Home > Manufacturers > ShotStop

ShotStop Body Armor Plates for Sale at Northern Rifleman

Sort By:
Page of 3
FS3+6x6SC ShotStop Duritium III+PA Side Plate, Single Curve, Full Size Cut 6" x 6" x .7"

Level 3 Body Armor: 6 x 6 Inch Side Plate, LESS THAN 1 POUND!!

Protection Type/Level: Level III+

Compliance Tested: U.S. NIJ Level III 0101.06; NATO STANAG 2920 Level B4 tested compliant by accredited independent laboratories

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 0.9 lbs.

Thickness (+/-0.125"): 0.7 in. (1.8 cm.)

Warranty: 15 Years

Finish: Polyurea*

MSRP $212.00
Everyday Low Price $190.00
Savings: $22.00
6 in stock!
ICWRF1-5X8FSSC ShotStop Duritium III ICW Single Curve, Full Size Cut 5" x 8" x .6"

Duritium® III ICW (In Conjunction With) Body Armor Plates - Speed Plate, easily add to your soft armor to reach Level 3 protection.

Protection Type/Level: U.S. NIJ Level III ICW 0101.06 (In Conjunction With Level IIIA Soft Armor)

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 0.9 lbs.

Thickness (+/-0.125"): 0.6 in. (1.5 cm.)

Warranty: 15 Years

Finish: Polyurea

MSRP $204.00
Everyday Low Price $197.00
Savings: $7.00
6 in stock!
GT2RF2-6X6FSSC ShotStop Duritium GT2 Side Plate, Single Curve, Full Size Cut 6" x 6" x .6"

LEVEL 3 BODY ARMOR: SPECIAL THREAT BODY ARMOR: SIDE PLATE: THIS ULTRA-LOW PROFILE, LIGHTWEIGHT, MIL-SPEC PLATE IS DESIGNED TO DEFEAT MULTIPLE STRIKES AGAINST GREEN TIP (M855/SS109) 6 x 6 INCH SIDE PLATE.

Protection Type/Level: Special Threat

Compliance Tested: MIL-SPEC, Abbreviated U.S. Level III/Special Threat

Special Threat Testing: 5.56 x 45-mm, 62-grain M855 ball

Material Type: Duritium®

Weight : 1.3 lbs.

Thickness (+/-0.125"): 0.6 in. (1.52 cm.)

Warranty: 15 Years

Finish: Polyurea

MSRP $225.00
Everyday Low Price $203.00
Savings: $22.00
6 in stock!
FS3A10x12RA ShotStop BallisticBoard Level IIIA - Rigid Insert 10" x 12" x .26''

BallisticBoard® IIIA Bulletproof Backpack Insert

BallisticBoard® IIIA, made with DURITIUM® technology, is an ultra light, ultra thin ballistic material that is developed and manufactured in the USA to withstand multiple shot impacts from hand gun fire.

The 10” x 12” x .26” BallisticBoard IIIA rigid insert weighs just 1.2 lbs. and is perfect for placing in a backpack, computer bag, luggage, or purse to turn it into instant ballistic protection.

Tested by NIJ accredited laboratories to exceed national industry standards, BallisticBoard is your answer to safety, security, and the confidence that you or your loved one is protected.

MSRP $258.00
Everyday Low Price $209.00
Savings: $49.00
6 in stock!
FS3A10x12SA ShotStop BallisticBoard Level IIIA - Soft Insert 10" x 12" x .26''

BallisticBoard® IIIA Bulletproof Backpack Insert

BallisticBoard® IIIA, made with Duritium® technology, is an ultra light, ultra thin ballistic material that is developed and manufactured in the USA to withstand multiple shot impacts from hand gun fire.

The 10” x 12” x .26” BallisticBoard IIIA rigid insert weighs just 1.2 lbs. and is perfect for placing in a backpack, computer bag, luggage, or purse to turn it into instant ballistic protection.

Tested by NIJ accredited laboratories to exceed national industry standards, BallisticBoard is your answer to safety, security, and the confidence that you or your loved one is protected.

