Submit search
FBS is an advanced, low-profile, durable, auxiliary front sight. It can be used with any rear sight, but has been designed to provide an extreme optical advantage when paired with the FAB Defense® RBS Rear Back-up Sight. Sight pin elevation is easily and quickly adjusted without tools. FBS is readily mounted on any 1913 Picatinny rail, making it ideal for use on M4 / AR-15 / M-16 platforms and on the FAB Defense® KPOS. Advantages: - Can be used as a primary or back-up sight - Ergonomic angel-wing-shaped front shroud helps center the image with any rear sight, but when used with a matching FAB Defense® RBS Rear Back-up Sight, it creates a precise optical tunnel that ensures more accurate aiming and faster target acquisition - Low folded profile is smooth and inconspicuous, and will not snag on gear, webbing, or brush - Instant spring-locked deployment mechanism will not slip, break or deform - No tools needed for easy, rapid elevation adjustments, with positive detent locking - Made of extremely durable high-grade polymer and metal - Available in black, olive drab green or flat dark earth Compatibility: - All 1913 Picatinny rails - The FBS should never be mounted on a railed gas block
This is the OEM front flip sight that is equipped with the KRISS Vector and DEFIANCE firearms. This sight is extremely low profile, designed to tuck completely out of vision when folded, sitting a mere 12.7mm above the rail surface. The DEFIANCE Front Sight features a very wide range of elevation adjustment, accommodating for a large spectrum of firearms with various height over bore and sight radius measurements. Finally, the large, textured, adjustment knob makes elevation changes with gloves simple and easy. DIMENSIONS Length Folded 2.0" / 50.8mm Width at Base 1.19" / 30.22mm Width at Body 0.96" / 24.38mm Height Folded 0.50" / 12.7mm Weight 0.50oz / 14.17g
This is the OEM front flip sight that is equipped with the KRISS Vector and DEFIANCE firearms. This sight is extremely low profile, designed to tuck completely out of vision when folded, sitting a mere 12.7mm above the rail surface. The DEFIANCE Front Sight features a very wide range of elevation adjustment, accommodating for a large spectrum of firearms with various height over bore and sight radius measurements. Finally, the large, textured, adjustment knob makes elevation changes with gloves simple and easy. DIMENSIONS Length Folded 2.0" / 50.8mm Width at Base 1.19" / 30.22mm Width at Body 0.96" / 24.38mm Height Folded 0.50" / 12.7mm
This is the OEM polymer rear flip sight that is equipped with the KRISS Vector and DEFIANCE firearms. This sight is extremely low profile, designed to tuck completely out of vision when folded, sitting a mere 14.22mm above the rail surface. The DEFIANCE Rear Sight features two apertures, 1.5mm diameter and 4.5mm diameter, for different lighting and shooting conditions. Additionally, the rear sight folds down completely flat regardless which aperture is in use, in order to be as user friendly as possible. Finally, the large, textured, adjustment knob makes windage changes with gloves simple and easy. DIMENSIONS Length Folded 2.25" / 57.25mm Width at Base 1.19" / 30.22mm Width at Body 1.19" / 30.22mm Height Folded .56" / 14.22mm Weight 0.75oz / 21.26g Large Aperture Dia. .18" / 4.5mm Small Aperture Dia. 0.06" / 1.5mm
This is the OEM polymer rear flip sight that is equipped with the KRISS Vector and DEFIANCE firearms. This sight is extremely low profile, designed to tuck completely out of vision when folded, sitting a mere 14.22mm above the rail surface. The DEFIANCE Rear Sight features two apertures, 1.5mm diameter and 4.5mm diameter, for different lighting and shooting conditions. Additionally, the rear sight folds down completely flat regardless which aperture is in use, in order to be as user friendly as possible. Finally, the large, textured, adjustment knob makes windage changes with gloves simple and easy. DIMENSIONS Length Folded 2.25" / 57.25mm Width at Base 1.19" / 30.22mm Width at Body 1.19" / 30.22mm Height Folded .56" / 14.22mm Large Aperture Dia. .18" / 4.5mm Small Aperture Dia. 0.06" / 1.5mm
Carrying Handle, Detachable Mil-Spec
The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform. Made in U.S.A.
The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform.Made in U.S.A.
The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform.Made in U.S.A.
The MBUS Pro (Magpul Back-Up Sight) is a corrosion resistant all-steel back-up sighting solution that delivers maximum functionality and strength with minimum bulk at a price that's even smaller than its size.The dual aperture, windage adjustable Rear and no-tool, elevation adjustable Front excel in all 1913 Picatinny rail mounting applications, including rail-height gas blocks. Positive detents keep the MBUS Pro Front and Rear at standard AR sight height when deployed, and so low when they are stowed that you'll never notice them until they're needed. Narrow width Front is compatible with most IR aiming laser and light installations for the professional user. Made in U.S.A.
