Home > Knives & Swords > Swords
Swords for Sale
Sort By:
Page of 2
926937 38" 1827 Naval Sword

- 38" Overall
- 31" Blade
- 6" Handle
- White Handle with Gold Saber Head
- 1827 Naval Sword
- Wire Wrapped Handle
- Gold Finish Guard Loop
- Fold Down Inner Guard
- Stainless Steel Blade
- Scabbard

List Price: $75.00
Our Price: $75.00
3 in stock!
926938 38" Cavalry Saber Sword

- 38" Overall
- 31.5" Blade
- 6" Handle
- Stainless Steel Blade
- Gold Finish Guard Loop
- Wire Wrapped Handle
- Scabbard

List Price: $75.00
Our Price: $75.00
3 in stock!
88SCFD Cold Steel Heavy Duty Sword Cane

The Cold Steel Heavy Duty Sword Cane is quite possibly the toughest and widest sword cane ever built! It features an extra strong partial crook handle made from heavy duty nylon, and a 2mm thick aluminum shaft thats heat-treated for strength. The tapered shaft is capped with a thick rubber ferrule for better traction on slick, icy sidewalks or uneven terrain. The concealed blade is released by quickly pulling on the handle to break the suction of its friction lock. Made from Stainless Steel with a proprietary heat treatment and tempering, its a hard and resilient blade thats sturdy enough for both cutting and thrusting. This is no mere show piece! This Cane conceals a true battle-ready sword, proven in our infamous PROOF videos to make the kind of cuts one would expect from a high quality saber!

*Sales Disclaimer: If you are not sure about the legality of any item for sale on our website, you MUST contact your local District Attorney's Office and ask them if you can carry or own suspected items in your state. Many states allow you to own suspected items but not carry them. Suspected items are not to be used as weapons or to cause bodily harm or damage to personal property in any way. Its YOUR responsibility to know the law before you order. Its the responsibility of the buyer, NOT THE SELLER, to ascertain, and obey, all applicable local, state, federal and international laws in regard to the possession and use of any item on this site - we cannot possibly keep track of over 40,000 weapons control laws. All equipment is sold subject to public law 90-351, title III, U.S.D., Section 2511, and any local, state or federal ordinances. Also, any attempt in entrapment by any law enforcement agency will be met with swift legal action. Cold Steel Inc. will not be held liable for the misuse of any product listed on this website. For International Orders, please check with your local county and country officials or law enforcement to see if legal in your area, it is YOUR responsibility to know your laws before ordering. By purchasing any item from our site - the buyer warrants compliance with all local, state, federal and international law, and that the buyer is legally able to purchase such items from our website or catalog. Cold Steel Inc. disclaims any and all liability related to improper, illegal, unintended use or modification of weapons sold through our website or catalog. The purchaser, user or participant assumes all risk of injury from any use.

- Weight: 26.9oz
- Blade Thickness: N/A
- Blade Length: N/A
- Blade Steel: 3Cr13 Stainless
- Handle Length/Material: Heavy Duty Nylon
- Overall Length: 37-1/2in
- Additional Features: NOT FOR SALE TO RESIDENTS OF CA

List Price: $132.99
Our Price: $114.00
Savings: $18.99
(Out of Stock)
88SCFA Cold Steel Aluminum Head Sword Cane

This elegant sword cane closely resembles our popular City Stick, and comes with a removable highly polished Aluminum head. It features a tough fiberglass carbon fiber composite shaft that can be used as an effective self-defense tool in its own right. The light and fast blade has a tapered square cross section with a sharp point.

