Large Selection of Ruger Rifle Parts

• Designed to Fit Ruger 10/22 Rifle
• Free Float Rail Does not Touch Barrel or Forend
• Clever Ventilation Holes for Weight Reduction and Attractive Tactical Appearance
• Precision Machined Special Slot to Accommodate Rear Iron Sight
• Easily Bolts on to Upper Receiver

Material: Aluminum
Weight: 4 oz
Pieces: 1
Rail Type: Picatinny/Weaver
No. of Rails: 1
Length: 11.7 inch
Width: 1.16 inch
Height: 0.9 inch

The X-22 Backpacker Forend is intended for use with additional barrels for rifles currently equipped with the X-22 Backpacker Stock, MAG808. Its minimalist design offers a convenient package without compromising shooting performance. It is compatible with factory and aftermarket barrels up to 0.92" outer diameter. Constructed of a durable advanced polymer, the X-22 Backpacker Forend features a unique locking interface to attach the barrel assembly to the stock body when being transported.

Made in the USA.

RUGGED CONSTRUCTION

Reinforced polymer construction for strength and durability

Ergonomic hand guard

BARREL OPTIONS

Unique locking interface to attach the barrel assembly to the stock body when being transported

Compatible with factory and aftermarket barrels, up to 0.92" OD

The X-22 Backpacker Forend is intended for use with additional barrels for rifles currently equipped with the X-22 Backpacker Stock, MAG808. Its minimalist design offers a convenient package without compromising shooting performance. It is compatible with factory and aftermarket barrels up to 0.92" outer diameter. Constructed of a durable advanced polymer, the X-22 Backpacker Forend features a unique locking interface to attach the barrel assembly to the stock body when being transported.

Made in the USA.

RUGGED CONSTRUCTION

Reinforced polymer construction for strength and durability

Ergonomic hand guard

BARREL OPTIONS

Unique locking interface to attach the barrel assembly to the stock body when being transported

Compatible with factory and aftermarket barrels, up to 0.92" OD

The X-22 Backpacker Forend is intended for use with additional barrels for rifles currently equipped with the X-22 Backpacker Stock, MAG808. Its minimalist design offers a convenient package without compromising shooting performance. It is compatible with factory and aftermarket barrels up to 0.92" outer diameter. Constructed of a durable advanced polymer, the X-22 Backpacker Forend features a unique locking interface to attach the barrel assembly to the stock body when being transported.

Made in the USA.

RUGGED CONSTRUCTION

Reinforced polymer construction for strength and durability

Ergonomic hand guard

BARREL OPTIONS

Unique locking interface to attach the barrel assembly to the stock body when being transported

Compatible with factory and aftermarket barrels, up to 0.92" OD

The X-22 Backpacker Forend is intended for use with additional barrels for rifles currently equipped with the X-22 Backpacker Stock, MAG808. Its minimalist design offers a convenient package without compromising shooting performance. It is compatible with factory and aftermarket barrels up to 0.92" outer diameter. Constructed of a durable advanced polymer, the X-22 Backpacker Forend features a unique locking interface to attach the barrel assembly to the stock body when being transported.

Made in the USA.

RUGGED CONSTRUCTION

Reinforced polymer construction for strength and durability

Ergonomic hand guard

BARREL OPTIONS

Unique locking interface to attach the barrel assembly to the stock body when being transported

Compatible with factory and aftermarket barrels, up to 0.92" OD

The Hunter X-22 Takedown Forend is intended for use with additional barrels on rifles currently equipped with the Hunter X-22 Takedown Stock. Made from high quality reinforced polymer, the X-22 Takedown Forend features a reversible barrel tray, ensuring proper fit for factory pencil profiles as well as heavy bull barrels with up to 0.920" outer diameter. It features multiple M-LOK® slots for accessory attachment and an adjustable barrel-tensioning shim in the forend for setting barrel preload (the barrel may also be free-floated). It also includes a dimpled drill point at the bottom of the forend for installation of sling swivel studs for bipod or sling swivel use.

