Submit search
• Robust Steel Construction • Solid Integral Base with 6 Picatinny Slots on Top • Half Cut in Mid Section for Shell Rejection • Locking Screws Included • Fits Remington Model 700 Short Action RifleMaterial: Steel Weight: 4.3 oz Pieces: 1 Rail Type: Picatinny/Weaver No. of Rails: 1 Length: 5.47 inch
• Solid High Quality Integral Steel Base with Matte black Finish • Precision Made to Fit Model 700 Long Action Rifles • 6 Picatinny Slots on Top for Convenient Scope Mounting • Half Cut in Mid Section for Shell Rejection • Locking Screws IncludedMaterial: Steel Weight: 4.6 oz Pieces: 1 Rail Type: Picatinny/Weaver No. of Rails: 1 Length: 6.3 inch
The Magpul® M-LOK® Dovetail Adapter - 2 Slot for RRS®/ARCA® Interface is a lightweight, machined, Mil-Spec hard anodized aluminum mounting plate that is designed for M-LOK slot compatible hand guards and is fully compatible with most accessories—bipods, tripods, etc.—that use the RRS Dovetail Standard. The 2 Slot M-LOK Dovetail Adapter features multiple drilled and tapped holes that are optimally located to limit overall travel of accessories. It has comfortable, yet functional, snag-resistant beveled edges. Its optimally-placed recoil / impact mitigation lugs ensure the M-LOK Dovetail Adapter remains securely in place throughout the most rugged use and heaviest recoil impulses, making the M-LOK Dovetail Adapter a rugged, repeatable and precise mounting solution. Made in the U.S.A. RUGGED, FUNCTIONAL DESIGN Precision machined aluminum construction Corrosion-resistant Mil-Spec hard anodized finish Multiple drilled and tapped locations for hardware installation which limit over-travel of accessories while also serving as reference points Functional snag resistant beveled edges
The Magpul® M-LOK® Dovetail Adapter - 4 Slot for RRS®/ARCA® Interface is a lightweight, machined, Mil-Spec hard anodized aluminum mounting plate that is designed for M-LOK slot compatible hand guards and is fully compatible with most accessories—bipods, tripods, etc.—that use the RRS Dovetail Standard. The 4 Slot M-LOK Dovetail Adapter features multiple drilled and tapped holes that are optimally located to limit overall travel of accessories. It has comfortable, yet functional, snag-resistant beveled edges. It also includes a hardware access feature to allow removal of the front action screw on a rifle mounted on a Magpul Pro 700 chassis without the need for removal of the Dovetail Adapter from the chassis. Optimally-placed recoil / impact mitigation lugs ensure the M-LOK Dovetail Adapter remains securely in place throughout the most rugged use and heaviest recoil impulses, making the M-LOK Dovetail Adapter a rugged, repeatable and precise mounting solution. Made in the USA. RUGGED, FUNCTIONAL DESIGN Precision machined aluminum construction Corrosion-resistant Mil-Spec hard anodized finish Multiple drilled and tapped locations for hardware installation which limit over-travel of accessories while also serving as reference points Functional snag resistant beveled edges
The Magpul® M-LOK® Dovetail Adapter – Pro Chassis Full Rail for RRS®/ARCA® Interface is a lightweight, machined, Mil-Spec hard anodized aluminum mounting plate that is designed for the Magpul Pro 700 rifle chassis and is fully compatible with most accessories--bipods, tripods, etc.--that use the RRS Dovetail Standard. The M-LOK Dovetail Adapter features multiple drilled and tapped holes that are optimally located to limit overall travel of accessories. It has comfortable, yet functional, snag-resistant beveled edges and it has a feature that allows access to the front action screw without requiring removal of the Dovetail Adapter from the chassis. Optimally-placed recoil/impact mitigation lugs ensure the M-LOK Dovetail Adapter remains securely in place throughout the most rugged use and heaviest recoil impulses, making the M-LOK Dovetail Adapter a rugged, repeatable and precise mounting solution. Made in the USA. RUGGED, FUNCTIONAL DESIGN Precision machined aluminum construction Corrosion-resistant Mil-Spec hard anodized finish Multiple drilled and tapped locations for hardware installation which limit over-travel of accessories while also serving as reference points Functional snag resistant beveled edges
