Submit search
The PMAG 30 AR/M4 GEN M2 MOE is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI. It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability.
Made in U.S.A.
The TZ-2 is a durable & light-weight polymer magazine coupler, made for secure magazine operation and rapid magazine change. Advantages: - Facilitates swift magazine change - Durable and Light-Weight fiberglass reinforced polymer construction - Quick & Easy installation- Improves operational efficiency and performance Compatibility: - M16/M4/AR15 - AK-47, Galil - H&K 33,53 - Ruger Mini M14 - Sig 542,543
• Proudly Designed and Made in USA • Glass Fiber Reinforced Matte Black Polymer • Impact and Heat Resistant • Four-way Anti-Tilt High Visibility Blue Follower • Molded Over Travel Stop and Grip Texturing • Reliable Feeding High Longevity Stainless Steel Spring • Open Surface Areas for Applying Grip Tape • Removable Flared Floor Plate NOTE: This product cannot be shipped to: California, Colorado, Connecticut, District of Columbia, Hawaii, Massachusetts, Maryland, New Jersey, New York, and Vermont.
Aluminum Body: Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades! Available Coatings: Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey,FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine. Assembly Components: - 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III - Chrome Silicon Springs - Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey - 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed BlackCannot ship to the following states: CA, CT, HI, MD, MA, NY, NJ, CO and Cook County, IL.
Aluminum Body: Our AR-15/M4/M16 magazines go above and well beyond the industry standard. With the use of cutting-edge robotic manufacturing technology, and our commitment to construct our magazines with only the highest quality USA materials, you are guaranteed a high-quality result. Our lightweight aluminum magazines are manufactured 100% start to finish in the USA using 6061 grade aluminum, heat treated to a condition of T6, and hard-coat anodized per MIL-A-8625 Type III class I. The result is a dependable, long lasting magazine that Functions flawlessly. There’s a reason why these have been in military service for decades! Available Coatings: Our Aluminum AR-15/M4/M16 magazines are available in hard-coat anodized Grey, FDE, or Black. These hard-coat anodized finishes are Teflon® impregnated which provides a non-marring, sleek, uniform finish. All of these coatings are tested, and proven to offer supreme performance and protection for your magazine. Assembly Components: - 6061 Aluminum Body, heat treated to T6 Condition, Hard Anodized per MIL-A-8625 Type III - Chrome Silicon Springs - Mil-Spec Polymer Followers – Available in Black, Green, Orange, or Grey - 6061 Aluminum Floor plate Hard Andozide per MIL-A-8625 Type III, dyed Black
• Durable and Impact Resistant Glass Fiber Reinforced Matte Black Polymer Construction • Four-way Anti-tilt High Visibility Blue Follower and High Longevity Stainless Steel Spring for Reliable Feeding • Positive Grip Textured and Left and Right Side Windowed Main Body with Remaining Round Count Indicators, Over-insertion Stop, and Removable Flared Floor Plate NOTE: This product cannot be shipped to: California, Colorado, Connecticut, District of Columbia, Hawaii, Massachusetts, Maryland, New Jersey, New York, and Vermont.
The PMAG 17 GL9 is a 17-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 17rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip.
The PMAG 15 GL9 is a 15-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds. High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 15rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine. The PMAG 15 GL9 is compatible with Glock G19 handguns as well as sub-compact variants with some protrusion below the grip. Made in U.S.A.
