Maintains factory drop safety values

MSRP $79.95
Our Price: $76.75
Savings: $3.20
(Out of Stock)
APX112-030 Apex Sig Sauer P320 Enhancement Trigger/Bar

The Apex Flat-Faced Action Enhancement Trigger Kit for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory trigger bar and curved trigger and is easily installed without the need for tools or fixtures. The patent pending Apex Forward Set Trigger Bar reduces trigger travel and reset while the Apex Flat-Faced Action Enhancement Trigger increases trigger reach to the natural resting position of the shooter’s finger and allows the shooter to position their finger lower on the trigger face to take advantage of the increased leverage. Machined from billet steel.

– Direct drop-in replacement of factory trigger bar and curved trigger
– Reduces trigger travel approx. 40%
– Reduces reset approx. 20%
– Reduces trigger pull weight by approx. 20%
– In X-Series models, due to leverage, pull weight will increase approx. 6%, while overall travel reduces 30%
– Maintains factory drop safety values

MSRP $119.95
Our Price: $115.25
Savings: $4.70
(Out of Stock)
APX112-031 Apex Sig Sauer P320 Flat Advanced Trigger/Bar

The Apex Flat Forward Set Trigger Kit for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory trigger bar and curved trigger and is easily installed without the need for tools or fixtures. The patent pending Apex Forward Set Trigger Bar reduces trigger travel and reset while the Apex Flat Advanced Trigger reduces the trigger pull weight and increases trigger reach to the natural resting position of the shooter’s finger and allows the shooter to position their finger lower on the trigger face to take advantage of the increased leverage. Machined from billet steel.

NOTE: As of May 15th, 2018, this trigger kit is legal for use in USPSA's Production Division (please see Appendix D4, section 21.6, of the USPSA Production Division rules).

– Direct drop-in replacement of factory trigger bar and curved trigger
– Reduces trigger travel approx. 30%
– Reduces reset approx. 20%
– Reduces trigger pull weight by approx. 30%
– In X-Series models, does not reduce pull weight but does reduce overall travel 30%
– Maintains factory drop safety values

MSRP $124.95
Our Price: $120.00
Savings: $4.95
(Out of Stock)
0631153108 Meprolight FT Bullseye SIG 226, P320 Rear Sight

Based on an optical illumination patent, the MEPRO FT Bullseye is an extremely small, low profile, optical pistol sight. Similar to reflex sights, using the MEPRO FT Bullseye provides the shooter with an aim point in the form of an illuminated dot and circle Bullseye. Shooters can enjoy intuitive and fast target acquisition.

The Fiber-optic Tritium combination enables instant and accurate shooting in all lighting conditions with no batteries needed.

The Fiber-optic used in bright light or day shooting and the premium-grade Tritium provides instant illumination at night or in low-light conditions.

The MEPRO FT Bullseye installation is simple and easy on existing pistol dovetails, eliminates the need for a front sight and fits most existing holsters.

Unique Advantages:

- Smallest optical sight in the world based on patented optical illumination.
- Superior visibility in all lighting conditions.
- No front sight needed.
- Fast and intuitive target acquisition.
- Fits most existing holsters.
- Simple, easy installation on existing pistol dovetail.
- No Batteries – No Switches – Always On- Always Ready.
- Nighttime Illumination guaranteed for 12 years.

List Price: $139.99
Our Price: $141.25
8 in stock!
APX119-125 Apex FN 509 Enhancement Trigger Kit Black

The Apex Action Enhancement Kit for the FN 509 model pistols is a direct drop-in replacement of the factory polymer trigger, trigger bar and sear. The patent pending Apex design reduces trigger pull weight to give you an approx. pull weight in the 5.5 lbs range. Trigger travel is also reduced, including pre-travel, over-travel, overall trigger travel and trigger reset distance. It provides a smooth uptake while delivering a crisp trigger break.

Expected Results
– Direct drop-in replacement of factory polymer trigger, trigger bar and sear
– Reduces trigger pull weight to approx. the 5.5 lbs. range
– Reduces trigger pre-travel, over-travel and reset distance
– Provides crisp trigger break
– Center mounted pivoting safety maintains factory safety values

List Price: $149.95
Our Price: $144.00
Savings: $5.95
(Out of Stock)
APX119-126 Apex Black Curved AE Trigger Kit FN 509

The Apex Action Enhancement Kit with Curved Trigger for the FN 509 model pistols is a direct drop-in replacement of the factory polymer trigger, trigger bar and sear. The patent pending Apex design reduces trigger pull weight to give you an approx. pull weight in the 5.5 lbs range. Trigger travel is also reduced, including pre-travel, over-travel, overall trigger travel and trigger reset distance. It provides a smooth uptake while delivering a crisp trigger break.