Made in the USA.

RUGGED CONSTRUCTION

Reinforced polymer construction for strength and durability

M-LOK® slots on forend sides and bottom for a variety of accessory and sling mounting options

Dimpled drill point to install optional sling swivel studs such as the Sling Swivel Stud, MAG819

The Magpul PC Backpacker Stock for the Ruger® PC Carbine™ is the ultimate option for those wanting to bring advanced ergonomics and portability to their Ruger® PC Carbine™ rifle. With a similar look and functionality as our X-22 Backpacker stock, it offers a minimalist solution for the hunter or outdoorsman and was designed for those who want to transport their carbine in an efficient, convenient package without compromising shooting performance or ease of deployment.

The PC Backpacker is constructed with Magpul’s advanced polymer, featuring an ergonomic hand guard with M-LOK® slots at the 3 & 9 o’clock positions and interchangeable cheek risers to accommodate for various sighting options. The PC Backpacker stock also features an MOE SL® rubber butt-pad offering an anti-slip surface that increases impact protection and is compatible with the MOE SL® Enhanced Rubber Butt-Pad for an additional 3/8” LOP.

Using a unique locking interface that attaches the barrel assembly to the receiver, the PC Backpacker provides an efficient solution for storage during transportation while maintaining convenient assembly from the stowed position. By including multiple QD cup mounting locations, we’ve made it easy to carry your Ruger® PC Carbine™ in either the broken down or assembled state with the Magpul Sling Mount Kit–Type 1 & Type 2.

We’ve also integrated two convenient storage locations. The first is a water-resistant grip storage compartment that provides an at-hand location for a small multi-tool, survival equipment, or cleaning equipment. The second is a compartment in the riser section that’s ideal for a single pistol magazine, fitting up to the PMAG® 21 GL9®.

Made in the USA.

BACKPACKER FLEXIBILITY

Unique locking interface to attach the barrel assembly to the stock body when being transported Optional QD sling mounting capability Water-resistant grip storage compartment and a second compartment in the riser section RUGGED POLYMER CONSTRUCTION Ergonomic M-LOK-compatible hand guard Interchangeable standard and optic-height cheek risers included

The Magpul PC Backpacker Stock for the Ruger® PC Carbine™ is the ultimate option for those wanting to bring advanced ergonomics and portability to their Ruger® PC Carbine™ rifle. With a similar look and functionality as our X-22 Backpacker stock, it offers a minimalist solution for the hunter or outdoorsman and was designed for those who want to transport their carbine in an efficient, convenient package without compromising shooting performance or ease of deployment.

The PC Backpacker is constructed with Magpul’s advanced polymer, featuring an ergonomic hand guard with M-LOK® slots at the 3 & 9 o’clock positions and interchangeable cheek risers to accommodate for various sighting options. The PC Backpacker stock also features an MOE SL® rubber butt-pad offering an anti-slip surface that increases impact protection and is compatible with the MOE SL® Enhanced Rubber Butt-Pad for an additional 3/8” LOP.

Using a unique locking interface that attaches the barrel assembly to the receiver, the PC Backpacker provides an efficient solution for storage during transportation while maintaining convenient assembly from the stowed position. By including multiple QD cup mounting locations, we’ve made it easy to carry your Ruger® PC Carbine™ in either the broken down or assembled state with the Magpul Sling Mount Kit–Type 1 & Type 2.

We’ve also integrated two convenient storage locations. The first is a water-resistant grip storage compartment that provides an at-hand location for a small multi-tool, survival equipment, or cleaning equipment. The second is a compartment in the riser section that’s ideal for a single pistol magazine, fitting up to the PMAG® 21 GL9®.

Made in the USA.