*Sales Disclaimer: If you are not sure about the legality of any item for sale on our website, you MUST contact your local District Attorney's Office and ask them if you can carry or own suspected items in your state. Many states allow you to own suspected items but not carry them. Suspected items are not to be used as weapons or to cause bodily harm or damage to personal property in any way. It’s YOUR responsibility to know the law before you order. It’s the responsibility of the buyer, NOT THE SELLER, to ascertain, and obey, all applicable local, state, federal and international laws in regard to the possession and use of any item on this site - we cannot possibly keep track of over 40,000 weapons control laws. All equipment is sold subject to public law 90-351, title III, U.S.D., Section 2511, and any local, state or federal ordinances. Also, any attempt in entrapment by any law enforcement agency will be met with swift legal action. Cold Steel Inc. will not be held liable for the misuse of any product listed on this website. For International Orders, please check with your local county and country officials or law enforcement to see if legal in your area, it is YOUR responsibility to know your laws before ordering. By purchasing any item from our site - the buyer warrants compliance with all local, state, federal and international law, and that the buyer is legally able to purchase such items from our website or catalog. Cold Steel Inc. disclaims any and all liability related to improper, illegal, unintended use or modification of weapons sold through our website or catalog. The purchaser, user or participant assumes all risk of injury from any use.

- Weight: 25.3oz
- Blade Thickness: N/A
- Blade Length: N/A
- Blade Steel: 1055 Carbon Steel w/ Carbon Fiber Shaft
- Handle Length/Material: N/A
- Overall Length: N/A
- Additional Features: NOT LEGAL FOR RESIDENTS IN CA

List Price: $199.99
Our Price: $171.00
Savings: $28.99
(Out of Stock)
88CLQ Cold Steel Hunting Sword

The hunting sword or Hanger is an iconic short bladed weapon (seldom over 26) that became quite popular in Europe and the Americas during the 16th and 17th centuries. Among the reasons for its popularity, outside of the dictates of fashion, was that it was an immensely handy, effective sword that was the perfect companion whether you were on foot, horseback, or on a crowded deck at sea! Like many of the originals, our version is quite stylish. The blade is satin polished with multiple fullers and a wicked false edge. The intricately hand carved handle is made from Rosewood and ornamented with nickel-silver pins. The scabbards style harmonizes engagingly with the swords design. Its made from heavy, black leather and capped at each end with an embossed nickel-silver throat and chape.

- Weight: 34.9oz
- Blade Thickness: N/A
- Blade Length: 24in
- Blade Steel: 1055 Carbon
- Handle Length/Material: 5-1/4in Rosewood
- Overall Length: 29-1/4in
- Additional Features: N/A

List Price: $339.99
Our Price: $291.00
Savings: $48.99
(Out of Stock)
88S Cold Steel 1796 Light Cavalry Saber (Leather Scabbard)

Our Cold Steel 1796 Light Cavalry Saber is inspired by the iconic swords used by the British and their allies at the Battle of Waterloo. Its distinctive blade profile is considered by some to have been derived from the Indian Talwar, and it gained such popularity that it remained in use (by the German Cavalry) until the beginning of the Twentieth century! But this is more than just an historically inspired showpiece - its a high quality modern saber that is fully capable of passing the famous British Proof Test for quality and durability. It comes with a fully sharpened forward edge, and your choice of a wood and leather scabbard with steel mounts and fittings, or the traditional all steel scabbard.

- Weight: 34.2oz
- Blade Thickness: 5/16in
- Blade Length: 33in
- Blade Steel: 1055 Carbon
- Handle Length/Material: 4-3/4in
- Overall Length: 37-3/4in
- Additional Features: Leather Scabbard with Steel Fittings

List Price: $369.99
Our Price: $316.00
Savings: $53.99
(Out of Stock)
88SS Cold Steel 1796 Light Cavalry Saber (Metal Scabbard)

Our Cold Steel 1796 Light Cavalry Saber is inspired by the iconic swords used by the British and their allies at the Battle of Waterloo. Its distinctive blade profile is considered by some to have been derived from the Indian Talwar, and it gained such popularity that it remained in use (by the German Cavalry) until the beginning of the Twentieth century! But this is more than just an historically inspired showpiece - its a high quality modern saber that is fully capable of passing the famous British Proof Test for quality and durability. It comes with a fully sharpened forward edge, and your choice of a wood and leather scabbard with steel mounts and fittings, or the traditional all steel scabbard.

