Kabar Products for Sale at Northern Rifleman

Made of GFN-PA66, an extra-durable plastic material, and featuring the traditional KA-BAR® oval-shaped handle, the KA-BARLEY makes light work of prying off bottle caps.  Made in the USA.

The KA-BAR Spork, which is made from food and water approved Grilamid, is equipped with a fork/spoon combo and has a 2.5" plastic serrated knife in the handle.  The knife is accessed by pulling the spork in opposite directions from each extreme end. **Hint--avoid gripping the flat panel area in the middle of the Spork--this is actually part of its lock. The tighter you hold here, the more difficult it will be for you to pull out the knife!** The Spork is 6.875" overall and has a blade length of 2.5".  It weighs 0.1 lb. Made in the USA.

The KA-BAR® Chopsticks are sold as a four pack, providing two sets of American-made, dishwasher safe chopsticks. They are made from Food and Water Safe Grilamid® and measure 9.5" overall. The chopsticks are each marked "KA-BAR" and "USA" and weigh in at a user-friendly 0.04 lbs per chopstick. Made in the USA.

The KA-BAR Krunch Spoon/Straw is the ultimate utensil for soups and cereal.  Made with food and water safe Creamid, the Krunch features a generous-sized spoon.  Inside of the Krunch is a straw, which allows you to drink your milk, soup broth, or any other liquid. The KA-BAR Krunch is made in the USA and is dishwasher safe.

The new KA-BAR Emergency Whistle delievers approximately 100 decibels of sound.  Sold as a two pack.  Made from food and water safe Creamid. Made in the USA.

The KA-BAR Skeleton Knife is a no-nonsense, lightweight knife that can be worn as a neck knife or concealed in a pocket or pack. Made of stainless steel, the KA-BAR Skeleton is 6.125" long and features a 2.5" blade. Comes with a hard plastic sheath and KA-BAR's limited lifetime warranty.

TECHNICAL SPECS
WEIGHT 0.1 lb
BLADE LENGTH 2.5 inches
OVERALL LENGTH 6.125 inches
EDGE ANGLES 18 Degrees
SHAPE Clip Point
TANG STAMP KA-BAR
KNIFE MATERIAL 5Cr15 Stainless Steel
GRIND Hollow
HANDLE MATERIAL 5Cr15 Stainless Steel
ROCKWELL HARDNESS 57-59
KNIFE MANUFACTURED IN China
SHEATH MANUFACTURED IN China
BLADE THICKNESS 0.125 inches
BLADE WIDTH 0.75 inches

The KA-BAR/Dozier Skeleton Knife is a no-nonsense, lightweight knife that can be worn as a neck knife or concealed in a pocket or pack. Made of stainless steel, the Dozier Skeleton is 6.375" long and features a 2.625" blade. Sold with a hard plastic sheath and KA-BAR's limited lifetime warranty.

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE LENGTH 2.625 inches
OVERALL LENGTH 6.375 inches
EDGE ANGLES 18 Degrees
SHAPE Drop Point
TANG STAMP KA-BAR/Dozier
KNIFE MATERIAL 5Cr15 Stainless Steel
GRIND Hollow
HANDLE MATERIAL 5Cr15 Stainless Steel
ROCKWELL HARDNESS 57-59
KNIFE MANUFACTURED IN China
SHEATH MANUFACTURED IN China
BLADE THICKNESS 0.125 inches
BLADE WIDTH 0.813 inches

An industrial engineer by training, Steve Johnson developed an interest in metallurgy and knife-making as a young boy and began making hand-made pieces for friends. He teamed up with KA-BAR a couple years back and today the Company offers several Johnson Adventure Blades through its KA-BAR Master Series. The Adventure Piggyback is a lightweight skeleton-handled knife with a recurve blade perfect for skinning small game. Hard plastic friction sheath included.