• Proudly Designed and Made in USA with a Lifetime Warranty • Matte Black Anodized 6061-T6 Aluminum Construction • Compatible with Factory SIG P320 9/40 Magazine with Circular or Rectangular Spring Plate • Compatible with SIG X-series Magazine Funnel • 0.378" Extended Height and 0.9 oz. Weight Helps Facilitate Faster Reloads • IDPA & USPSA LegalMaterial: Aluminum Height: 0.498" Length : 1.450" Weight: 0.9 oz Color: Black Anodize
• Proudly Designed and Made in USA with a Lifetime Warranty • Matte Red Anodized 6061-T6 Aluminum Construction • Compatible with Factory SIG P320 9/40 Magazine with Circular or Rectangular Spring Plate • Compatible with SIG X-series Magazine Funnel • 0.378" Extended Height and 0.9 oz. Weight Helps Facilitate Faster Reloads • IDPA & USPSA LegalMaterial: Aluminum Height: 0.498" Length : 1.450" Weight: 0.9 oz Color: Red Anodize
• Proudly Designed and Made in USA with a Lifetime Warranty • Matte Bronze Anodized 6061-T6 Aluminum Construction • Compatible with Factory SIG P320 9/40 Magazine with Circular or Rectangular Spring Plate • Compatible with SIG X-series Magazine Funnel • 0.378" Extended Height and 0.9 oz. Weight Helps Facilitate Faster Reloads • IDPA & USPSA LegalMaterial: Aluminum Height: 0.498" Length : 1.450" Weight: 0.9 oz Color: Bronze Anodize
The PMAG 10 AK/AKM MOE is an inexpensive, lightweight, highly reliable 10-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others). It features a removable floorplate, constant curve geometry, and a high-reliability / low-friction follower for the affordable performance you expect from a MOE PMAG. This magazine counts as three US compliance parts for 922(r). Made in the USA.
The PMAG 20 AK/AKM MOE is an inexpensive, lightweight, highly reliable 20-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others). It features a removable floorplate, constant curve geometry, and an advanced low-friction follower for the affordable performance you expect from a MOE PMAG. Magazine counts as three US compliance parts for 922(r).Made in the USA.
Adding capacity and control with a minimal footprint, the PMAG 12 GL9 is a 12-round magazine for the Glock 26.Building on the proven PMAG 17 GL9 and PMAG 15 GL9, subcompact Glock users gain two more rounds of capacity while adding a built-in finger groove for a full grip. Featuring grasping grooves for easy retrieval and an easily removable floor plate with paint-pen marking matrix, the PMAG 12 GL9 brings duty capacity to subcompact convenience. Made in the USA.
The Magpul PMAG 10 GL9 - Glock 17 was designed for flawless reliability and durability over thousands of rounds. It provides the same quality and performance of the proven Magpul PMAG series of Glock magazines while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. It utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market Includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 10-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.The PMAG 10 GL9 - Glock 17 is compatible with all full-size 9mm Glock handguns and compact and sub-compact variants with some protrusion below the grip. Made in the USA.
The Magpul PMAG 10 GL9, 9x19 - GLOCK 19 was designed for flawless reliability and durability over thousands of rounds. It provides the same quality and performance of the proven Magpul PMAG series of Glock magazines, while also providing a viable product solution to those in locations and situations where a 10-round capacity restriction is required or desired. It utilizes the same double stack feed geometry as the standard capacity PMAG GL9 to ensure feeding and to avoid known reliability issues seen in many competitor products on the market. Includes a high visibility controlled-tilt follower, a stainless steel spring, an easily removable floorplate for cleaning, paint pen dot matrix for magazine marking, ridged floorplate edges for better grip, and 10-round indicator windows. The magazine drops free when loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.The PMAG 10 GL9 is compatible with all compact 9mm Glock handguns, as well as sub-compact variants with some protrusion below the grip.Made in the USA.
