Home > Manufacturers
Choose a sub category:
Aero Precision ALG Defense Allen
Ammunition Storage Components - ASC Anderson Manufacturing APEX Tactical
AR 500 Azoom Ballistic Advantage
Bianchi Concealment Express FAB Defense
Fail Zero Federal Cartridge Frontier Cartridge
Galco Geiselle Hogue Grips
Hornady Leapers/UTG Luth AR
Lyman Magpul Industries Masterlock
MEC-GAR Northern Rifleman Remington Arms
Safariland Sellior & Belot Sig Sauer
Streamlight Tacfire Yankee Hill Machine Co
Winchester
Large assortment of quality manufacturers sold by Northern Rifleman
Sort By:
Page of 26
APAR501603A Aero Precision AR15 Upper Receiver Assembled

Forged from 7075 T6 aluminum, the assembled upper receiver is precision-machined to M16/M4 specification and features M4 feedramps. This unit comes assembled with both the port door and forward assist hardware.

MSRP $99.99
Our Price: $89.99
Savings: $10.00
APAR501801A Aero Precision AR15 Upper Receiver Assembled FDE

Forged from 7075 T6 aluminum, the assembled upper receiver is precision-machined to M16/M4 specification and features M4 feedramps. This unit comes assembled with both the port door and forward assist hardware.

MSRP $125.00
Our Price: $119.99
Savings: $5.01
APAR501302 Aero Precision Stripped AR15 Lower Receiver FDE, Gen 2

Aero Precision's Gen 2 Stripped AR-15 Lower Receiver in Flat Dark Earth (FDE) is the perfect base for your custom rifle build. Machined to mil-spec dimensions, these lowers work with standard AR15 components and ensure the highest quality with a correct component interface.

Machined from 7075-T6 forged aluminum.

Marked "Cal Multi".

MSRP $110.00
Our Price: $109.99
Savings: $0.01
APAR501101 Aero Precision Stripped AR15 Lower Receiver, Gen 2

Aero Precision's Gen 2 Stripped AR-15 Lower Receiver is the perfect base for your custom rifle build. Machined to mil-spec dimensions, these lowers work with standard AR15 components and ensure the highest quality with a correct component interface.

Machined from 7075-T6 forged aluminum.

Marked "Cal Multi".


MSRP $90.00
Our Price: $89.99
Savings: $0.01
ACT ALG Defense ACT Trigger

ALG Defense - Advanced Combat Trigger (ACT)

Description: The ALG Defense Advanced Combat Trigger (ACT) is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the ACT is very similar to a standard mil-spec trigger, however it is sharper and the grittiness of the stock trigger pull has been removed while the traditional reliability of a stock trigger remains. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs.

MSRP $70.00
Our Price: $70.00
ALGQMS ALG Quality Mil-Spec Trigger

The ALG Defense Quality Mil-Spec (QMS) Trigger is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the QMS is very similar to a standard mil-spec trigger, however the majority of the associated grittiness of the stock trigger pull has been removed while the well known reliability of a stock trigger remains.

The pull weight is not lower than the M4/M16 minimum weight specification of 5.5lbs.

MSRP $50.00
Our Price: $50.00
8911 Allen Buckley Tactical Sling 1 or 2 Point

The Buckley Tactical Sling is a convertible, single to two point attachment sling with quick snap hook attachment and elastic covered hooks.  Heavy weight web construction with hardware tested to a 200 pound load.  Adjusts to 50″.

MSRP $16.24
Our Price: $16.24
ALN10652 Allen Combat Tactical Rifle Case 42" Black

The Combat Tactical Rifle Case from Allen Tactical fits tactical rifles with or without scopes.  Features four magazine pockets with hook and loop closures, plus a large zippered accessory pocket that fits targets, gloves, ammo, and other accessories.  A large 5.25 x 4.25 hook and loop patch is perfect for adding morale and name patches.  The exterior of the case is constructed from heavy-duty Endura fabric, and the inside of the case has a soft knit lining and thick foam padding to protect your firearm.  Includes durable web handles with a padded handle grip.  Lockable.