BACKPACKER FLEXIBILITY

Unique locking interface to attach the barrel assembly to the stock body when being transported Optional QD sling mounting capability Water-resistant grip storage compartment and a second compartment in the riser section RUGGED POLYMER CONSTRUCTION Ergonomic M-LOK-compatible hand guard Interchangeable standard and optic-height cheek risers included

The Magpul PC Backpacker Stock for the Ruger® PC Carbine™ is the ultimate option for those wanting to bring advanced ergonomics and portability to their Ruger® PC Carbine™ rifle. With a similar look and functionality as our X-22 Backpacker stock, it offers a minimalist solution for the hunter or outdoorsman and was designed for those who want to transport their carbine in an efficient, convenient package without compromising shooting performance or ease of deployment.

The PC Backpacker is constructed with Magpul’s advanced polymer, featuring an ergonomic hand guard with M-LOK® slots at the 3 & 9 o’clock positions and interchangeable cheek risers to accommodate for various sighting options. The PC Backpacker stock also features an MOE SL® rubber butt-pad offering an anti-slip surface that increases impact protection and is compatible with the MOE SL® Enhanced Rubber Butt-Pad for an additional 3/8” LOP.

Using a unique locking interface that attaches the barrel assembly to the receiver, the PC Backpacker provides an efficient solution for storage during transportation while maintaining convenient assembly from the stowed position. By including multiple QD cup mounting locations, we’ve made it easy to carry your Ruger® PC Carbine™ in either the broken down or assembled state with the Magpul Sling Mount Kit–Type 1 & Type 2.

We’ve also integrated two convenient storage locations. The first is a water-resistant grip storage compartment that provides an at-hand location for a small multi-tool, survival equipment, or cleaning equipment. The second is a compartment in the riser section that’s ideal for a single pistol magazine, fitting up to the PMAG® 21 GL9®.

Made in the USA.

BACKPACKER FLEXIBILITY

Unique locking interface to attach the barrel assembly to the stock body when being transported Optional QD sling mounting capability Water-resistant grip storage compartment and a second compartment in the riser section RUGGED POLYMER CONSTRUCTION Ergonomic M-LOK-compatible hand guard Interchangeable standard and optic-height cheek risers included

The Magpul PC Backpacker Stock for the Ruger® PC Carbine™ is the ultimate option for those wanting to bring advanced ergonomics and portability to their Ruger® PC Carbine™ rifle. With a similar look and functionality as our X-22 Backpacker stock, it offers a minimalist solution for the hunter or outdoorsman and was designed for those who want to transport their carbine in an efficient, convenient package without compromising shooting performance or ease of deployment.

The PC Backpacker is constructed with Magpul’s advanced polymer, featuring an ergonomic hand guard with M-LOK® slots at the 3 & 9 o’clock positions and interchangeable cheek risers to accommodate for various sighting options. The PC Backpacker stock also features an MOE SL® rubber butt-pad offering an anti-slip surface that increases impact protection and is compatible with the MOE SL® Enhanced Rubber Butt-Pad for an additional 3/8” LOP.

Using a unique locking interface that attaches the barrel assembly to the receiver, the PC Backpacker provides an efficient solution for storage during transportation while maintaining convenient assembly from the stowed position. By including multiple QD cup mounting locations, we’ve made it easy to carry your Ruger® PC Carbine™ in either the broken down or assembled state with the Magpul Sling Mount Kit–Type 1 & Type 2.

We’ve also integrated two convenient storage locations. The first is a water-resistant grip storage compartment that provides an at-hand location for a small multi-tool, survival equipment, or cleaning equipment. The second is a compartment in the riser section that’s ideal for a single pistol magazine, fitting up to the PMAG® 21 GL9®.

Made in the USA.

BACKPACKER FLEXIBILITY

Unique locking interface to attach the barrel assembly to the stock body when being transported Optional QD sling mounting capability Water-resistant grip storage compartment and a second compartment in the riser section RUGGED POLYMER CONSTRUCTION Ergonomic M-LOK-compatible hand guard Interchangeable standard and optic-height cheek risers included