MSRP $258.00
Everyday Low Price $209.00
Savings: $49.00
6 in stock!
HA1RF3-6X6FSSC ShotStop Duritium IV+HA Single Curve, Full Size Cut 6" x 6" x 0.9"

Level 4 Body Armor Side Plates - The lightest Level 4 side plates in the world with a standard 10 year warranty!

Protection Type/Level: Level IV

Compliance Tested: U.S. Level IV

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ, NATO M855 (SS109) 5.56x45mm 62 grain steel core (SS109), M855 A1, 7.62x63mm M2 AP

Material Type: Duritium®

Weight (10x12 Shooter Cut): 1.4 lbs. (2.0 kg.)

Thickness (+/-0.125"): 0.9 in. (2.3 cm.)

Warranty: 10 Years

Finish: Polyurea

MSRP $235.00
Everyday Low Price $213.00
Savings: $22.00
6 in stock!
FS3A11x14RA ShotStop BallisticBoard Level IIIA - Rigid Insert 11" x 14" x .26''

BallisticBoard® IIIA Bulletproof Backpack Insert

BallisticBoard® IIIA, made with DURITIUM® technology, is an ultra light, ultra thin ballistic material that is developed and manufactured in the USA to withstand multiple shot impacts from hand gun fire.

The 10” x 12” x .26” BallisticBoard IIIA rigid insert weighs just 1.2 lbs. and is perfect for placing in a backpack, computer bag, luggage, or purse to turn it into instant ballistic protection.

Tested by NIJ accredited laboratories to exceed national industry standards, BallisticBoard is your answer to safety, security, and the confidence that you or your loved one is protected.

MSRP $298.00
Everyday Low Price $240.00
Savings: $58.00
6 in stock!
FS3A11x14SA ShotStop BallisticBoard Level IIIA - Soft Insert 11" x 14" x .26''

BallisticBoard® IIIA Bulletproof Backpack Insert

BallisticBoard® IIIA, made with Duritium® technology, is an ultra light, ultra thin ballistic material that is developed and manufactured in the USA to withstand multiple shot impacts from hand gun fire.

The 10” x 12” x .26” BallisticBoard IIIA rigid insert weighs just 1.2 lbs. and is perfect for placing in a backpack, computer bag, luggage, or purse to turn it into instant ballistic protection.

Tested by NIJ accredited laboratories to exceed national industry standards, BallisticBoard is your answer to safety, security, and the confidence that you or your loved one is protected.

MSRP $298.00
Everyday Low Price $240.00
Savings: $58.00
6 in stock!
FS3A10x12RACL ShotStop BallisticBoard Level IIIA - Clipboard 10" x 12" x .26''

BallisticBoard® IIIA Bulletproof Clipboard

BallisticBoard® IIIA Clipboard, made with Duritium® technology, is an ultra light, ultra thin ballistic material that is developed and manufactured in the USA to withstand multiple shot impacts from hand gun fire.

The 10” x 12” x .26” BallisticBoard IIIA Clipboard weighs just 1.3 lbs. and is perfect for placing in a backpack, computer bag, luggage, or purse to turn it into instant ballistic protection.

Tested by NIJ accredited laboratories to exceed national industry standards, BallisticBoard is your answer to safety, security, and the confidence that you or your loved one is protected.

MSRP $298.00
Everyday Low Price $240.00
Savings: $58.00
2 in stock!
ICWRF1-7X9FSSC ShotStop Duritium III ICW Single Curve, Full Size Cut 7" x 9" x .6"

Duritium® III ICW (In Conjunction With) Body Armor Plates - Speed Plate, add it to your soft armor to reach level 3 protection.

Protection Type/Level: U.S. NIJ Level III ICW 0101.06 (In Conjunction With Level IIIA Soft Armor)

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 1.2 lbs.

Thickness (+/-0.125"): 0.6 in. (1.5 cm.)