The new MBUS Pro LR capitalizes on the low profile and sleek styling of the original MBUS Pro, while adding the additional feature of an elevation adjustment wheel to accurately engage targets at variable distances. Built with all steel construction, this is the sighting solution that delivers no-tool adjustments, maximum strength, corrosion resistance, and functionality in a compact package. Positive detents keep the MBUS Pro LR at standard AR sight height when deployed and so low when stowed that you will hardly notice them. Made in U.S.A.
Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution. The MBUS Pro Offset Front Sight features durable Melonited steel construction, positive detented lockup when deployed, tool-less adjustment of the front post for easy zeroing, and a low profile footprint to ensure compatibility and reduce interference with most rifle setups. Made in U.S.A.
Building on the proven MBUS Pro platform, the MBUS Pro Offset Sights are part of an an effective aiming system to supplement magnified optics on M1913 Picatinny mounting surfaces. In the event of a damaged or nonfunctional primary optic, or a close target, rotating the rifle 45 degrees provides the shooter with a fully-featured iron sighting solution. The MBUS Pro Offset Rear Sight features durable Melonited steel construction, positive detented lockup when deployed, tool-less windage adjustment for easy zeroing, dual rear apertures, and a low profile footprint to ensure compatibility and reduce interference with most rifle setups. Made in U.S.A.
Based on an optical illumination patent, the MEPRO FT Bullseye is an extremely small, low profile, optical pistol sight. Similar to reflex sights, using the MEPRO FT Bullseye provides the shooter with an aim point in the form of an illuminated dot and circle Bullseye. Shooters can enjoy intuitive and fast target acquisition. The Fiber-optic Tritium combination enables instant and accurate shooting in all lighting conditions with no batteries needed. The Fiber-optic used in bright light or day shooting and the premium-grade Tritium provides instant illumination at night or in low-light conditions. The MEPRO FT Bullseye installation is simple and easy on existing pistol dovetails, eliminates the need for a front sight and fits most existing holsters. Unique Advantages: - Smallest optical sight in the world based on patented optical illumination. - Superior visibility in all lighting conditions. - No front sight needed. - Fast and intuitive target acquisition. - Fits most existing holsters. - Simple, easy installation on existing pistol dovetail. - No Batteries – No Switches – Always On- Always Ready. - Nighttime Illumination guaranteed for 12 years.
M400 Tread Adjustable flip sights that are quickly deployable, foldable and built exclusively for the TREAD picatinny rail. *Includes Picatinny Rail and mounting screw/nut*
Sig Sauer XRAY Night Sight P228/229/239 Round Notch Compare the X-RAY3 to other conventional sights and you will see the blacked-out rear sight and the high contrast front sight of the X-RAY3, make target acquisition intuitive and fast and in any light condition. This 3-Dot tritium system has a superior glowing illumination in low-light and remains bright and white for daylight conditions. No more changing sights from night to day patrols, keeping your sights consistent for all your work or hunting light conditions. The steel surrounds the tritium sights and gives them protection from recoil and protects from cleaning solvents and the harsh elements. Whether you carry for work or for sport, these X-RAY3 tritium sights will be bright for over a decade and the tested design of the X-RAY3 will stay at max performance. FEATURES: • With a half-life of 12 years, the 3-Dot tritium system allows for fast target acquisition in low-light conditions • Oversized chemical resistant fluorescent polymer front dot gives confidence in any environment • Sights come in standard SIG SAUER sizes of #6 and #8 in square or round (U)notched rear sight • Torture tested to 20,000 rounds, the steel housing provides for a tough, reliable sight that lasts as long as the firearm • Fits P320, P938, P238, P229, P226, P220, P227, P225 • X-RAY3 sights come standard on SIG SAUER Legion Series pistols. Which Sight Size Is Right For Your Pistol? The X-RAY3 sights come in sets ranging from matching #6s, alternating #6/8s, and matching #8/8. To determine the current size of your pistol sights, look at the small number on the horizontally aligned bar on either side of the sight post. That number should be available on both your front and rear sight. If you have determined that you are satisfied with your current pistol sights, simply select the exact same number combination from the X-RAY3 product line. For reference: SOX10005, SOX10006 - #6 Front / #6 Rear SOX10001, SOX10002 - #6 Front / #8 Rear SOX10007, SOX10008 - #8 Front / #6 Rear SOX10003, SOX10004 - #8 Front / #8 Rear
