Kriss Products for Sale at Northern Rifleman

Black AR15 Grip by Kriss USA

Ambidextrous sling mount for the KRISS Vector.

Installation instructions:
Loosen the castle nut* on the buffer tube.
Carefully loosen the two 1.5mm set screws.
Unthread buffer tube from upper housing.
Place sling mount onto threaded end of buffer tube.
Reinstall buffer tube.
Carefully tighten the two set screws. Do not overtighten.
Tighten castle nut to secure sling mount and buffer tube.

This is the factory KRISS DMK22 .22LR Magazine, available in 10 or 15 round capacities.

With this magazine your DMK22 will hold the bolt open after the last round is fired, allowing you to reload the same way you would with your AR-15.

This magazine is for the KRISS DMK22 rimfire sporting rifle, and not for use with the Vector 22.

Extended capacity magazine for the KRISS Vector .22LR. This magazine holds 30 rounds of .22 long rifle rimfire ammunition.

This magazine is only for use with the Vector 22. We do not guarantee fit nor function with any other firearm.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

This is the OEM front flip sight that is equipped with the KRISS Vector and DEFIANCE firearms. This sight is extremely low profile, designed to tuck completely out of vision when folded, sitting a mere 12.7mm above the rail surface. The DEFIANCE Front Sight features a very wide range of elevation adjustment, accommodating for a large spectrum of firearms with various height over bore and sight radius measurements. Finally, the large, textured, adjustment knob makes elevation changes with gloves simple and easy.

DIMENSIONS
Length Folded 2.0" / 50.8mm
Width at Base 1.19" / 30.22mm
Width at Body 0.96" / 24.38mm
Height Folded 0.50" / 12.7mm
Weight 0.50oz / 14.17g

The DEFIANCE DS150 Stock fits AR milspec buffer tubes. Sockets capable of accepting a QD sling mount can be found on the left and right side of the stock and a removable rubber shock pad is preinstalled. Buffer tube not included.

DIMENSIONS
Overall Length 7.125" / 180.98mm
Overall Width 1.5" / 38.3mm
Weight 14oz / 400g

This is the OEM polymer rear flip sight that is equipped with the KRISS Vector and DEFIANCE firearms. This sight is extremely low profile, designed to tuck completely out of vision when folded, sitting a mere 14.22mm above the rail surface. The DEFIANCE Rear Sight features two apertures, 1.5mm diameter and 4.5mm diameter, for different lighting and shooting conditions. Additionally, the rear sight folds down completely flat regardless which aperture is in use, in order to be as user friendly as possible. Finally, the large, textured, adjustment knob makes windage changes with gloves simple and easy.

DIMENSIONS
Length Folded 2.25" / 57.25mm
Width at Base 1.19" / 30.22mm
Width at Body 1.19" / 30.22mm
Height Folded .56" / 14.22mm
Weight 0.75oz / 21.26g
Large Aperture Dia. .18" / 4.5mm
Small Aperture Dia. 0.06" / 1.5mm

The DEFIANCE DS150 Stock fits AR milspec buffer tubes. Sockets capable of accepting a QD sling mount can be found on the left and right side of the stock and a removable rubber shock pad is preinstalled. Buffer tube not included.

Cerakote® finished in Flat Dark Earth to match your KRISS Vector or DEFIANCE DMK22 model.

DIMENSIONS
Overall Length 7.125" / 180.98mm
Overall Width 1.5" / 38.3mm
Weight 14oz / 400g

This is the OEM front flip sight that is equipped with the KRISS Vector and DEFIANCE firearms. This sight is extremely low profile, designed to tuck completely out of vision when folded, sitting a mere 12.7mm above the rail surface. The DEFIANCE Front Sight features a very wide range of elevation adjustment, accommodating for a large spectrum of firearms with various height over bore and sight radius measurements. Finally, the large, textured, adjustment knob makes elevation changes with gloves simple and easy.

DIMENSIONS
Length Folded 2.0" / 50.8mm
Width at Base 1.19" / 30.22mm
Width at Body 0.96" / 24.38mm
Height Folded 0.50" / 12.7mm

This is the OEM polymer rear flip sight that is equipped with the KRISS Vector and DEFIANCE firearms. This sight is extremely low profile, designed to tuck completely out of vision when folded, sitting a mere 14.22mm above the rail surface. The DEFIANCE Rear Sight features two apertures, 1.5mm diameter and 4.5mm diameter, for different lighting and shooting conditions. Additionally, the rear sight folds down completely flat regardless which aperture is in use, in order to be as user friendly as possible. Finally, the large, textured, adjustment knob makes windage changes with gloves simple and easy.

DIMENSIONS
Length Folded 2.25" / 57.25mm
Width at Base 1.19" / 30.22mm
Width at Body 1.19" / 30.22mm
Height Folded .56" / 14.22mm
Large Aperture Dia. .18" / 4.5mm
Small Aperture Dia. 0.06" / 1.5mm

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 10 MM Glock 20 magazine. The MagEx adds additional round capacity to your G20 magazine for a total of 33 rounds.

The MagEx maintains functionality with your 10 MM Glock pistol. This kit is only intended for use with factory Glock brand .10 MM Glock 20 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 20 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 45 ACP Glock 21 magazine. The MagEx adds additional round capacity to your G21 magazine for a total of 30 rounds.