Warranty: 15 Years

Finish: Polyurea

MSRP $283.00
Everyday Low Price $267.00
Savings: $16.00
6 in stock!
PS1RF1-8x10SESC ShotStop Duritium III+PS Single-Curve, SAPI Cut 8" x 10" x .95"

LEVEL 3 BODY ARMOR: OUR MOST AFFORDABLE LIGHTWEIGHT LEVEL III+ BODY ARMOR PLATE INCLUDES AN INDUSTRY-LEADING STANDARD 15-YEAR WARRANTY

Protection Type/Level: Level III+

Compliance Tested: U.S. NIJ Level III 0101.06, German VPAM Level 6, and NATO STANAG 2920 Level B4 tested compliant by accredited independent laboratories

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (2.2 lbs.) 10 x 12 (3.4 lbs.) 11 x 14 (3.7 lbs.)

Thickness (+/-0.125"): 0.95 in. (2.41 cm.)

Warranty: 15 Years

Finish: Polyurea*

MSRP $353.00
Everyday Low Price $318.00
Savings: $35.00
6 in stock!
PS1RF1-8x10SHSC ShotStop Duritium III+PS Single-Curve, Shooters Cut 8" x 10" x .95"

LEVEL 3 BODY ARMOR: OUR MOST AFFORDABLE LIGHTWEIGHT LEVEL III+ BODY ARMOR PLATE INCLUDES AN INDUSTRY-LEADING STANDARD 15-YEAR WARRANTY

Protection Type/Level: Level III+

Compliance Tested: U.S. NIJ Level III 0101.06, German VPAM Level 6, and NATO STANAG 2920 Level B4 tested compliant by accredited independent laboratories

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (2.1 lbs.) 10 x 12 (3.2 lbs.) 11 x 14 (4.1 lbs.)

Thickness (+/-0.125"): 0.95 in. (2.41 cm.)

Warranty: 15 Years

Finish: Polyurea*

MSRP $353.00
Everyday Low Price $318.00
Savings: $35.00
6 in stock!
ICWRF1-8X10SEMC ShotStop Duritium III ICW Multi-Curve, SAPI Cut 8" x 10" x .6"

Duritium® III ICW (In Conjunction With) Body Armor Plates

Protection Type/Level: U.S. NIJ Level III ICW 0101.06 (In Conjunction With Level IIIA Soft Armor)

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (1.7 lbs.) 10 x 12 (2.4 lbs.)

Thickness (+/-0.125"): 0.6 in. (1.5 cm.)

Warranty: 15 Years

Finish: Polyurea

MSRP $361.00
Everyday Low Price $339.00
Savings: $22.00
6 in stock!
ICWRF1-8X10SEMC ShotStop Duritium III ICW Multi-Curve, Shooters Cut 8" x 10" x .6"

Duritium® III ICW (In Conjunction With) Body Armor Plates

Protection Type/Level: U.S. NIJ Level III ICW 0101.06 (In Conjunction With Level IIIA Soft Armor)

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (1.7 lbs.) 10 x 12 (2.4 lbs.)

Thickness (+/-0.125"): 0.6 in. (1.5 cm.)

Warranty: 15 Years

Finish: Polyurea

MSRP $336.00
Everyday Low Price $339.00
6 in stock!
ICWRF1-8X10FSMC ShotStop Duritium III ICW Multi-Curve, Full Size Cut 8" x 10" x .6"

Duritium® III ICW (In Conjunction With) Body Armor Plates

Protection Type/Level: U.S. NIJ Level III ICW 0101.06 (In Conjunction With Level IIIA Soft Armor)

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (1.7 lbs.) 10 x 12 (2.4 lbs.)

Thickness (+/-0.125"): 0.6 in. (1.5 cm.)

Warranty: 15 Years

Finish: Polyurea

MSRP $361.00
Everyday Low Price $339.00
Savings: $22.00
6 in stock!
HS1RF3-8x10SESC ShotStop Duritium IV+HS Single-Curve, SAPI Cut 8" x 10" x 0.9"

Duritium IV+HS Body Armor Plates

We Protect The Protectors

Armor-piercing protection at 2-3 lbs. (0.9-1.4 kg) less than most competitors and offers a 10-year warranty

Stopping one armor-piercing shot is required by the NIJ. Ours stopped six!