• Proudly Designed and Made in USA • Precision Machined from 6061-T6 Aluminum and Finished in a Matte Black Anodize • Compatible with Factory Glock Double Stack Small Frame Magazine • 0.347" Extended Height and 1 oz. Weight Helps Facilitate Faster Reloads with or without a Magwell • IDPA & USPSA LegalMaterial: Aluminum Height: 0.522" Length : 1.550" Weight: 1.0 oz Color: Black Anodize
• Proudly Designed and Made in USA • Precision Machined from 6061-T6 Aluminum and Finished in a Matte Blue Anodize • Compatible with Factory Glock Double Stack Small Frame Magazine • 0.347" Extended Height and 1 oz. Weight Helps Facilitate Faster Reloads with or without a Magwell • IDPA & USPSA LegalMaterial: Aluminum Height: 0.522" Length : 1.550" Weight: 1.0 oz Color: Blue Anodize
• Proudly Designed and Made in USA • Precision Machined from 6061-T6 Aluminum and Finished in a Matte Red Anodize • Compatible with Factory Glock Double Stack Small Frame Magazine • 0.347" Extended Height and 1 oz. Weight Helps Facilitate Faster Reloads with or without a Magwell • IDPA & USPSA LegalMaterial: Aluminum Height: 0.522" Length : 1.550" Weight: 1.0 oz Color: Red Anodize
• Proudly Designed and Made in USA • Precision Machined from 6061-T6 Aluminum and Finished in a Matte Bronze Anodize • Compatible with Factory Glock Double Stack Small Frame Magazine • 0.347" Extended Height and 1 oz. Weight Helps Facilitate Faster Reloads with or without a Magwell • IDPA & USPSA LegalMaterial: Aluminum Height: 0.522" Length : 1.550" Weight: 1.0 oz Color: Bronze Anodize
• Proudly Designed and Made in USA • Precision Machined from 6061-T6 Aluminum and Finished in a Matte Blue Anodize • Compatible with Factory Heckler & Koch VP9/P30 9/40 Magazine • 0.209" Extended Height and 1 oz. Weight Helps Facilitate Faster Reloads with or without a Magwell • IDPA & USPSA LegalMaterial: Aluminum Height: 0.507" Length : 1.450" Weight: 1.0 oz Color: Blue Anodize
MAGPUL PMAG M3 .223 30 Round Black
The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
The PMAG 30 AK74 MOE is an inexpensive, lightweight, and highly reliable 30-round polymer magazine designed for Kalashnikov-pattern rifles chambered in 5.45x39mm (AK74, MPi-AK-74N, PA md. 86, and others). It features a removable floorplate, constant curve geometry, and a low-friction follower for the affordable performance you expect from a MOE PMAG. This magazine counts as three US compliance parts for 922r. Made in the USA.
MAGPUL PMAG M3 .223 30 Round Medium Coyote Tan
The PMAG 10 GEN M3 is a 10-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Incorporating new material technology and manufacturing processes for enhanced strength, durability, and reliability, the PMAG 10 provides next-generation performance for those needing lower profile magazines. While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
MAGPUL PMAG M3 .223 20 Round Black
The next-generation PMAG 30 GEN M3 is a 20-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.
Stainless Steel Body: Our AR-15/M4/M16 Stainless Steel magazines are constructed with the highest levels of quality that guarantees durability and longevity! Our magazines are manufactured 100% start to finish in the USA using “.020” gauge 410 Stainless-Steel Alloy that is heat treated for superior strength, and lasting endurance. Their Stainless-Steel construction means they won’t swell in heat or crack in the cold, making a more reliable alternative to polymer magazines. This is done all while maintaining that undeniably good look. Available Coatings: Our durable, wear-in, not wear off, coating (Marlube) was developed directly from our aerospace roots. These Marlube coatings offer supreme performance, protection, and lubricity for your magazine. The more you use it, the better it performs. These Marlube coatings offer supreme performance and protection both to yourself and to your magazine. Your #1 choice for reliability, durability, and superiority! Assembly Components: - 410 Series Stainless Steel Body, Heat Treated - Chrome Silicon Springs - Enhanced Anti-tilt Polymer Followers with PTFE - 300 Series SS Floor plate with Black Oxide Coating for Corrosion ResistanceCannot ship to the following states: CA, CT, HI, MD, MA, NY, NJ,CO and Cook County, IL.
