Spike's Tactical Products for Sale at Northern Rifleman

The A2 bird cage flash suppressor is the standard muzzle device of the U.S. Armed Forces and is found on most M4/M16 rifles as well as many AR-15 rifles.

SPECS
- Thread: 1/2x28
- Compatible: Calibers Up To .223/5.56 NATO
- Finish: Mil-Spec Heavy Phosphate Finish
- Includes: Mil-Spec Crush Washer
- Length: 1.75" Length
- Weight: 2.2oz

We offer our standard ejection port door or if you want to customize your rifle we have a selection of custom engravings for you to choose from.

Engraved w/ Pirate and Arrgh

Mil-Spec Ejection Port Door
Mil-Spec Heavy Phosphate Coating
Weight: .50oz

We offer our standard ejection port door or if you want to customize your rifle we have a selection of custom engravings for you to choose from.

Engraved w/ Punisher and Flag

Mil-Spec Ejection Port Door
Mil-Spec Heavy Phosphate Coating
Weight: .50oz

We offer our standard ejection port door or if you want to customize your rifle we have a selection of custom engravings for you to choose from.

Engraved w/ Zombie Killer

Mil-Spec Ejection Port Door
Mil-Spec Heavy Phosphate Coating
Weight: .50oz

We offer our standard ejection port door or if you want to customize your rifle we have a selection of custom engravings for you to choose from.

Engraved w/ Spider and Flag

Mil-Spec Ejection Port Door
Mil-Spec Heavy Phosphate Coating
Weight: .50oz

We offer our standard ejection port door or if you want to customize your rifle we have a selection of custom engravings for you to choose from.

Engraved w/ Spider and Biohazard

Mil-Spec Ejection Port Door
Mil-Spec Heavy Phosphate Coating
Weight: .50oz

We offer our standard ejection port door or if you want to customize your rifle we have a selection of custom engravings for you to choose from.

Engraved w/ Crusader Shield & Deus Vult

Mil-Spec Ejection Port Door
Mil-Spec Heavy Phosphate Coating
Weight: .50oz

This is the same high quality carbine buffer spring that’s found in our complete rifles, complete lowers, and in our various stock kits that we have on the site. It’s a Mil-Spec 17-7 stainless steel buffer spring that features an electro polish finish to give it a smoother quality look and feel. If you need a replacement buffer spring or just need one to finish a build, look no further. Get one today!

- Material: 17-7 Stainless Steel Spring
- Finish: Electro Polish
- Weight: 1.7oz

The Spike’s Tactical Forward Assist Assembly Kit includes the pieces you need to install a functional forward assist into your stripped upper receiver.

- Mil-Spec Forward Assist
- Forward Assist Spring
- Forward Assist Retention Pin
- Weight: .79oz

If you are looking for a high quality gas tube look no more. These are the same gas tubes that we install on our ST-15 rifles and all of our complete upper receivers.

Pistol Length Tube
- Mil-Spec 304 stainless steel
- Black Nitride Finish
- Stainless Steel Roll Pin

Weight: .38oz

If you are looking for a high quality gas tube look no more. These are the same gas tubes that we install on our ST-15 rifles and all of our complete upper receivers.

Carbine Length Tube
- Mil-Spec 304 stainless steel
- Black Nitride Finish
- Stainless Steel Roll Pin

Weight: .60oz

If you are looking for a high quality gas tube look no more. These are the same gas tubes that we install on our ST-15 rifles and all of our complete upper receivers.

Midlength Tube
- Mil-Spec 304 stainless steel
- Black Nitride Finish
- Stainless Steel Roll Pin

Weight: .73oz

If you are looking for a high quality gas tube look no more. These are the same gas tubes that we install on our ST-15 rifles and all of our complete upper receivers.

Rifle Length Tube
- Mil-Spec 304 stainless steel
- Black Nitride Finish
- Stainless Steel Roll Pin

Weight: .96oz

The Spike’s Tactical Delta Ring assembly is fully Mil-Spec and comes ready for you to finish your new upper. The barrel nut is machined from tough chromoly steel, is properly heat treated, and of course completed with a phosphate finish. We also finished the weld spring and snap ring in a phosphate finish per Mil-Spec. The delta ring itself is made of Mil-Spec aluminum and features a black anodized finish. Inside the package you’ll find everything already installed so you can quickly mount your barrel and get that build one step closer to being finished.

Assembly Includes
- Barrel Nut
- Weld Spring
- Snap Ring
- Delta Ring

Weight: 2.5oz

The Spike’s Tactical Pro Grip is a drop in upgrade for your AR-15. It is durable and has an ergonomically correct feel.

NOTE: This replacement grip doesn’t come with a grip screw and star washer.

Material: Reinforced Polymer Construction
Features: Spider Pattern Inlayed in Grip
Weight: 2.4oz

Plug your lower receiver instead of using a buffer tube. This piece is designed to be used with self contained BCG/Buffer assembly type units in the upper. A .22 caliber BCG unit is the most common example.

Material: Billet Aluminum
Finish: Hard Coat Anodize
Feature:Q.D. Socket
Weight: 1.1oz

Standard AR-15 charging handle compatible with all of our upper options.

Forged 7075 T6 Aluminum Construction

Mil-Spec Type-III Hardcoat Anodized Finish

Weight: 1.1oz

High quality standard AR-15 height double set screw gas block.