The Duritium IV+HS Level 4 body armor plate exceeds the NIJ requirement by 6x. Our patented Duritium® technology combines the hardness of composite alloy with the strength of Duritium® polyethylene to defeat the most powerful ammunition out there. Plus, with a 10-year warranty, you’ll have protection that lasts!

Product Information:
Protection Type/Level: Level IV
Special Threat Testing: 5.56x45mm 55 grain ball, 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ, 5.56x45mm 62 grain steel core, NATO M855 (SS109), 7.62x63mm M2AP
Material Type: Alloy-Composite
Weight (10x12 Shooter Cut): 5.3 lbs. (2.4 kg.)
Thickness (+/-0.125"): 0.9 in. (2.3 cm.)
Warranty: 10 Years
Strike Face Configuration: This ShotStop Ballistic plate's strike face falls within the current NIJ 0101.06 standard fair shot six-shot pattern. The strike face is rated for the Special Threat Testing listed above. The ballistic protective polyethylene perimeter is not fair shot rated to stop M855 and M2 AP bullets, but offers ballistic protection against 5.56x45mm 55 grain ball (M193), 7.62x39mm PS Ball, 9mm, 357 Mag, 44 Mag. The edging or buffer was engineered to allow for lighter weight, mobility, longevity and durability against corner cracking and drops. It also enables the plate to have an industry-leading warranty life.

MSRP $441.00
Everyday Low Price $398.00
Savings: $43.00
6 in stock!
HS1RF3-8x10SHSC ShotStop Duritium IV+HS Single-Curve, Shooters Cut 8" x 10" x 0.9"

Duritium IV+HS Body Armor Plates

We Protect The Protectors

Armor-piercing protection at 2-3 lbs. (0.9-1.4 kg) less than most competitors and offers a 10-year warranty

Stopping one armor-piercing shot is required by the NIJ. Ours stopped six!

The Duritium IV+HS Level 4 body armor plate exceeds the NIJ requirement by 6x. Our patented Duritium® technology combines the hardness of composite alloy with the strength of Duritium® polyethylene to defeat the most powerful ammunition out there. Plus, with a 10-year warranty, you’ll have protection that lasts!

Product Information:
Protection Type/Level: Level IV
Special Threat Testing: 5.56x45mm 55 grain ball, 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ, 5.56x45mm 62 grain steel core, NATO M855 (SS109), 7.62x63mm M2AP
Material Type: Alloy-Composite
Weight (10x12 Shooter Cut): 5.3 lbs. (2.4 kg.)
Thickness (+/-0.125"): 0.9 in. (2.3 cm.)
Warranty: 10 Years
Strike Face Configuration: This ShotStop Ballistic plate's strike face falls within the current NIJ 0101.06 standard fair shot six-shot pattern. The strike face is rated for the Special Threat Testing listed above. The ballistic protective polyethylene perimeter is not fair shot rated to stop M855 and M2 AP bullets, but offers ballistic protection against 5.56x45mm 55 grain ball (M193), 7.62x39mm PS Ball, 9mm, 357 Mag, 44 Mag. The edging or buffer was engineered to allow for lighter weight, mobility, longevity and durability against corner cracking and drops. It also enables the plate to have an industry-leading warranty life.

MSRP $411.00
Everyday Low Price $398.00
Savings: $13.00
6 in stock!
ICWRF1-10X12SEMC ShotStop Duritium III ICW Multi-Curve, SAPI Cut 10" x 12" x .6"

Duritium® III ICW (In Conjunction With) Body Armor Plates

Protection Type/Level: U.S. NIJ Level III ICW 0101.06 (In Conjunction With Level IIIA Soft Armor)

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (1.7 lbs.) 10 x 12 (2.4 lbs.)

Thickness (+/-0.125"): 0.6 in. (1.5 cm.)

