Magpul Industries Products for Sale at Northern Rifleman

The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, The Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail.

Made in U.S.A.

The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, The Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail.

Made in U.S.A.

The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, The Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail.

Made in U.S.A.

The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, The Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Each set comes with four (4) two-piece panels which will cover ONE side of a carbine rail.

Made in U.S.A.

The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included.

Made in U.S.A.

The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included.

Made in U.S.A.

The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included.

Made in U.S.A.

The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included.

Made in U.S.A.

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 3 Slots, max overall length of 1.6 in.

Made in U.S.A.

Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 5 Slots, max overall length of 2.5 in

Made in U.S.A.

Clip-style sling attachment point for 1-1/4" webbing. Lockable, Melonite finished steel and reinforced polymer hardware. Compatible with ASAP Plate, RSA, MSA, SGA Receiver Sling Mount, and many other clip-in sling attachment points*. Combine with the MS1 Sling for a dedicated two-point sling, or with MS1 MS3 Adapter or MS1 MS3-QD Adapter for a two to one-point convertible sling.

Made in U.S.A.

XT Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved weapon control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail. One panel per package.

Made in U.S.A.

XT Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved weapon control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail. One panel per package.

Made in U.S.A.

XT Rail Panels offer low-profile 1913 Picatinny rail coverage. The semi-rubbery material offers improved weapon control and rail protection. Easily cut for custom lengths, sections can mount next to each other to form a visually continuous cover. Each panel fits one side of a carbine-length rail. One panel per package.

Made in U.S.A.

Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provide a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc.

Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provide a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc.

Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provide a rubbery surface for improved weapon control and rail protection. Easily cut for custom lengths, each panel fits one side of a carbine-length rail (18 slots). One panel per package. Manufactured by Falcon Industries, Inc.

The PMAG 30 AR/M4 GEN M2 MOE is a 30-round 5.56x45 NATO (.223 Remington) AR15/M4 compatible magazine that offers a cost competitive upgrade from the aluminum USGI.

It features an impact resistant polymer construction, easy to disassemble design with a flared floorplate for positive magazine extraction, resilient stainless steel spring for corrosion resistance, and an anti-tilt, self-lubricating follower for increased reliability.

Made in U.S.A.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non polymer). These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function.

Feature beveled contours to minimize potential snagging, utilizes our TSP texture for additional grip, and protrudes only slightly more than 1/8" from the mounting surface to maintain a low-profile. The center locking tab is pre-scored to allow the user to snap off sections and mix and match colors for a customized look.

Includes six panels, each covering one M-LOK slot.

Made in U.S.A.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non polymer). These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function.

Feature beveled contours to minimize potential snagging, utilizes our TSP texture for additional grip, and protrudes only slightly more than 1/8" from the mounting surface to maintain a low-profile. The center locking tab is pre-scored to allow the user to snap off sections and mix and match colors for a customized look.

Includes six panels, each covering one M-LOK slot.

Made in U.S.A.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non polymer). These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function.

Feature beveled contours to minimize potential snagging, utilizes our TSP texture for additional grip, and protrudes only slightly more than 1/8" from the mounting surface to maintain a low-profile. The center locking tab is pre-scored to allow the user to snap off sections and mix and match colors for a customized look.

Includes six panels, each covering one M-LOK slot.

Made in U.S.A.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non polymer). These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function.

Feature beveled contours to minimize potential snagging, utilizes our TSP texture for additional grip, and protrudes only slightly more than 1/8" from the mounting surface to maintain a low-profile. The center locking tab is pre-scored to allow the user to snap off sections and mix and match colors for a customized look.

Includes six panels, each covering one M-LOK slot.

Made in U.S.A.

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 7 Slots, max overall length of 3.3 in.

Made in U.S.A.

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 9 Slots, max overall length of 4.1 in.

Made in U.S.A.

Sling Mount Kit – TYPE 1 can be added to either side of the SGA®, MOE® Rifle, MOE® Fixed Carbine, MOE® AK, Zhukov-S, Hunter 700, and Hunter X-22 Stocks for use with push-button QD Sling Swivels or our own Magpul® QDM.

Heavy-duty black phosphatized steel construction easily installs with provided hardware. Swivels not included.

Made in U.S.A.

The PMAG 17 GL9 is a 17-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds.

High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 17rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.

The PMAG 17 GL9 is compatible with all full-size 9mm Glock handguns, as well as compact and sub-compact variants with some protrusion below the grip.

The PMAG 15 GL9 is a 15-round Glock 9mm handgun magazine featuring a new proprietary all-polymer construction for flawless reliability and durability over thousands of rounds.

High visibility controlled-tilt follower, stainless steel spring, easily removable floorplate for cleaning, paint pen dot matrix for mag marking, ridged floorplate edges for better grip, and 15rd indicator windows. Drops free loaded or unloaded. All with the same boring reliability you expect from an OEM magazine.

The PMAG 15 GL9 is compatible with Glock G19 handguns as well as sub-compact variants with some protrusion below the grip.

Made in U.S.A.

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. 11 Slots, max overall length of 4.9 in.

Made in U.S.A.

MAGPUL PMAG M3 .223 30 Round Black

The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Made in U.S.A.

MAGPUL PMAG M3 .223 30 Round Medium Coyote Tan

The next-generation PMAG 30 GEN M3 is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.

While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.

Made in U.S.A.