TECHNICAL SPECS
WEIGHT 0.05 lb
BLADE TYPE Fixed Blade
BLADE LENGTH 2.625 inches
OVERALL LENGTH 6 inches
EDGE ANGLES 18 Degrees
SHAPE Recurve
TANG STAMP KA-BAR/"A"
KNIFE MATERIAL 5Cr15 Stainless Steel
GRIND Flat
HANDLE MATERIAL 5Cr15 Stainless Steel
ROCKWELL HARDNESS 52-54
KNIFE MANUFACTURED IN China
SHEATH MANUFACTURED IN China
BLADE THICKNESS 0.11 inches
BLADE WIDTH 0.813 inches

In an ever-changing world, the need for preparedness has never been greater. Without notice the game can change and the rules no longer apply. Questioning your gear at a crucial moment is not an option. Whether setting up camp or securing your perimeter, the Original Zombie knives are designed to perform under the most rigorous, unexpected and apocalyptic situations. Petite skeleton-handled knife is sold with a hard plastic sheath.

TECHNICAL SPECS
WEIGHT 0.05 lb
BLADE TYPE Fixed Blade
BLADE LENGTH 3.125 inches
OVERALL LENGTH 6.375 inches
EDGE ANGLES 18 Degrees
SHAPE Recurve
TANG STAMP KA-BAR/ZK
KNIFE MATERIAL 5Cr15 Stainless Steel
GRIND Hollow
HANDLE MATERIAL 5cr15 Stainless Steel
ROCKWELL HARDNESS 52-54
KNIFE MANUFACTURED IN China
SHEATH MANUFACTURED IN China
BLADE THICKNESS 0.11 inches
BLADE WIDTH 0.719 inches

The 7001BP has a 2.5" long 5Cr15 stainless steel blade, measures 6" overall and comes with a hard plastic friction lock sheath.

TECHNICAL SPECS
WEIGHT 0.1 lb
BLADE LENGTH 2.5 inches
OVERALL LENGTH 6 inches
EDGE ANGLES 18 Degrees
SHAPE Clip Point
TANG STAMP KA-BAR/Jarosz
KNIFE MATERIAL 5Cr15 Stainless Steel
GRIND Hollow
HANDLE MATERIAL 5Cr15 Stainless Steel
ROCKWELL HARDNESS 57-59
KNIFE MANUFACTURED IN China
SHEATH MANUFACTURED IN China
BLADE THICKNESS 0.125 inches
BLADE WIDTH 0.813 inches

The KA-BAR® Backpack Kaster, an American-made, lightweight fishing system designed to tag along on all your outdoor adventures is made from Ultramid® and weighs 0.25 lb.  It is comprised of three main components. The handle is inspired by the iconic KA-BAR USMC Fighting/Utility Knife and has a hollow storage compartment for extra line and lures. The head of the Kaster is where your fishing line attaches, and a plastic clamp-like device is included to secure your line in place when not in use. To learn how to load and cast the KA-BAR® Backpack Kaster and pick up tips on tying a highly effective slip knot, be sure to visit KA-BAR on Vimeo. https://vimeo.com/268652885 https://vimeo.com/268657182 Made in the USA.  Fishing line and lure not included. The KA-BAR® Backpack Kaster holds the following fishing line: 8lbs = 100 yds @.011" dia. 10lbs = 90 yds @.012" dia.

With an overall profile about the size of a credit card, this knife can be concealed just about anywhere. Pin it under a tactical vest strap, carry it in your wallet or lash it down with your boot laces. This backup knife is intended to be readily available as your "Last Ditch" attempt at defense when all other weapons have been removed. Sold with a hard plastic friction sheath and black cord. Handle Color: Black

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE TYPE Fixed Blade
EDGE ANGLES 18 Degrees
SHAPE Drop Point
TANG STAMP KA-BAR/TDI
KNIFE MATERIAL 9Cr18 Stainless Steel
GRIND Flat
HANDLE MATERIAL 9Cr18 Stainless Steel
ROCKWELL HARDNESS 58-59CR
KNIFE MANUFACTURED IN Taiwan
SHEATH MANUFACTURED IN Taiwan
BLADE THICKNESS 0.078 inches
BLADE WIDTH 0.78 inches

Modestly sized folder fits perfectly in your pocket. Tremendous bang for the buck with KA-BAR's limited lifetime warranty.