Warranty: 15 Years

Finish: Polyurea

MSRP $444.00
Everyday Low Price $402.00
Savings: $42.00
6 in stock!
ICWRF1-10X12SHMC ShotStop Duritium III ICW Multi-Curve, Shooters Cut 10" x 12" x .6"

Duritium® III ICW (In Conjunction With) Body Armor Plates

Protection Type/Level: U.S. NIJ Level III ICW 0101.06 (In Conjunction With Level IIIA Soft Armor)

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (1.7 lbs.) 10 x 12 (2.4 lbs.)

Thickness (+/-0.125"): 0.6 in. (1.5 cm.)

Warranty: 15 Years

Finish: Polyurea

MSRP $444.00
Everyday Low Price $402.00
Savings: $42.00
6 in stock!
FS310x12RA ShotStop BallisticBoard Level III - Rigid Insert 10" x 12" x .7''

BallisticBoard® III RA - Rifle Protection (AR-15, AK-47)

BallisticBoard® III RA, made with DURITIUM® technology, is an ultra light, ultra thin ballistic material that is developed and manufactured in the USA to withstand multiple shot impacts from high-powered rifle fire.

The 10” x 12” x 0.7” BallisticBoard III RA rigid insert weighs just 3.75 lbs (4.75lbs. for the 11x14) and is perfect for placing in a backpack, computer bag, luggage, or purse to turn it into instant ballistic protection.

Tested by NIJ accredited laboratories to exceed national industry standards, BallisticBoard is your answer to safety, security, and the confidence that you or your loved one is protected.

MSRP $519.00
Everyday Low Price $419.00
Savings: $100.00
6 in stock!
SE3+8x10MC ShotStop Duritium III+PA Multi-Curve, SAPI Cut 8" x 10" x .7"

LEVEL 3 BODY ARMOR: THIS IS THE WORLD’S FASTEST STAND-ALONE RIFLE PLATE. AT JUST .7” THICK AND ONLY 2.7 LBS., YOU’LL HARDLY EVEN KNOW IT’S THERE

Protection Type/Level: Level III+ Compliance Tested: U.S. NIJ Level III 0101.06; NATO STANAG 2920 Level B4 tested compliant by accredited independent laboratories

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (1.9 lbs.) 10 x 12 (2.9 lbs.) 11 x 14 (3.7 lbs.)

Thickness (+/-0.125"): 0.7 in. (1.8 cm.)

Warranty: 15 Years

Finish: Polyurea*

MSRP $468.00
Everyday Low Price $422.00
Savings: $46.00
6 in stock!
SH3+8x10MC ShotStop Duritium III+PA Multi-Curve, Shooters Cut 8" x 10" x .7"

LEVEL 3 BODY ARMOR: THIS IS THE WORLD’S FASTEST STAND-ALONE RIFLE PLATE. AT JUST .7” THICK AND ONLY 2.7 LBS., YOU’LL HARDLY EVEN KNOW IT’S THERE

Protection Type/Level: Level III+ Compliance Tested: U.S. NIJ Level III 0101.06; NATO STANAG 2920 Level B4 tested compliant by accredited independent laboratories

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (1.8 lbs.) 10 x 12 (2.7 lbs.) 11 x 14 (3.5 lbs.)

Thickness (+/-0.125"): 0.7 in. (1.8 cm.)

Warranty: 15 Years

Finish: Polyurea*

MSRP $468.00
Everyday Low Price $422.00
Savings: $46.00
6 in stock!
FS311x14RA ShotStop BallisticBoard Level III - Rigid Insert 11" x 14" x .26''

BallisticBoard® III RA - Rifle Protection (AR-15, AK-47)

BallisticBoard® III RA, made with DURITIUM® technology, is an ultra light, ultra thin ballistic material that is developed and manufactured in the USA to withstand multiple shot impacts from high-powered rifle fire.

The 10” x 12” x 0.7” BallisticBoard III RA rigid insert weighs just 3.75 lbs (4.75lbs. for the 11x14) and is perfect for placing in a backpack, computer bag, luggage, or purse to turn it into instant ballistic protection.

Tested by NIJ accredited laboratories to exceed national industry standards, BallisticBoard is your answer to safety, security, and the confidence that you or your loved one is protected.