Low Profile Gas Block
- Solid Billet Steel
- .750 I.D.
- Black Nitride Coating

Weight: 1.9oz

The Spike’s Tactical Billet Trigger Guard Gen II a drop in replacement trigger guard that’s styled after our billet lowers trigger guard. The extra room that this billet trigger guard provides is excellent when using just shooting gloves or even cold weather gloves. It also fills that annoying gap in between the standard trigger guard and the front of the grip. The front of the trigger guard has a spring loaded detent much like a mil-spec trigger guard. The rear uses a solid cross pin with a groove machined in the center. A captured spring in the trigger guard itself makes installation as easy as aligning and inserting the pin. A rubber bumper built into the trigger guard eliminates any rattling.

- Material: 6061 Billet Aluminum Construction
- Finish: Mil-Spec Type III Hardcoat Anodizing
- Features: No Tools Needed
- Weight: .44oz

High quality standard AR-15 height double set screw gas block.

Low Profile Gas Block
- Solid Billet Steel
- .750 I.D.
- Black Nitride Coating

Weight: 1.9oz

Looking for a heavy buffer to replace your standard carbine buffer? Well, we came up with something that offers the HIGHEST performance at a reasonable price. The ST-T2 buffer is one of the softest shooting, smoothest, and quietest buffers on the market; not to mention it looks awesome! It is 100% maintenance free!

- Material: Solid Aluminum Billet
- Finish: Black Anodized
- Features: Crushed Tungsten, Mil-Spec Bumper
- Weight: 3oz

Spike’s Tactical is happy to offer a Mil-Spec 6-Position buffer tube.

- Material: 7075-T6 Aluminum
- Finish: Type III Hardcoat Anodized
- Features: Laser Engraved Positions
- Weight: 3.6oz
- Length: 7 1/4"

Looking for a heavy buffer to replace your standard carbine buffer? Well, we came up with something that offers the HIGHEST performance at a reasonable price. The ST-T2 buffer is one of the softest shooting, smoothest, and quietest buffers on the market; not to mention it looks awesome! It is 100% maintenance free!

- Material: Solid Aluminum Billet
- Finish: Black Anodized
- Features: Crushed Tungsten, Mil-Spec Bumper
- Weight: 3oz

This kit is designed to be used with your Jack10 or Livewire set. To complete the lower you will want to also purchase a buffer tube assembly, stock, and trigger group of your choice. Proudly made here in the USA.

For .308 Livewire and Jack10 Billet Sets

Better Than Mil-Spec Quality Parts

Included
- Safety Selector, Detent, and Spring
- Magazine Catch, Spring and Billet Mag Button
- Buffer Retainer Spring and Plunger
- Spike's Pro Grip, 1/4x28” Hex Screw, and Star Lock Washer

Weight: 3.8oz

This particular Dynacomp end cap was specifically developed for the Spike’s Tactical Barking Spider 2 muzzle brake. The Dynacomp end cap’s design and construction is based off of our original and very effective Dynacomp compensator. Just like the original barrel mounted Dynacomp, the Dynacomp end cap drastically reduces felt recoil and muzzle rise allowing you to put more shots on target in a shorter period of time. It’s threaded modular design allows you to quickly install and remove the end cap for different uses and applications.

Material: Billet 4140 Chromoly Bar Stock
Finish: Heat Treated Black Nitride
Features: Ball Dimpled Expansion Ports
Weight: 2oz

NOTE: Specifically for use with the Spike's Tactical Barking Spider 2 muzzle brake

Looking for a heavy buffer to replace your standard carbine buffer? Well, we came up with something that offers the HIGHEST performance at a reasonable price. The ST-T2 buffer is one of the softest shooting, smoothest, and quietest buffers on the market; not to mention it looks awesome! It is 100% maintenance free!

- Material: Solid Aluminum Billet
- Finish: Black Anodized
- Features: Crushed Tungsten, Mil-Spec Bumper
- Weight: 3oz

We started with a mission to make the best factory LPK on the market today! The kit we came up with exceeds Military Specifications by a long shot while also offering a much better fit and finish! Our LPK is proudly 100% made right here in the USA and comes with our LIFETIME warranty!

Better than Mil-Spec quality

Included
- Rounded Hammer (Works with ALL Calibers) and Hammer Spring
- Trigger and Trigger Spring
- Disconnector and Disconnector Spring
- Stainless Hammer and Trigger Pin with Black Oxide finish
- Safety Selector, Detent, and Spring
- Bolt Catch, Spring, Roll Pin, and Plunger
- Magazine Catch, Spring and Button
- Front Pivot and Rear Takedown Pin w/ Detent and Springs
- Aluminum Trigger Guard with Spring Loaded Detent and Roll Pin
- Buffer Retainer Spring and Plunger

Weight: 7.5oz

Spike’s Tactical stainless steel heavy buffer for use in a carbine stock. The ST-9X is a dedicated 9mm buffer due to its extended length. Its extended length helps eliminate the problem of breaking bolt catches. The buffer will smooth the gun out, make it more reliable and decrease the amount of gas in your face when shooting suppressed.

- Material: 303 Stainless Steel
- Finish: Raw
- Feature: Lasered Spider
- Weight: 7.7oz

At Spike’s Tactical, we believe our customers should be able to own the same tools we made for ourselves to use in the armory. All of our tools are high grade and professional quality.

For use with: M-LOK .308 Rail – SMRX012, SMRX015

Material: 4140 Chromoly Steel, Heat Treated
Finish: Black Nitrite

Recoil? What recoil? This brake has extremely large side ports for diverting the gas followed by the projectile outwards for excellent recoil management. If taming the beast is what you want then look no further!

Material: 4150 Steel
Thread: 1/2 X 28
Finish: Black Nitride
Features: Large Side Porting
Weight: 2.6oz