Large Selection of Long Gun Parts

The ALG AK Braided Main Spring is a replacement spring for the AK47/74 platform rifles. This replacement option is manufactured in the United States from three strands of music wire braided together.

The ALG High Energy Main Spring is a performance replacement spring for the AK47/74 platform rifles. It is a Chrome Silicon single wire spring fabricated per ASTM A401 specifications. The ALG High Energy Mainspring develops 25% more torque over a standard factory main spring, lowering lock time and also increasing the consistency of primer ignition.

ALG AK recoil spring is a one of a kind design, it is manufactured from chrome silicon steel resist impact shock and relaxation. The 2 to 3 dead coils in the center change the natural frequency of the spring, which prevents harmonics from damaging the spring and reducing its free length.

9mm Carbine Buffer Body

Specs:
- Diameter: .778
- OAL: 3.25″
- Weight: 5.45 oz

• Designed to Fit Ruger 10/22 Rifle
• Free Float Rail Does not Touch Barrel or Forend
• Clever Ventilation Holes for Weight Reduction and Attractive Tactical Appearance
• Precision Machined Special Slot to Accommodate Rear Iron Sight
• Easily Bolts on to Upper Receiver

Material: Aluminum
Weight: 4 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 11.7 inch
Width: 1.16 inch
Height: 0.9 inch

The SGA 590A1 SGA Shotgun Stock and one-point clip-in style attachments such as the MS3 Paraclip™, the HK® hook, ITW™ MASH hook, and others. Made from precision cast steel that is Melonite® treated for wear and corrosion resistance. Dedicated fit for the Magpul SGA Stock, the Receiver Sling Mount can be installed on either the left or right side of the front of the stock.

Made in the USA.

STEEL CONSTRUCTION

Solid steel construction with durable melonite coating

MOUNTS ON EITHER SIDE OF YOUR STOCK

Can be installed on either the left or right side of the front of the stock

UPGRADE FOR YOUR MOSSBURG

Connection point for the Mossberg 500/590/590A1 SGA Shotgun Stock

• Solid High Quality Integral Steel Base with Matte black Finish
• Precision Made to Fit Model 700 Long Action Rifles
• 6 Picatinny Slots on Top for Convenient Scope Mounting
• Half Cut in Mid Section for Shell Rejection
• Locking Screws Included

Material: Steel
Weight: 4.6 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 6.3 inch

• Robust Steel Construction
• Solid Integral Base with 6 Picatinny Slots on Top
• Half Cut in Mid Section for Shell Rejection
• Locking Screws Included
• Fits Remington Model 700 Short Action Rifle

Material: Steel
Weight: 4.3 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 5.47 inch

The Magpul MOE-EVO Grip is an optimized drop-in upgrade to the CZ Scorpion EVO 3 family of pistols and carbines. Featuring an enhanced grip angle and Magpul's proprietary TSP texture on contact surfaces, the MOE-EVO Grip gives users unsurpassed comfort, control, and durability. This lightweight and ergonomic grip builds on the legacy of Magpul's MOE AR and AK grips to provide CZ Scorpion EVO 3 users positive control in all conditions, with or without gloves.

Qualifyies as one U.S.-made part for 922(r) compliance.

Made in the USA.

OPTIMAL GRIP ANGLE

Optimized grip angle allows enhanced control with short LOP stocks and pistol configurations, either with or without a brace

TSP TEXTURING FOR POSITIVE WEAPON CONTROL

Aggressive TSP grip texture increases weapon retention in all environments and is substantially more durable than grip tape

ERGONOMIC DESIGN

Ergonomic design mitigates fatigue and ensures ease of access to weapon controls while maintaining a secure grip

RUGGED POLYMER CONSTRUCTION

High-strength injection-molded polymer construction

Easily installs with a 3mm hex wrench

The Magpul MOE-EVO Enhanced Magazine Release is a durable and affordable ambidextrous upgrade to the standard magazine release for the CZ Scorpion EVO 3 family of pistols and carbines. The paddle design allows for easy, one-handed activation and magazine extraction, maximizing economy of movement.

Durable, lightweight, high-strength polymer construction. Its increased surface area allows for better purchase and positive release activation while remaining low-profile, and textured ridges and an easy-to-reach paddle allow ambidextrous use, with or without gloves. It includes an optimized lever angle for positive activation.

Installs easily with a 5/32" roll pin punch.

Made in the USA.

ENHANCED FUNCTIONALITY

Increased surface area allows for better purchase and positive release activation while remaining low-profile

Textured ridges and an easy-to-reach paddle allow ambidextrous use, with or without gloves

Optimized lever angle for positive activation

RUGGED CONSTRUCTION

Durable, lightweight, high-strength polymer construction

The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590 / 590A1* 12ga shotguns, featuring an extended length and front / rear hand stops for improved weapon manipulation.

Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting, home defense, or on duty use.

Installation wrench included.

Made in the U.S.A.

INCREASED LENGTH FOR IMPROVED PUMP MANIPULATION

RUGGED POLYMER & M-LOK

Reinforced polymer construction

M-LOK slots for direct attachment of accessories

NARROW PROFILE REDUCES SNAGGING

Does not overlap receiver for sidesaddle compatibility

The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590 / 590A1* 12ga shotguns, featuring an extended length and front / rear hand stops for improved weapon manipulation.

Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting, home defense, or on duty use.

Installation wrench included.

Made in the U.S.A.