MSRP $545.00
Everyday Low Price $440.00
Savings: $105.00
6 in stock!
GT2RF2-8X10SEMC ShotStop Duritium GT2 Multi-Curve, SAPI Cut 8" x 10" x .6"

LEVEL 3 BODY ARMOR: SPECIAL THREAT BODY ARMOR: THIS ULTRA-LOW PROFILE, LIGHTWEIGHT, MIL-SPEC PLATE IS DESIGNED TO DEFEAT MULTIPLE STRIKES AGAINST GREEN TIP (M855/SS109)

Protection Type/Level: Special Threat

Compliance Tested: MIL-SPEC, Abbreviated U.S. Level III/Special Threat

Special Threat Testing: 5.56 x 45-mm, 62-grain M855 ball

Material Type: Duritium®

Weight: 8 x 10 (2.4 lbs.) 10 x 12 (3.8 lbs.) 11 x 14 (4.9 lbs)

Thickness (+/-0.125"): 0.6 in. (1.52 cm.)

Warranty: 15 Years

Finish: Polyurea*

MSRP $499.00
Everyday Low Price $450.00
Savings: $49.00
6 in stock!
GT2RF2-8X10SHMC ShotStop Duritium GT2 Multi-Curve, Shooters Cut 8" x 10" x .6"

LEVEL 3 BODY ARMOR: SPECIAL THREAT BODY ARMOR: THIS ULTRA-LOW PROFILE, LIGHTWEIGHT, MIL-SPEC PLATE IS DESIGNED TO DEFEAT MULTIPLE STRIKES AGAINST GREEN TIP (M855/SS109)

Protection Type/Level: Special Threat

Compliance Tested: MIL-SPEC, Abbreviated U.S. Level III/Special Threat

Special Threat Testing: 5.56 x 45-mm, 62-grain M855 ball

Material Type: Duritium®

Weight: 8 x 10 (2.4 lbs.) 10 x 12 (3.8 lbs.) 11 x 14 (4.9 lbs)

Thickness (+/-0.125"): 0.6 in. (1.52 cm.)

Warranty: 15 Years

Finish: Polyurea*

MSRP $499.00
Everyday Low Price $450.00
Savings: $49.00
6 in stock!
HA1RF3-8x10SEMC ShotStop Duritium IV+HA Multi-Curve, SAPI Cut 8" x 10" x 0.9"

Armor Piercing Protection at only 4.5 lbs. and 0.9” thick! This is the lightest Level 4 Body Armor Plate money can buy, this will withstand multiple hits from AP 7.62 X 63.

Protection Type/Level: Level IV

Compliance Tested: U.S. Level IV

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ, NATO M855 (SS109) 5.56x45mm 62 grain steel core (SS109), M855 A1, 7.62x63mm M2 AP

Material Type: Duritium®

Weight (10x12 Shooter Cut): 4.5 lbs. (2.0 kg.) (11x14 Shooter Cut) 5.8 lbs. (2.6 kg.)

Thickness (+/-0.125"): 0.9 in. (2.3 cm.)

Warranty: 10 Years

Finish: Polyurea

MSRP $519.00
Everyday Low Price $469.00
Savings: $50.00
6 in stock!
HA1RF3-8x10SHMC ShotStop Duritium IV+HA Multi-Curve, Shooters Cut 8" x 10" x 0.9"

Armor Piercing Protection at only 4.5 lbs. and 0.9” thick! This is the lightest Level 4 Body Armor Plate money can buy, this will withstand multiple hits from AP 7.62 X 63.

Protection Type/Level: Level IV

Compliance Tested: U.S. Level IV

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ, NATO M855 (SS109) 5.56x45mm 62 grain steel core (SS109), M855 A1, 7.62x63mm M2 AP

Material Type: Duritium®

Weight (10x12 Shooter Cut): 4.5 lbs. (2.0 kg.) (11x14 Shooter Cut) 5.8 lbs. (2.6 kg.)

Thickness (+/-0.125"): 0.9 in. (2.3 cm.)