- Weight: 34.2oz
- Blade Thickness: 5/16in
- Blade Length: 33in
- Blade Steel: 1055 Carbon
- Handle Length/Material: 4-3/4in
- Overall Length: 37-3/4in
- Additional Features: Steel Scabbard

List Price: $369.99
Our Price: $316.00
Savings: $53.99
(Out of Stock)
88NS Cold Steel 1813 Napoleonic Saber

Napoleons cavalry was the bane of the European battlefield. His troops were equipped with first rate blades, manufactured in a state-of-the-art factory dedicated to producing the finest edged weapons of the day. Our 1813 Napoleon Saber takes inspiration from these exceptional swords, with an elegantly curved 1055 Carbon Steel blade and long, wide fuller, culminating in a very sharp, but practical point. The grip is equally well made. Its wrapped in black leather and strongly protected by a stout, brass three bar hilt. The whole package comes with a heavy duty hand polished steel scabbard with dual rings for attachment to a baldric or sword belt.

- Weight: 37.7oz
- Blade Thickness: 5/16in
- Blade Length: 33-3/4in
- Blade Steel: 1055 Carbon
- Handle Length/Material: 5-1/4in
- Overall Length: 39in
- Additional Features: Steel Scabbard

List Price: $399.99
Our Price: $342.00
Savings: $57.99
(Out of Stock)
88EBTS Cold Steel Thompson Saber

Cold Steel's Thompson Saber is not a historical or period-specific sword; rather it is a newly developed, thoroughly modern saber. Designed by Cold Steel President Lynn C. Thompson, and bearing his name, the Thompson Saber was created to Lynn's exact specifications. Lynn said: "I wanted to make a battle sword. Not a dueling sword as such, but a true sword fighter's blade for the modern martial artist" "inIt's ground to my exact specifications; as it slightly favors the cut over the thrust, it's hair shaving sharp for the first six inches from the point, then gradually less sharp down through the rest of the blade, leaving enough material to block, parry and even bludgeon an opponent's blade. It's deeply blued to aid in rust resistance, but also to make the blade harder to see in the fast paced cut and thrust of combat!" The Thompson Saber has a modified 1904 Saber guard and a sizeable ray skin wrapped handle that will accommodate even big modern fencer's gloves. The Thompson Saber comes complete with a heavy duty thick leather and steel scabbard with a leather belt frog for ease of carry.

- Weight: 33.8oz
- Blade Thickness: 5/16"
- Blade Length: 32"
- Blade Steel: 1055 Carbon
- Handle Length/Material: 5-3/4"
- Overall Length: 37-3/4"
- Additional Features: Cord Wrapped Samé (Ray Skin) Handle. Leather Scabbard with Blued Steel Fittings.

List Price: $399.99
Our Price: $342.00
Savings: $57.99
(Out of Stock)
88HCS Cold Steel U.S. 1860 Heavy Cavalry Saber

During the American Civil War, there were two types of saber issued to the Cavalry: one light and one heavy. The light version was popular, but the heavy model, affectionately dubbed the Old Wrist Breaker was considered by many to be the one to carry into battle! With a lengthy 36" blade, it offered distinctive reach advantages over most blades, and its added weight gave it superior leverage and power. Taking inspiration from antique blades in private collections, our saber is made from 1055 carbon steel with a hard spring temper that is capable of passing the famous British Proof Test. This beautiful sword is sold complete with a double ringed steel scabbard which can easily be attached to a saddle or belt.