MSRP $38.20
Our Price: $27.99
Savings: $10.21
10632 Allen Combat Tactical Rifle Case Fits Rifles, Black, 32"

The Combat Tactical Rifle Case from Allen Tactical fits tactical rifles with or without scopes.  Features four magazine pockets with hook and loop closures, plus a large zippered accessory pocket that fits targets, gloves, ammo, and other accessories.  A large 5.25 x 4.25 hook and loop patch is perfect for adding morale and name patches.  The exterior of the case is constructed from heavy-duty Endura fabric, and the inside of the case has a soft knit lining and thick foam padding to protect your firearm.  Includes durable web handles with a padded handle grip.  Lockable.

MSRP $26.25
Our Price: $25.99
Savings: $0.26
10642 Allen Combat Tactical Rifle Case Fits Rifles, Black, 37"

The Combat Tactical Rifle Case from Allen Tactical fits tactical rifles with or without scopes.  Features four magazine pockets with hook and loop closures, plus a large zippered accessory pocket that fits targets, gloves, ammo, and other accessories.  A large 5.25 x 4.25 hook and loop patch is perfect for adding morale and name patches.  The exterior of the case is constructed from heavy-duty Endura fabric, and the inside of the case has a soft knit lining and thick foam padding to protect your firearm.  Includes durable web handles with a padded handle grip.  Lockable.

MSRP $26.25
Our Price: $25.99
Savings: $0.26
1080 Allen Engage Tactical Rifle Case 38" Black

Allen’s Engage Tactical Rifle Case features thick foam padding, rugged Endura fabric construction, and an easy clean polyester lining. The case also has three magazine pockets, durable web handles, and a D-ring for locking your zippers.

MSRP $20.58
Our Price: $19.99
Savings: $0.59
1070 Allen Engage Tactical Rifle Case Black

Allen’s Engage Tactical Rifle Case features thick foam padding, rugged Endura fabric construction, and an easy clean polyester lining. The case also has three magazine pockets, durable web handles, and a D-ring for locking your zippers.

MSRP $20.58
Our Price: $19.99
Savings: $0.59
8910 Allen Solo Single Point Sling Black

The Solo Single Point Sling is an adjustable, heavy-duty 1.5″ web construction shoulder strap with metal scissor type attachment hook. The sling also features a shock absorbing bungee covered in heavy-duty web material. The sling is designed to clip to the receiver or upper stock of a tactical rifle. Adjusts from 42″ to 54″.

MSRP $9.87
Our Price: $9.87
1062 Allen Victory Tactical Rifle Case, 42", Stars & Stripes

The Victory Tactical Rifle Case is Made in the USA and fits guns up to 42 inches. Features a stars and stripes pattern to show your support for the 2nd Amendment, thick foam padding, multiple external pockets for magazines and gear, and a padded hook and loop carry handle. The exterior is made from rugged Endura fabric, and the interior is a soft knit lining. Lockable.

MSRP $29.89
Our Price: $28.99
Savings: $0.90
ALN10904 Allen Wedge Tactical Rifle Case

The Wedge Tactical Case Victory fits guns up to 41″ and is Made in the USA. With a stars and stripes pattern, this case will show your support for the 2nd Amendment. This case is made from a rugged Endura fabric exterior and has a soft knit lining. Features thick foam padding, multiple external pockets for magazines and gear. Lockable.

MSRP $38.05
Our Price: $27.99
Savings: $10.06
APX112-027 Apex Sig Sauer P320 Advanced Curved Trigger

The Apex Curved Advanced Trigger for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory curved trigger and reduces the trigger pull weight by approximately 35%. The trigger is easily installed without the need for tools or fixtures. Machined from billet steel.