Warranty: 10 Years

Finish: Polyurea

MSRP $519.00
Everyday Low Price $469.00
Savings: $50.00
6 in stock!
PS1RF1-10x12SESC ShotStop Duritium III+PS Single-Curve, SAPI Cut 10" x 12" x .95"

LEVEL 3 BODY ARMOR: OUR MOST AFFORDABLE LIGHTWEIGHT LEVEL III+ BODY ARMOR PLATE INCLUDES AN INDUSTRY-LEADING STANDARD 15-YEAR WARRANTY

Protection Type/Level: Level III+

Compliance Tested: U.S. NIJ Level III 0101.06, German VPAM Level 6, and NATO STANAG 2920 Level B4 tested compliant by accredited independent laboratories

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (2.2 lbs.) 10 x 12 (3.4 lbs.) 11 x 14 (3.7 lbs.)

Thickness (+/-0.125"): 0.95 in. (2.41 cm.)

Warranty: 15 Years

Finish: Polyurea*

MSRP $530.00
Everyday Low Price $478.00
Savings: $52.00
6 in stock!
PS1RF1-10x12SHSC ShotStop Duritium III+PS Single-Curve, Shooters Cut 10" x 12" x .95"

LEVEL 3 BODY ARMOR: OUR MOST AFFORDABLE LIGHTWEIGHT LEVEL III+ BODY ARMOR PLATE INCLUDES AN INDUSTRY-LEADING STANDARD 15-YEAR WARRANTY

Protection Type/Level: Level III+

Compliance Tested: U.S. NIJ Level III 0101.06, German VPAM Level 6, and NATO STANAG 2920 Level B4 tested compliant by accredited independent laboratories

Special Threat Testing: 5.56x45mm 55 grain ball (M193), 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ

Material Type: Duritium®

Weight: 8 x 10 (2.1 lbs.) 10 x 12 (3.2 lbs.) 11 x 14 (4.1 lbs.)

Thickness (+/-0.125"): 0.95 in. (2.41 cm.)

Warranty: 15 Years

Finish: Polyurea*

MSRP $530.00
Everyday Low Price $478.00
Savings: $52.00
6 in stock!
HS1RF3-8.75x11.75SESC ShotStop Duritium IV+HS Single-Curve, SAPI Cut 8.75" x 11.75" x 0.9"

Duritium IV+HS Body Armor Plates

We Protect The Protectors

Armor-piercing protection at 2-3 lbs. (0.9-1.4 kg) less than most competitors and offers a 10-year warranty

Stopping one armor-piercing shot is required by the NIJ. Ours stopped six!

The Duritium IV+HS Level 4 body armor plate exceeds the NIJ requirement by 6x. Our patented Duritium® technology combines the hardness of composite alloy with the strength of Duritium® polyethylene to defeat the most powerful ammunition out there. Plus, with a 10-year warranty, you’ll have protection that lasts!

Product Information:
Protection Type/Level: Level IV
Special Threat Testing: 5.56x45mm 55 grain ball, 7.62x39mm PS ball (MSC), 7.62x51mm 149 grain M80 FMJ, 5.56x45mm 62 grain steel core, NATO M855 (SS109), 7.62x63mm M2AP
Material Type: Alloy-Composite
Weight (10x12 Shooter Cut): 5.3 lbs. (2.4 kg.)
Thickness (+/-0.125"): 0.9 in. (2.3 cm.)
Warranty: 10 Years
Strike Face Configuration: This ShotStop Ballistic plate's strike face falls within the current NIJ 0101.06 standard fair shot six-shot pattern. The strike face is rated for the Special Threat Testing listed above. The ballistic protective polyethylene perimeter is not fair shot rated to stop M855 and M2 AP bullets, but offers ballistic protection against 5.56x45mm 55 grain ball (M193), 7.62x39mm PS Ball, 9mm, 357 Mag, 44 Mag. The edging or buffer was engineered to allow for lighter weight, mobility, longevity and durability against corner cracking and drops. It also enables the plate to have an industry-leading warranty life.

MSRP $569.00
Everyday Low Price $514.00
Savings: $55.00
6 in stock!