TECHNICAL SPECS
WEIGHT 0.3 lb
BLADE TYPE Folder
BLADE LENGTH 3 inches
OVERALL LENGTH 7.563 inches
SHAPE Warthog
TANG STAMP KA-BAR
KNIFE MATERIAL 420 Stainless Steel
LOCK STYLE Liner Lock
GRIND Hollow
HANDLE MATERIAL G10
ROCKWELL HARDNESS 52-54
KNIFE MANUFACTURED IN China
BLADE THICKNESS 0.11 inches
BLADE WIDTH 1.125 inches

The Field Kit Spork Set is perfect for camping, hiking, picnics, storing in gloveboxes and packs, and eating on the go.  Made from food and water safe Creamid®, the Sporks are dishwasher safe. The Sporks feature a spoon/fork combination at the base and a serrated knife internally. The knife is accessed by pulling on both ends of the Spork. The overall length of each spork is 6.875”.  The blade length of the knife is 2.5”. Made in the USA.

The KA-BAR Throwing Knife Set features three throwing knives and a polyester storage pouch.  The Throwing Knives are made of 3Cr13 steel and are marked with the KA-BAR Skull logo.  Stock up on this throwing knife set and limit your time walking back and forth to your target!  Please note throwing knives are not sharpened.

The KA-BAR Gun Tool is a must have for your range bag.  A variety of hardware make the Gun Tool vital when working on your firearm, knife, and countless other items.  The handle is made of aluminum and has an aquamarine color.  The tools are made of S2.  The bits are held inside the frame magnetically. The tools are: Allen Head: 1/8", 3/32", 5/32", 0005 Flat Head: 1F-2R, 6F-7R Phillips Head: #2 Punch: 006, 120 Torque: T8, T10, T15, T20

Portable fork, knife and spoon with nylon carrying case is designed for on-the-go or outdoor dining. All three utensils slide apart and back together for an all-in-one dining kit. Just toss in a backpack or glove compartment.

Award-winning lock back designed by Bob Dozier is an affordable, practical all-purpose knife appropriate for daily tasks. Features a reversible pocket clip and thumb stud. Handle Color: Black

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE TYPE Folder
BLADE LENGTH 3 inches
OVERALL LENGTH 7.25 inches
SHAPE Drop Point
TANG STAMP KA-BAR/Dozier
KNIFE MATERIAL AUS 8A Stainless Steel
LOCK STYLE Lockback
GRIND Hollow
HANDLE MATERIAL Zytel®
ROCKWELL HARDNESS 56-58CR
KNIFE MANUFACTURED IN Taiwan
BLADE THICKNESS 0.11 inches
BLADE WIDTH 0.875 inches

Award-winning lock back designed by Bob Dozier is an affordable, practical all-purpose knife appropriate for daily tasks. Features a reversible pocket clip and thumb stud.

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE TYPE Folder
BLADE LENGTH 3 inches
OVERALL LENGTH 7.25 inches
SHAPE Drop Point
TANG STAMP KA-BAR/Dozier
KNIFE MATERIAL AUS 8A Stainless Steel
LOCK STYLE Lockback
GRIND Hollow
HANDLE MATERIAL Zytel®
ROCKWELL HARDNESS 56-58CR
KNIFE MANUFACTURED IN Taiwan
BLADE THICKNESS 0.11 inches
BLADE WIDTH 0.875 inches

Award-winning lock back designed by Bob Dozier is an affordable, practical all-purpose knife appropriate for daily tasks. Features a reversible pocket clip and thumb stud.

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE TYPE Folder
BLADE LENGTH 3 inches
OVERALL LENGTH 7.25 inches
SHAPE Drop Point
TANG STAMP KA-BAR/Dozier
KNIFE MATERIAL AUS 8A Stainless Steel
LOCK STYLE Lockback
GRIND Hollow
HANDLE MATERIAL Zytel®
ROCKWELL HARDNESS 56-58CR
KNIFE MANUFACTURED IN Taiwan
BLADE THICKNESS 0.11 inches
BLADE WIDTH 0.875 inches

Award-winning lock back designed by Bob Dozier is an affordable, practical all-purpose knife appropriate for daily tasks. Features a reversible pocket clip and thumb stud.