– Direct drop-in replacement of factory curved trigger
– Reduces trigger pull weight by approximately 35%
– In X-Series models, reduces pull weight by approximately 10% and overall travel 15%
– No tools required for installation
– Maintains factory drop safety values

MSRP $49.95
Our Price: $47.45
Savings: $2.50
APX112-026 Apex Sig Sauer P320 Advanced Flat Trigger

The Apex Flat Advanced Trigger for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory curved trigger and reduces the trigger pull weight by approximately 35%. The flat design increases trigger reach to the natural resting position of the shooter’s finger and allows the shooter to position their finger lower on the trigger face to take advantage of the increased leverage. The trigger is easily installed without the need for tools or fixtures. Machined from billet steel.

– Direct drop-in replacement of factory curved trigger
– Reduces trigger pull weight by approximately 35%
– In X-Series models, reduces pull weight by approximately 10% and overall travel 15%
– No tools required for installation
– Maintains factory drop safety values

MSRP $49.95
Our Price: $47.45
Savings: $2.50
APX112-032 Apex Sig Sauer P320 Curved Advanced Trigger/Bar

The Apex Curved Forward Set Trigger Kit for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory trigger bar and curved trigger and is easily installed without the need for tools or fixtures. The patent pending Apex Forward Set Trigger Bar reduces trigger travel and reset while the Apex Curved Advanced Trigger reduces the trigger pull weight while approximately replicating the curved feel of the factory trigger. Machined from billet steel.

– Direct drop-in replacement of factory trigger bar and curved trigger
– Reduces trigger travel approx. 30%
– Reduces reset approx. 20%
– Reduces trigger pull weight by approx. 30%
– In X-Series models, does not reduce pull weight but does reduce overall travel 30%
– Maintains factory drop safety values

MSRP $124.95
Our Price: $118.70
Savings: $6.25
APX112-025 Apex Sig Sauer P320 Enhancement Trigger

The Apex Flat-Faced Action Enhancement Trigger for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory curved trigger and is easily installed without the need for tools or fixtures. The flat design increases trigger reach to the natural resting position of the shooter’s finger and allows the shooter to position their finger lower on the trigger face to take advantage of the increased leverage. Machined from billet steel.

– Direct drop-in replacement of factory curved trigger
– No tools required for installation
– Reduces trigger pull weigh by approx. 18% (8.0 lbs to 6.5 lbs, as tested)
– In X-Series models, due to leverage, pull weight will increase approx. 6%, while overall travel reduces 10%
– Maintains factory drop safety values

MSRP $44.95
Our Price: $42.70
Savings: $2.25
APX112-030 Apex Sig Sauer P320 Enhancement Trigger/Bar

The Apex Flat-Faced Action Enhancement Trigger Kit for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory trigger bar and curved trigger and is easily installed without the need for tools or fixtures. The patent pending Apex Forward Set Trigger Bar reduces trigger travel and reset while the Apex Flat-Faced Action Enhancement Trigger increases trigger reach to the natural resting position of the shooter’s finger and allows the shooter to position their finger lower on the trigger face to take advantage of the increased leverage. Machined from billet steel.

– Direct drop-in replacement of factory trigger bar and curved trigger
– Reduces trigger travel approx. 40%
– Reduces reset approx. 20%
– Reduces trigger pull weight by approx. 20%
– In X-Series models, due to leverage, pull weight will increase approx. 6%, while overall travel reduces 30%
– Maintains factory drop safety values

MSRP $119.95
Our Price: $113.95
Savings: $6.00
APX112-041 Apex Sig Sauer P320 Forward Set Trigger Bar KIT

The Apex Forward Set Trigger Bar for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory trigger bar and is easily installed without the need for tools or fixtures. The patent pending Apex Forward Set Trigger Bar reduces trigger travel and reset and can be paired with the factory curved trigger or one of the three Apex triggers for the P320 (112-025, 112-026 or 112-027). Machined from billet steel.