Made from reinforced polymer and an anodized aluminum bedding block, the Hunter 700 Stock – Remington 700 Short Action offers users a cost-effective upgrade that features fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Short Actions, this stock requires no bedding and is a true "drop-in" solution.* This stock is also M-LOK® compatible to accept a broad range of accessories. Also available is our Magpul Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting. Made in the USA. STRONG BEDDING BLOCK Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block DIMPLED DRILL POINTS AND OTHER SLING OPTIONS Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8" long dome stud) Push-button QD swivel compatibility in rear with optional Sling Mount Kits Left and Right rear 1-1/4" Footman's Loops ENHANCED ERGONOMICS Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads 60 degree grip angle from bore axis Tapered Beam design provides good rigidity through forend and will free-float compatible barrels SPACER SYSTEM FOR CUSTOM LENGTH OF PULL Adjustable LOP from 13.0"-15.0" with included 0.50" spacers M-LOK SLOTS FOR ADDITIONAL ACCESSORIES M-LOK slots on forend sides and bottom for a wide variety of accessory and sling mounting options OPTIONAL CHEEK RISERS FOR COMB HEIGHT ADJUSTMENT Optional 0.00", 0.50", and 0.75" Cheek Risers available to adjust cheek weld (stock comes pre-fitted with 0.25" Riser) AICS-SPEC PMAG 5 7.62 AC Easily upgradeable to removable AICS-spec magazines (5.56x45 or 7.62x51 pattern) with the affordable Magpul Bolt Action Magazine Well
Made from reinforced polymer and an anodized aluminum bedding block, the Hunter 700L Stock – Remington 700 Long Action offers users a cost effective upgrade featuring fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true “drop-in” solution*. The 700L is also M-LOK® compatible to accept a broad range of accessories. Also compatible with our Magpul Bolt Action Magazine Well 700L, which allows the rifle to be used with detachable AICS-spec box magazines without the need for custom inletting. Made in the USA. STRONG BEDDING BLOCK Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block DIMPLED DRILL POINTS AND OTHER SLING OPTIONS Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8" long dome stud) Push-button QD swivel compatibility in rear with optional Sling Mount Kits Left and Right rear 1-1/4" Footman's Loops ENHANCED ERGONOMICS Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads 60 degree grip angle from bore axis Tapered Beam design provides good rigidity through forend and will free-float compatible barrels SPACER SYSTEM FOR CUSTOM LENGTH OF PULL Adjustable LOP from 13.0"-15.0" with included 0.50" spacers M-LOK SLOTS FOR ADDITIONAL ACCESSORIES M-LOK slots on forend sides and bottom for a wide variety of accessory and sling mounting options OPTIONAL CHEEK RISERS FOR COMB HEIGHT ADJUSTMENT Optional 0.00", 0.50", and 0.75" Cheek Risers available to adjust cheek weld (stock comes pre-fitted with 0.25" Riser) AICS-SPEC PMAG 5 AC™ L, Standard - AICS Long Easily upgradeable to removable AICS-spec long action magazines (.30-06 or .300WM pattern) with the affordable Magpul Bolt Action Magazine Well 700L
The Magpul Pro 700L - Fixed Stock is an uncompromising, full featured precision rifle chassis for long action Remington 700 and Remington 700-footprint rifles. The Pro 700L combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance. Based on a fully machined aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700L is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt-cutout plate, it includes a reversible cheek riser and a reversible hinge on the folding version. This fixed-stock version of the Pro 700L is easily upgraded to the folding-stock version with the purchase and installation of the Magpul Pro FHA - Folding Hinge Adapter (MAG999). Made in the USA. STRONG FOUNDATION Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers Durable steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5" push button swivels AMBIDEXTROUS USE Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt cut out plate for left or right hand actions using a 1/8" hex wrench Ambidextrous thumb shelf for firing hand thumb