INCREASED LENGTH FOR IMPROVED PUMP MANIPULATION

RUGGED POLYMER & M-LOK

Reinforced polymer construction

M-LOK slots for direct attachment of accessories

NARROW PROFILE REDUCES SNAGGING

Does not overlap receiver for sidesaddle compatibility

The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590 / 590A1* 12ga shotguns, featuring an extended length and front / rear hand stops for improved weapon manipulation.

Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting, home defense, or on duty use.

Installation wrench included.

Made in the U.S.A.

INCREASED LENGTH FOR IMPROVED PUMP MANIPULATION

RUGGED POLYMER & M-LOK

Reinforced polymer construction

M-LOK slots for direct attachment of accessories

NARROW PROFILE REDUCES SNAGGING

Does not overlap receiver for sidesaddle compatibility

LOADER FEATURES
- The first truly universal loader for rifle mags
- Load the following mags: AR15, AR10, AK47, AK74, FN SCAR-16/17, G36, Steyr Aug, MP5, Scorpion EVO, Colt SMG, UZI and more...
- Loads the following calibers: 5.56 x 45 / .223, .308, 7.62 x 39, 300BLK, 5.45 x 39, 9mm (rifle) and more...
- Loader easily picks up rounds directly from ammo tray, 20 round boxes, or can also be used to load loose ammo.
- Made from a durable polymer that will hold up to wear and tear.
- Portable and fits easily into your range bag or your pocket.

The X-22 Backpacker Forend is intended for use with additional barrels for rifles currently equipped with the X-22 Backpacker Stock, MAG808. Its minimalist design offers a convenient package without compromising shooting performance. It is compatible with factory and aftermarket barrels up to 0.92" outer diameter. Constructed of a durable advanced polymer, the X-22 Backpacker Forend features a unique locking interface to attach the barrel assembly to the stock body when being transported.

Made in the USA.

RUGGED CONSTRUCTION

Reinforced polymer construction for strength and durability

Ergonomic hand guard

BARREL OPTIONS

Unique locking interface to attach the barrel assembly to the stock body when being transported

Compatible with factory and aftermarket barrels, up to 0.92" OD

The X-22 Backpacker Forend is intended for use with additional barrels for rifles currently equipped with the X-22 Backpacker Stock, MAG808. Its minimalist design offers a convenient package without compromising shooting performance. It is compatible with factory and aftermarket barrels up to 0.92" outer diameter. Constructed of a durable advanced polymer, the X-22 Backpacker Forend features a unique locking interface to attach the barrel assembly to the stock body when being transported.

Made in the USA.

RUGGED CONSTRUCTION

Reinforced polymer construction for strength and durability

Ergonomic hand guard

BARREL OPTIONS

Unique locking interface to attach the barrel assembly to the stock body when being transported

Compatible with factory and aftermarket barrels, up to 0.92" OD

The X-22 Backpacker Forend is intended for use with additional barrels for rifles currently equipped with the X-22 Backpacker Stock, MAG808. Its minimalist design offers a convenient package without compromising shooting performance. It is compatible with factory and aftermarket barrels up to 0.92" outer diameter. Constructed of a durable advanced polymer, the X-22 Backpacker Forend features a unique locking interface to attach the barrel assembly to the stock body when being transported.

Made in the USA.

RUGGED CONSTRUCTION

Reinforced polymer construction for strength and durability

Ergonomic hand guard

BARREL OPTIONS

Unique locking interface to attach the barrel assembly to the stock body when being transported

Compatible with factory and aftermarket barrels, up to 0.92" OD

The X-22 Backpacker Forend is intended for use with additional barrels for rifles currently equipped with the X-22 Backpacker Stock, MAG808. Its minimalist design offers a convenient package without compromising shooting performance. It is compatible with factory and aftermarket barrels up to 0.92" outer diameter. Constructed of a durable advanced polymer, the X-22 Backpacker Forend features a unique locking interface to attach the barrel assembly to the stock body when being transported.

Made in the USA.

RUGGED CONSTRUCTION

Reinforced polymer construction for strength and durability

Ergonomic hand guard

BARREL OPTIONS

Unique locking interface to attach the barrel assembly to the stock body when being transported

Compatible with factory and aftermarket barrels, up to 0.92" OD

The AG-47 Ergonomic Pistol Grip provides enhanced grip and improved weapon handling for your AK-47/74.

Advantages:
- Ergonomic design prevents wrist fatigue and ensures secure grip
- Improves trigger operation
- Built-In storage compartment with removable 2x CR123 battery holder
- Made of MIL-SPEC fiberglass reinforced polymer composite
- Finger grooves and backstrap shape for enhanced, more comfortable grip

Compatibility: AK-47/74, AKS-74U 'Krinkov', Galil Models

The AGR-47 is the latest addition to our line of Pistol Grips featuring State-of-the Art Multi-Textured Rubber, enhancing your grip experience. Incorporated into its design, is the superior contour of its predecessor, adding even more comfort and proper ventilation needed in extreme heat and moist environments, giving you the edge you need in the field or at the range.

Advantages:
- Fiberglass reinforced polymer composite with a multi-textured rubber overmold
- Three Different Rubber Overmolded Style Textures; Rib Studded at Palm, Alligator Pattern for front Fingers and Moon Surface Textured Sides
- Multi Rubber Texture Provides Superior Comfort; Adds Appropriate Ventilation, Prevents Slip and Reduces Sweaty Palms
- Finger grooves and backstrap shape for enhanced, more comfortable grip
- Extended Beavertail for Better Control, Allowing a Higher Firmer Hold
- Readily Accessible Storage Area with Securely Sealed Hinged Door

Compatibility: AK-47/74, AKS-74U 'Krinkov', Galil Models