– Direct drop-in replacement of factory trigger bar
– Reduces trigger travel approx. 20%
– Reduces reset
– Reduces trigger pull weight by approx. 10%
– In X-Series models, does not reduce pull weight but does reduce overall travel 20%
– Can be paired with the factory trigger, or an Apex trigger (112-025, 112-026 or 112-027)
– Maintains factory drop safety values

MSRP $79.95
Our Price: $75.97
Savings: $3.98
APRH100029 AR15 Aero Precision Lower Parts Kit

Aero Precision's lower parts kit helps you to build a custom AR15 from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.
Includes: Takedown/pivot Spring, Takedown/pivot detent, Trigger/hammer pin, Takedown pin, Pivot pin, Bolt Catch, Bolt Catch Spring, Bolt Catch buffer, Bolt catch roll pin, Safety Selector, Safety Selector spring, Safety Selector detent, Buffer retainer, Buffer retainer spring, Trigger guard, Trigger guard roll pin, A2 pistol grip, Pistol grip screw, Pistol grip lock washer, Trigger spring, Hammer spring, Disconnector spring, Magazine catch body, Magazine catch spring, Magazine catch button, Hammer, Trigger, Disconnector

MSRP $59.99
Our Price: $59.99
223-10RD-SS AR15 Magazine Stainless Steel - 10rd .223/5.56

AR15 Magazine Stainless Steel - 10rd .223/5.56

Description: .223/5.56, 30 round Stainless Steel, black finish, anti-tilt follower.


MSRP $15.95
Our Price: $14.99
Savings: $0.96
223-20RD-SS AR15 Magazine Stainless Steel - 20rd .223/5.56

AR15 Magazine Stainless Steel - 20rd .223/5.56

Description: .223/5.56, 20 round Stainless Steel, black finish, anti-tilt follower.


MSRP $15.95
Our Price: $14.99
Savings: $0.96
223-30RD-SS AR15 Magazine Stainless Steel - 30rd .223/5.56

AR15 Magazine Stainless Steel - 30rd .223/5.56

Description: .223/5.56, 30 round Stainless Steel, black finish, anti-tilt follower.


MSRP $15.95
Our Price: $14.99
Savings: $0.96
6.8-10RD-SS AR15 Magazine Stainless Steel 6.8 SPC 10 Round

AR15 Magazine Stainless Steel 6.8 SPC 10 Round

Description: 6.8 SPC Stainless Steel Magazine, Black Finish. *** Will only accept 10 round capacity ***


MSRP $17.95
Our Price: $15.99
Savings: $1.96
6.8-25RD-SS AR15 Magazine Stainless Steel 6.8 SPC 25 Round

AR15 Magazine Stainless Steel 6.8 SPC 25 Round

Description: 6.8 SPC Stainless Steel Magazine, Black Finish. 25 round capacity.

MSRP $17.95
Our Price: $15.99
Savings: $1.96
7.62X9-10RD-SS AR15 Magazine Stainless Steel 7.62X39 10 Round

AR15 Magazine Stainless Steel 7.62X39 10 Round

Description: 7.62 X 39 Stainless Steel Magazine, Black Finish. *** Will only accept 10 round capacity ***


MSRP $17.95
Our Price: $15.99
Savings: $1.96
7.62x39RD-SS AR15 Magazine Stainless Steel 7.62X39 30 Round

AR15 Magazine Stainless Steel 7.62X39 30 Round

Description: 7.62 X 39 Stainless Steel Magazine, 30 round capacity, Black Finish.


MSRP $22.00
Our Price: $21.99
Savings: $0.01
Concealment Plate Carrier Black AR500 Armor Concealment Plate Carrier - Black

Concealment Plate Carrier Specs:
Construction: 1000D Nylon
Weight: 1lb 5oz (unloaded)
Size: Fully adjustable shoulder straps and girth, Medium – XXL Armor Compatibility: Standard 10” x 12” and 11” x 14” Body Armor in both soft and hard variants

AR500 Armor® Concealment Plate Carrier Features:
Includes Concealment Plate Carrier and Removable Side Plate Pouches
Ideal for use with AR500 Armor® Curved Level III ASC Body Armor Plates
Light Weight and Low Profile
“Slick Side” design prevents printing when concealed
Accepts up to 6” x 6” or 6” x 8” side plate body armor
Fully Adjustable from Medium to XXL
Slim profile adjustable shoulder straps
Lifetime Warranty
1000D Nylon Construction
Made 100% in the USA

MSRP $149.00
Our Price: $149.00