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE TYPE Folder
BLADE LENGTH 3 inches
OVERALL LENGTH 7.25 inches
SHAPE Drop Point
TANG STAMP KA-BAR/Dozier
KNIFE MATERIAL AUS 8A Stainless Steel
LOCK STYLE Lockback
GRIND Hollow
HANDLE MATERIAL Zytel®
ROCKWELL HARDNESS 56-58CR
KNIFE MANUFACTURED IN Taiwan
BLADE THICKNESS 0.11 inches
BLADE WIDTH 0.875 inches

Award-winning lock back designed by Bob Dozier is an affordable, practical all-purpose knife appropriate for daily tasks. Features a reversible pocket clip and thumb stud.

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE TYPE Folder
BLADE LENGTH 3 inches
OVERALL LENGTH 7.25 inches
SHAPE Drop Point
TANG STAMP KA-BAR/Dozier
KNIFE MATERIAL AUS 8A Stainless Steel
LOCK STYLE Lockback
GRIND Hollow
HANDLE MATERIAL Zytel®
ROCKWELL HARDNESS 56-58CR
KNIFE MANUFACTURED IN Taiwan
BLADE THICKNESS 0.11 inches
BLADE WIDTH 0.875 inches

A thumb-notched blade makes this nicely priced folder even easier to open and use. Designed by Bob Dozier. Features a reversible pocket clip.

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE TYPE Folder
BLADE LENGTH 3 inches
OVERALL LENGTH 7.25 inches
SHAPE Clip Point
TANG STAMP KA-BAR/Dozier
KNIFE MATERIAL AUS 8A Stainless Steel
LOCK STYLE Lockback
GRIND Hollow
HANDLE MATERIAL Zytel®
ROCKWELL HARDNESS 56-58CR
KNIFE MANUFACTURED IN Taiwan
BLADE THICKNESS 0.11 inches
BLADE WIDTH 1 inches

The 5698SF Corser Folder has a tanto blade shape and reversible pocket clip. The lockback knife has a blue GFN-PA66 hard plastic handle and an AUS 8A stainless steel blade that is coated in grey powder coating. The Corser is 7.875” overall when open and has a 3.5” blade.

TECHNICAL SPECS
WEIGHT 0.2 lb
BLADE TYPE Folder
BLADE LENGTH 3.5 inches
OVERALL LENGTH 7.875 inches
EDGE ANGLES 20
SHAPE Tanto
TANG STAMP KA-BAR/USSF
KNIFE MATERIAL AUS 8A Stainless Steel
LOCK STYLE Lockback
GRIND Flat
HANDLE MATERIAL Blue GFN-PA66
ROCKWELL HARDNESS 56-58
KNIFE MANUFACTURED IN Taiwan
BLADE THICKNESS 0.114 inches
BLADE WIDTH 0.875 inches

Bob Dozier is known in the knife industry as "Dr. D2" for his use of D2 steel in his custom knives. KA-BAR is proud to bring Bob's steel of choice to an affordable, production EDC folding knife. Reversible pocket clip and thumb stud.

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE TYPE Folding Knife
BLADE LENGTH 3 inches
OVERALL LENGTH 7.25 inches
SHAPE Drop Point
TANG STAMP KA-BAR/Dozier
KNIFE MATERIAL D2
LOCK STYLE Lockback
GRIND Hollow
HANDLE MATERIAL Zytel
ROCKWELL HARDNESS 57-59
KNIFE MANUFACTURED IN Taiwan
BLADE THICKNESS 0.11 inches
BLADE WIDTH 0.875 inches

The Investigator is the pefect low profile EDC (Everyday Carry) fixed blade. Lightweight and compact, the Investigator is perfect on a belt, in a bag, or stashed in a glovebox. Please note a hard plastic sheath and clip is included. The sheath is ambidextrous and also fits the KA-BAR TDI 1477CB, 1480, and 1481.