Expected Results
– Direct drop-in replacement of factory polymer trigger, trigger bar and sear
– Reduces trigger pull weight to approx. the 5.5 lbs. range
– Reduces trigger pre-travel, over-travel and reset distance
– Provides crisp trigger break
– Center mounted pivoting safety maintains factory safety values

List Price: $149.95
Our Price: $144.00
Savings: $5.95
(Out of Stock)
BBL-229-357 Sig Sauer 357 Sig Conversion Barrel for P229

MODEL P229
CALIBER 357 SIG

Replacement barrel for SIG SAUER P229, chambered in .357SIG. 3.9" long.

Will also fit a .40 AUTO P229 with no additional parts.

SIG SAUER factory replacement pistol barrels are specially heat-treated for toughness and durability.

MSRP $149.00
Our Price: $147.75
Savings: $1.25
70 in stock!
BBL-226-357 Sig Sauer 357 Sig Conversion Barrel for P226

MODEL P226
CALIBER 357 SIG

Replacement barrel for SIG SAUER P226, chambered in .357SIG. 4.4" long.

Will also fit a .40 AUTO P226 with no additional parts.

SIG SAUER factory replacement pistol barrels are specially heat-treated for toughness and durability.

MSRP $149.00
Our Price: $147.75
Savings: $1.25
40 in stock!
APX119-145 Apex FN 509 Enhancement Triggert Kit FDE

The Apex Action Enhancement Kit for the FN 509 model pistols is a direct drop-in replacement of the factory polymer trigger, trigger bar and sear. The patent pending Apex design reduces trigger pull weight to give you an approx. pull weight in the 5.5 lbs range. Trigger travel is also reduced, including pre-travel, over-travel, overall trigger travel and trigger reset distance. It provides a smooth uptake while delivering a crisp trigger break.

Expected Results
– Direct drop-in replacement of factory polymer trigger, trigger bar and sear
– Reduces trigger pull weight to approx. the 5.5 lbs. range
– Reduces trigger pre-travel, over-travel and reset distance
– Provides crisp trigger break
– Center mounted pivoting safety maintains factory safety values

List Price: $154.95
Our Price: $148.75
Savings: $6.20
(Out of Stock)
BBL-226-9-T Sig Sauer 9 MM Threaded Conversion Barrel for P226

MODEL P226
CALIBER 9mm Luger

Details
Upgrade or replace the barrel on your P226 with this original SIG SAUER part. The threaded barrel is chambered in 9mm and allows you to attach a suppressor or other muzzle device. A knurled thread cap protects the end when no device is attached. SIG SAUER factory replacement pistol barrels are specially heat-treated for toughness and durability. Thread pitch: 13.5 x 1LH

MSRP $199.00
Our Price: $197.75
Savings: $1.25
2 in stock!
BBL-229-1-9-T Sig Sauer 9 MM Threaded Conversion Barrel for P229

MODEL P229
CALIBER 9mm Luger

Details
Replacement barrel for the E2 Grip style SIG SAUER P229, chambered in 9MM, 3.9" long. Each barrel is specially heat-treated for toughness and durability.

MSRP $199.00
Our Price: $197.75
Savings: $1.25
29 in stock!
GGP320CBLK1 GGP Slide for Sig Sauer P320 Compact V1 Black

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $418.95
Our Price: $402.25
Savings: $16.70
(Out of Stock)
GGP320CFDE1 GGP Slide for Sig Sauer P320 Compact V1 FDE

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $418.95
Our Price: $402.25
Savings: $16.70
(Out of Stock)
GGP320CGRY1 GGP Slide for Sig Sauer P320 Compact V1 Gray

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $418.95
Our Price: $402.25
Savings: $16.70
28 in stock!
GGP320FBLK1 GGP Slide for Sig Sauer P320 Fullsize V1 Black

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $429.95
Our Price: $412.75
Savings: $17.20
(Out of Stock)
GGP320FFDE1 GGP Slide for Sig Sauer P320 Fullsize V1 FDE

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $429.95
Our Price: $412.75
Savings: $17.20
12 in stock!
GGP320FGRY1 GGP Slide for Sig Sauer P320 Fullsize V1 Gray

The adoption of the P320® platform by the U.S. Military, as well as many Law Enforcement agencies, professional lead farmers, competition shooters, and firearm instructors led to the development of a new line of GGP aftermarket slides. After all, the P320’s ability to be custom tailored to the individual user’s preferences in grip length, grip size, as well as slide length and sight radius are all highly desirable features. Why stop there, when you can have even more customization options when upgrading to a drop-in GGP320 slide.

These GGP320 slides offers enhanced aesthetic features, increased grip serrations and an improved coating without compromising function. We also took our hybrid MRDS optic cut and added a third option, the SIG ROMEO1. Now you have to option to use a ROMEO1 as well as a Trijicon RMR or Leupold DeltaPoint Pro right out of the box without using bulky adapter plates that only raise the optic further above the bore axis. Available in Grey or Black DLC finish for corrosive and abrasion resistance, the GGP320 will also be available in Cerakote to better match the Coyote Tan Grip Modules used in the M17 and M18 issued pistols. The GGP320 is a drop-in install that comes with all the enhancements that professional handgun shooters have come to expect from Grey Ghost Precision.

MSRP $429.95
Our Price: $412.75
Savings: $17.20
15 in stock!