placement ADJUSTABLE TO YOUR NEEDS Overall LOP adjustment range is 13.25" - 15.125" Comb height adjustment has a 1" range with a secondary locking knob to eliminate movement in the cheek riser Butt pad height can be adjusted up 1.33" and down .90" and is adjustable left or right 5 degrees Cheek riser features a 3-position fore/aft adjustment of +.375", 0" and -.375" which can also be changed for left or right side usage INTEGRATED AICS PATTERN MAGAZINE WELL Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG® 5 AC™ L, Standard and PMAG® 5 AC™ L, Magnum - AICS Long Action magazines as well as most other AICS pattern long action magazines Low-profile, anti-snag ambidextrous magazine release is made of melonite treated steel M-LOK M-LOK slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2) INTERCHANGEABLE GRIPS Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep, with a .75" fore / aft trigger reach adjustment Additional grip option included with a more aggressive forward sweep (8 degree forward / 20 degree aft edge sweep) HARDWARE Two ¼-28x1/2” Socket Head Cap Screws are included for use as action screws TRIGGER GUARD A large trigger guard allows for use with gloves and accepts most factory and aftermarket curved or flat triggers NIGHT VISION COMPATIBLE Optional inline mount for clip-on night vision and thermal imaging devices
The Magpul Pro 700L Rifle Chassis is an uncompromising, full featured precision rifle chassis for long action Remington 700 and Remington 700-footprint rifles. The Pro 700L combines innovative engineering, precision machining, Mil-Spec quality finishes, and an extensive list of purposeful design features with complete adjustability to provide demanding end users with the most comprehensive available precision rifle platform solution for true out of the box performance. Based on a fully machined aluminum skeleton and clad in Magpul polymer for environmental comfort, noise mitigation, and ergonomics, the Pro 700L is also fully ambidextrous. Capable of fitting both right and left-handed actions with the simple swap of a bolt-cutout plate, and includes a reversible cheek riser and a reversible hinge on the folding version. Made in the USA. BUILT STRONG Type III hard anodized machined 6061-T6 billet aluminum V-bedding block, body, adjustment knobs and forend with high strength injection molded polymer body covers Durable steel rotation limited QD sling swivel mounts with Melonite® finish fits up to 1.5" push button swivels AMBIDEXTROUS USE Ambidextrous bedding block can be changed by swapping the QD sling swivel plate and bolt cut out plate for left or right hand actions using a 1/8” hex wrench. Ambidextrous thumb shelf for firing hand thumb placement The stock's push-button hinge is reversible for left or right folding capability with the use of a 5/32” hex wrench. A fixed stock adapter is also available for a non-folding stock solution FOLDING STOCK Folding stock with push-button activated durable steel hinge with melonite finish. Folding stock is also designed to avoid interference with the bolt handle when folded and is compatible with a large variety of aftermarket bolt knobs and handles ADJUSTS TO YOUR NEEDS Overall LOP adjustment range is 13.25” – 15.125” Comb height adjustment has a 1” range with a secondary locking knob to eliminate movement in the cheek riser Butt pad height can be adjusted up 1.33” and down .90” and is adjustable left or right 5 degrees Cheek riser features a 3-position fore/aft adjustment of +.375”, 0” and -.375” which can also be changed for left or right side usage INTEGRATED AICS PATTERN MAGAZINE WELL Integrated AICS pattern magazine well of reinforced polymer construction optimized for PMAG® 5 AC™ L, Standard and PMAG® 5 AC™ L, Magnum - AICS Long Action magazines as well as most other AICS pattern long action magazines M-LOK M-LOK slots for accessory mounting on the forend (left-6/right-6/bottom-7) and the stock (bottom-2) INTERCHANGEABLE GRIPS Injection molded polymer grip with 5 degree forward edge sweep and enlarged palm swell with 7 degree aft edge sweep, with a .75” fore/aft trigger reach adjustment Additional grip option included with a more aggressive forward sweep (8 degree forward / 20 degree aft edge sweep)
