KRISS USA VECTOR AND ACCESSORIES

The PMAG 15 GL9 is a 15-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds.

High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 15rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.

The PMAG 15 GL9 is compatible with Glock G19 handguns as well as sub-compact variants with some protrusion below the grip.

Made in U.S.A.

Ambidextrous sling mount for the KRISS Vector.

Installation instructions:
Loosen the castle nut* on the buffer tube.
Carefully loosen the two 1.5mm set screws.
Unthread buffer tube from upper housing.
Place sling mount onto threaded end of buffer tube.
Reinstall buffer tube.
Carefully tighten the two set screws. Do not overtighten.
Tighten castle nut to secure sling mount and buffer tube.

The patented X-GRIP P228, P229, M11 adapts the high capacity SIG P226 magazine for use in the P228, P229, M11 pistols, incorporating the larger magazine into the compact pistol's grip, increasing the gun's capacity to 15 or 17 rounds.

The XGRIP XGS320/250C adapts the full size SIG SAUER P320/250 magazine for use in the P320/250C pistols, incorporating the larger magazine into the compact pistol’s grip, increasing the gun’s capacity. Law enforcement and military personnel can carry the P320/250C with a standard magazine when concealment is important, then insert the high capacity full size P320/250 magazine with XGRIP when firepower and capacity become critical.

Extended capacity magazine for the KRISS Vector .22LR. This magazine holds 30 rounds of .22 long rifle rimfire ammunition.

This magazine is only for use with the Vector 22. We do not guarantee fit nor function with any other firearm.

This is the factory KRISS DMK22 .22LR Magazine, available in 10 or 15 round capacities.

With this magazine your DMK22 will hold the bolt open after the last round is fired, allowing you to reload the same way you would with your AR-15.

This magazine is for the KRISS DMK22 rimfire sporting rifle, and not for use with the Vector 22.

LOADER FEATURES

- Fastest Loader Ever - Load your .45 caliber mags in under 10 seconds!
- Universal loader works with virtually all brands of pistol magazines, double or single stack.
- Load magazine directly from ammo tray or with loose ammo.
- Loader does NOT damage feed lips.
- Portable and compact. Easily fits in your range bag or pocket.
- Made in the USA and comes with a LIFETIME WARRANTY

NEW - GEN II LOADER FEATURES
- Self centering of the feed lips for both single and double stacked mags.
- Easier mag insertion
- Compatible with more mags

LOADER FEATURES
- Fastest Loader Ever - Load your 9mm and .40 caliber mags in under 10 seconds!
- Universal loader works with virtually all brands of pistol magazines, double or single stack.
- Load magazine directly from ammo tray or with loose ammo.
- Loader does NOT damage feed lips.
- Portable and compact. Easily fits in your range bag or pocket.
- Made in the USA and comes with a LIFETIME WARRANTY

Extended capacity magazine for the KRISS Vector .22LR. This magazine holds 30 rounds of .22 long rifle rimfire ammunition.

This magazine is only for use with the Vector 22. We do not guarantee fit nor function with any other firearm.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand 45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

The redesigned hinged KRISS Vector Folding Stock is compatible with both the GEN I and GEN II KRISS Vector (pre-2017) bodies and now features a metal sling loop below the body. The folding stock aids with the storage and transport of your KRISS Vector by reducing the overall length by approximately 9.5" when folded. Includes one pivot pin as pictured.

The KRISS Vector MK1 Modular Rail is designed as bolt on hand guard extension for your KRISS Vector CRB, and is made from aluminum alloy. The rail's shape follows the form factory of the KRISS Vector's body and is milled to reduce weight while still maintaining a rigid structure for support. The KRISS Vector MK1 Modular Rail features female threading along the three o'clock, six o'clock, and nine o'clock surfaces for the attachment of the included KRISS Vector Picatinny Side Rail Kit which comes pre-installed on the handguard. The MK1 Modular Rail mounts directly to the body of your KRISS Vector and will fit on GEN II models.

The KRISS Vector MK1 Modular Rail will not fit the Gen 1 Vector due to the integrated flashlight mount. Instead, please consider the MK9 or the MK11 Modular Rail.

DIMENSIONS
- Overall Length 8.375" / 213mm
- Overall Width 2" / 50.8mm
- Internal Width 1.72" / 43.7mm
- Internal Height 2.625" / 66.7mm
- Weight 8oz / 226.7g

The KRISS Vector MK1 Modular Rail is designed as bolt on hand guard extension for your KRISS Vector CRB, and is made from aluminum alloy. The rail's shape follows the form factory of the KRISS Vector's body and is milled to reduce weight while still maintaining a rigid structure for support. The KRISS Vector MK1 Modular Rail features female threading along the three o'clock, six o'clock, and nine o'clock surfaces for the attachment of the included KRISS Vector Picatinny Side Rail Kit which comes pre-installed on the handguard. The MK1 Modular Rail mounts directly to the body of your KRISS Vector and will fit on GEN II models.

The KRISS Vector MK1 Modular Rail will not fit the Gen 1 Vector due to the integrated flashlight mount. Instead, please consider the MK9 or the MK11 Modular Rail.

DIMENSIONS
- Overall Length 8.375" / 213mm
- Overall Width 2" / 50.8mm
- Internal Width 1.72" / 43.7mm
- Internal Height 2.625" / 66.7mm
- Weight 8oz / 226.7g