The MagEx maintains functionality with your 45 ACP Glock pistol. This kit is only intended for use with factory Glock brand .45 ACP Glock 21 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 21 magazine not included.

The original KRISS MagEx Kit is a magazine extension kit for your 9 MM Glock 17 magazine. The MagEx adds additional round capacity to your G17 magazine for a total of 40 rounds.

The MagEx maintains functionality with your 9 MM Glock pistol. This kit is only intended for use with factory Glock brand 9 MM Glock 17 magazines. We cannot guarantee fit nor function with aftermarket magazines nor other calibers.

*Glock 17 magazine not included.

The redesigned hinged KRISS Vector Folding Stock is compatible with both the GEN I and GEN II KRISS Vector (pre-2017) bodies and now features a metal sling loop below the body. The folding stock aids with the storage and transport of your KRISS Vector by reducing the overall length by approximately 9.5" when folded. Includes one pivot pin as pictured.

The KRISS Vector MK1 Modular Rail is designed as bolt on hand guard extension for your KRISS Vector CRB, and is made from aluminum alloy. The rail's shape follows the form factory of the KRISS Vector's body and is milled to reduce weight while still maintaining a rigid structure for support. The KRISS Vector MK1 Modular Rail features female threading along the three o'clock, six o'clock, and nine o'clock surfaces for the attachment of the included KRISS Vector Picatinny Side Rail Kit which comes pre-installed on the handguard. The MK1 Modular Rail mounts directly to the body of your KRISS Vector and will fit on GEN II models.

The KRISS Vector MK1 Modular Rail will not fit the Gen 1 Vector due to the integrated flashlight mount. Instead, please consider the MK9 or the MK11 Modular Rail.

DIMENSIONS
- Overall Length 8.375" / 213mm
- Overall Width 2" / 50.8mm
- Internal Width 1.72" / 43.7mm
- Internal Height 2.625" / 66.7mm
- Weight 8oz / 226.7g

The KRISS Vector MK1 Modular Rail is designed as bolt on hand guard extension for your KRISS Vector CRB, and is made from aluminum alloy. The rail's shape follows the form factory of the KRISS Vector's body and is milled to reduce weight while still maintaining a rigid structure for support. The KRISS Vector MK1 Modular Rail features female threading along the three o'clock, six o'clock, and nine o'clock surfaces for the attachment of the included KRISS Vector Picatinny Side Rail Kit which comes pre-installed on the handguard. The MK1 Modular Rail mounts directly to the body of your KRISS Vector and will fit on GEN II models.

The KRISS Vector MK1 Modular Rail will not fit the Gen 1 Vector due to the integrated flashlight mount. Instead, please consider the MK9 or the MK11 Modular Rail.

DIMENSIONS
- Overall Length 8.375" / 213mm
- Overall Width 2" / 50.8mm
- Internal Width 1.72" / 43.7mm
- Internal Height 2.625" / 66.7mm
- Weight 8oz / 226.7g

The KRISS Vector Ambidextrous Folding Stock is designed for the Vector GEN II 2017. The stock is constructed of steel, aluminum, and advanced polymer composites. The KRISS Vector Ambidextrous Folding Stock secures to the upper receiver with a push button hinge that will fold to the right, this hinge can also be configured to fold to the left. The stock features two QD sling swivel mounts on the left and right side, as well as a sling loop towards the rear. In addition to folding, this stock is also telescopic, adjusting to three positions.

This item is classified as a stock and will convert a Vector SDP (pistol) into a Short Barreled Rifle. It is your responsibility to maintain a compliant firearm.

This stock is only compatible with the KRISS Vector GEN II 2017 Upper Receiver. For Pre-2017 KRISS Vector models, please see the KRISS Vector Folding Stock Assembly.

OVERALL LENGTH
Position 1 8.5" / 216mm
Position 2 9.5" / 241mm
Position 3 10.5" / 266mm

The Innovative KRISS Super V System

The KRISS Super V Recoil Mitigation System uses an innovative nonlinear operating system that revectors energy down and away from the shooter’s shoulder to dramatically reduce felt recoil and muzzle climb. This system allows the shooter to recover faster, for quicker and more accurate sequential shots.

Designed To Work With You

An extremely low bore axis compliments the KRISS Super V Recoil Mitigation System by aligning the barrel with the user’s arm. This allows the user's body to work together with the KRISS Super V System for maximum control.

Caliber Interchangeability

The latest generation of KRISS Vectors are capable of changing calibers to the user’s preference. Tool-less disassembly lets the user quickly change between lower receivers of different calibers in a matter of seconds.

Glock™ Magazine Compatible

The KRISS Vector is designed to use the reliable and ubiquitous standard Glock™ magazines. Allowing you to share the same equipment and makes it easy to adopt into any system or loadout.

Threaded For Attachments

The KRISS Vector SDP comes with a standard threaded muzzle for the option of attaching your favorite muzzle device or suppressor.

Ready To Go With You

A quick detachable sling point located on the back end of the pistol lets you easily attach and detach a sling. This makes it easy to deploy and easy to store when you need it.