Sig Sauer XRAY Night Sight P228/229/239 Square Notch Compare the X-RAY3 to other conventional sights and you will see the blacked-out rear sight and the high contrast front sight of the X-RAY3, make target acquisition intuitive and fast and in any light condition. This 3-Dot tritium system has a superior glowing illumination in low-light and remains bright and white for daylight conditions. No more changing sights from night to day patrols, keeping your sights consistent for all your work or hunting light conditions. The steel surrounds the tritium sights and gives them protection from recoil and protects from cleaning solvents and the harsh elements. Whether you carry for work or for sport, these X-RAY3 tritium sights will be bright for over a decade and the tested design of the X-RAY3 will stay at max performance. FEATURES: • With a half-life of 12 years, the 3-Dot tritium system allows for fast target acquisition in low-light conditions • Oversized chemical resistant fluorescent polymer front dot gives confidence in any environment • Sights come in standard SIG SAUER sizes of #6 and #8 in square or round (U)notched rear sight • Torture tested to 20,000 rounds, the steel housing provides for a tough, reliable sight that lasts as long as the firearm • Fits P320, P938, P238, P229, P226, P220, P227, P225 • X-RAY3 sights come standard on SIG SAUER Legion Series pistols. Which Sight Size Is Right For Your Pistol? The X-RAY3 sights come in sets ranging from matching #6s, alternating #6/8s, and matching #8/8. To determine the current size of your pistol sights, look at the small number on the horizontally aligned bar on either side of the sight post. That number should be available on both your front and rear sight. If you have determined that you are satisfied with your current pistol sights, simply select the exact same number combination from the X-RAY3 product line. For reference: SOX10005, SOX10006 - #6 Front / #6 Rear SOX10001, SOX10002 - #6 Front / #8 Rear SOX10007, SOX10008 - #8 Front / #6 Rear SOX10003, SOX10004 - #8 Front / #8 Rear
Sig Sauer XRAY Night Sight P938/P320 Round Notch Compare the X-RAY3 to other conventional sights and you will see the blacked-out rear sight and the high contrast front sight of the X-RAY3, make target acquisition intuitive and fast and in any light condition. This 3-Dot tritium system has a superior glowing illumination in low-light and remains bright and white for daylight conditions. No more changing sights from night to day patrols, keeping your sights consistent for all your work or hunting light conditions. The steel surrounds the tritium sights and gives them protection from recoil and protects from cleaning solvents and the harsh elements. Whether you carry for work or for sport, these X-RAY3 tritium sights will be bright for over a decade and the tested design of the X-RAY3 will stay at max performance. FEATURES: • With a half-life of 12 years, the 3-Dot tritium system allows for fast target acquisition in low-light conditions • Oversized chemical resistant fluorescent polymer front dot gives confidence in any environment • Sights come in standard SIG SAUER sizes of #6 and #8 in square round (U)notched rear sight • Torture tested to 20,000 rounds, the steel housing provides for a tough, reliable sight that lasts as long as the firearm • Fits P320, P938, P238, P229, P226, P220, P227, P225 • X-RAY3 sights come standard on SIG SAUER Legion Series pistols. Which Sight Size Is Right For Your Pistol? The X-RAY3 sights come in sets ranging from matching #6s, alternating #6/8s, and matching #8/8. To determine the current size of your pistol sights, look at the small number on the horizontally aligned bar on either side of the sight post. That number should be available on both your front and rear sight. If you have determined that you are satisfied with your current pistol sights, simply select the exact same number combination from the X-RAY3 product line. For reference: SOX10005, SOX10006 - #6 Front / #6 Rear SOX10001, SOX10002 - #6 Front / #8 Rear SOX10007, SOX10008 - #8 Front / #6 Rear SOX10003, SOX10004 - #8 Front / #8 Rear
Sig Sauer XRAY Night Sight P938/P320 Square Notch Compare the X-RAY3 to other conventional sights and you will see the blacked-out rear sight and the high contrast front sight of the X-RAY3, make target acquisition intuitive and fast and in any light condition. This 3-Dot tritium system has a superior glowing illumination in low-light and remains bright and white for daylight conditions. No more changing sights from night to day patrols, keeping your sights consistent for all your work or hunting light conditions. The steel surrounds the tritium sights and gives them protection from recoil and protects from cleaning solvents and the harsh elements. Whether you carry for work or for sport, these X-RAY3 tritium sights will be bright for over a decade and the tested design of the X-RAY3 will stay at max performance. FEATURES: • With a half-life of 12 years, the 3-Dot tritium system allows for fast target acquisition in low-light conditions • Oversized chemical resistant fluorescent polymer front dot gives confidence in any environment • Sights come in standard SIG SAUER sizes of #6 and #8 in square or round (U)notched rear sight • Torture tested to 20,000 rounds, the steel housing provides for a tough, reliable sight that lasts as long as the firearm • Fits P320, P938, P238, P229, P226, P220, P227, P225 • X-RAY3 sights come standard on SIG SAUER Legion Series pistols. Which Sight Size Is Right For Your Pistol? The X-RAY3 sights come in sets ranging from matching #6s, alternating #6/8s, and matching #8/8. To determine the current size of your pistol sights, look at the small number on the horizontally aligned bar on either side of the sight post. That number should be available on both your front and rear sight. If you have determined that you are satisfied with your current pistol sights, simply select the exact same number combination from the X-RAY3 product line. For reference: SOX10005, SOX10006 - #6 Front / #6 Rear SOX10001, SOX10002 - #6 Front / #8 Rear SOX10007, SOX10008 - #8 Front / #6 Rear SOX10003, SOX10004 - #8 Front / #8 Rear
Streamlight 3V Lithium CR123 Battery12 Pack
Streamlight 3V Lithium Battery2 Pack
Streamlight 3V Lithium Battery6 Pack
Streamlight Battery CR2, 2-Pack