TECHNICAL SPECS
WEIGHT 0.15 lb
BLADE TYPE Fixed Blade
BLADE LENGTH 2.71 inches
OVERALL LENGTH 5 inches
EDGE ANGLES 30-40
SHAPE Drop Point
TANG STAMP KA-BAR/TDI
KNIFE MATERIAL AUS 8A Stainless
GRIND Hollow
HANDLE MATERIAL Nylon/Fiberglass
ROCKWELL HARDNESS 57-59
KNIFE MANUFACTURED IN Taiwan
SHEATH MANUFACTURED IN Taiwan
BLADE THICKNESS 0.12 inches
BLADE WIDTH 1.25 inches

The KA-BAR Forged Wrench Knife is made with 425 High Carbon Stainless Steel. Due to the forging process, each knife will have a unique look. Includes a hard plastic sheath. Handle Color: Gray

TECHNICAL SPECS
WEIGHT 0.2 lb
BLADE TYPE Fixed Blade
BLADE LENGTH 3 inches
OVERALL LENGTH 7.125 inches
EDGE ANGLES 20 SHAPE Drop Point T
ANG STAMP KA-BAR
KNIFE MATERIAL 425 High Carbon Stainless
GRIND Flat
HANDLE MATERIAL 425 High Carbon Stainless Steel
ROCKWELL HARDNESS 56-58
KNIFE MANUFACTURED IN United States
SHEATH MANUFACTURED IN United States
BLADE THICKNESS 0.188 inches
BLADE WIDTH 1.188 inches

In extreme close-quarter encounters where a suspect is attempting to take an officer's handgun, or an officer cannot access his or her handgun, the TDI knife is available as a "last option" knife. When worn on the pant belt the entire unit - knife and sheath - is well concealed. Designed by John Benner, founder and owner of Tactical Defense Institute. Hard plastic sheath and reversible black metal belt clip (1480CLIP) included. Fits maximum belt height of 1.75", width of 1.25" and thickness of 0.25". Handle Color: Black

TECHNICAL SPECS
WEIGHT 0.2 lb
BLADE TYPE Fixed Blade
BLADE LENGTH 2.313 inches
OVERALL LENGTH 5.625 inches
SHAPE Drop Point
TANG STAMP KA-BAR/TDI
KNIFE MATERIAL AUS 8A Stainless Steel
GRIND Hollow
HANDLE MATERIAL Zytel®
ROCKWELL HARDNESS 57-59CR
KNIFE MANUFACTURED IN Taiwan
SHEATH MANUFACTURED IN Taiwan
BLADE THICKNESS 0.125 inches
BLADE WIDTH 1.25 inches

In extreme close-quarter encounters where a suspect is attempting to take an officer's handgun, or an officer cannot access his or her handgun, the TDI knife is available as a "last option" knife. When worn on the pant belt the entire unit - knife and sheath - is well concealed. Designed by John Benner, founder and owner of Tactical Defense Institute. Features a fully serrated blade for cutting looped and synthetic materials. Hard plastic sheath and reversible black metal belt clip (1480CLIP) included. Fits maximum belt height of 1.75", width of 1.25" and thickness of 0.25". Handle Color: Black

TECHNICAL SPECS
WEIGHT 0.2 lb
BLADE TYPE Fixed Blade
BLADE LENGTH 2.313 inches
OVERALL LENGTH 5.625 inches
SHAPE Drop Point
TANG STAMP KA-BAR/TDI
KNIFE MATERIAL AUS 8A Stainless Steel
GRIND Hollow
HANDLE MATERIAL Zytel®
ROCKWELL HARDNESS 57-59CR
KNIFE MANUFACTURED IN Taiwan
SHEATH MANUFACTURED IN Taiwan
BLADE THICKNESS 0.125 inches
BLADE WIDTH 1.25 inches

A larger version of our very popular TDI Law Enforcement Knife. Sold with MOLLE compatible hard plastic sheath that is fitted with reversible nylon webbing straps to mount to pant and duty belts, tactical vests, and more. Handle Color: Black

TECHNICAL SPECS
WEIGHT 0.4 lb
BLADE TYPE Fixed Blade
BLADE LENGTH 3.688 inches
OVERALL LENGTH 7.563 inches
SHAPE Drop Point
TANG STAMP KA-BAR/TDI
KNIFE MATERIAL AUS 8A Stainless Steel
GRIND Hollow
HANDLE MATERIAL Zytel®
ROCKWELL HARDNESS 57-59CR
KNIFE MANUFACTURED IN Taiwan
SHEATH MANUFACTURED IN Taiwan
BLADE THICKNESS 0.188 inches
BLADE WIDTH 1.25 inches