- Weight: 40oz
- Blade Thickness: 1/3in
- Blade Length: 36in
- Blade Steel: 1055 Carbon
- Handle Length/Material: 5-1/2in
- Overall Length: 41-1/2in
- Additional Features: Ambidextrous Pocket / Belt Clip

List Price: $399.99
Our Price: $342.00
Savings: $57.99
(Out of Stock)
88SEB Cold Steel English Back Sword

We are proud to add our interpretation of a 17th Century English Mortuary Hilt Sword. Inspired by historical examples, this nimble single-handed sword is fast and lively in the hand and a sheer delight to train with. Able to land a decisive blow even when cutting fast from the wrist, this beautiful sword has already proven to be very popular among our crew, who have proclaimed it to be one of their favorite one handed cutters. Made from 1055 Carbon Steel and supplied with a mild patina to give an antiqued finish, each English Backsword is fully sharpened and supplied complete with an ornate leather and steel scabbard. An excellent addition to the collection of any Historical European Martial Artist or Historical Re-enactor. What a brave weapon is a short sharp light sword, to carry, to draw, to be nimble withal, to strike, to cut, to thrust both strong and quick - Paradoxes of Defense - George Silver. 1599

- Weight: 37.2oz
- Blade Thickness: 6mm
- Blade Length: 32in
- Blade Steel: 1055 Carbon
- Handle Length/Material: 6-1/2in
- Overall Length: 38-1/2in
- Additional Features: Black Leather Scabbard with Steel Fittings

List Price: $399.99
Our Price: $342.00
Savings: $57.99
(Out of Stock)
88SN Cold Steel Italian Dueling Saber

Most military sabers are effective for cutting and thrusting, but they can be heavy and are challenging to wield with precision for any length of time. The Italian Dueling Saber, however, is different! Its long, slim, moderately curved blade is feather light and you can easily write your name in scarlet with its razor edge. Many years ago, Maestro Ramon Martinez introduced this fiercely effective blade to our president, Lynn C. Thompson, and Lynn was impressed enough to want to produce one for Cold Steel. Our Italian Dueling Saber is best described as ornate. The blade, artfully forged, tempered, and polished has an attractive deep scroll etching that is sure to capture your eye, and the intricately pierced guard is made from brightly polished nickel steel. The guard has rolled edges and provides unsurpassed protection for a swordsmans hand and forearm. The handsome scabbard is made of thick black leather and features a mirror polished and etched throat and chape, with dual carrying rings.

- Weight: 21.8oz
- Blade Thickness: 3/16in
- Blade Length: 32in
- Blade Steel: 1055 Carbon
- Handle Length/Material: 6in
- Overall Length: 38in
- Additional Features: N/A

List Price: $399.99
Our Price: $342.00
Savings: $57.99
(Out of Stock)
88BT Cold Steel O Tanto (Warrior Series)

Since their initial introduction, Cold Steel's Emperor Series swords have proven to be popular with many of our customers. Still, we are aware that there are some people who want a battle ready sword but hope to find one at a more affordable price. Our Warrior Series addresses this problem directly. The Warrior Series swords share the same high-performance 1060 steel, heat treatment, and sharpness as their Emperor counterparts, but we have omitted their expensive mirror polishing in favor of a more practical finish. This makes the Warrior Series a perfect choice for training and perfecting cutting techniques (Tameshigiri) without damaging or tarnishing the blade.

- Weight: 18.5oz
- Blade Thickness: 5/16"
- Blade Length: 13-1/4"
- Blade Steel: 1060 Carbon
- Handle Length/Material: 6"
- Overall Length: 19-1/4"
- Additional Features: Samé (Ray Skin) Handle with Black Braid Cord and Brass Menuki. Black Lacquered Wood Scabbard.

List Price: $419.99
Our Price: $359.00
Savings: $60.99
(Out of Stock)
88RPS Cold Steel Polish Saber

The latest addition to our line-up of high-performance swords is inspired by examples of early 17th Century Polish Sabers. Used both on horseback and on foot, these battlefield sabers had a fearsome reputation, not least for the skill-at-arms of the Polish Noblemen who wielded them, but also for their phenomenal cutting potential. Our interpretation of this historically significant blade was designed by custom bladesmith Dave Baker, and is made from expertly heat treated Carbon Steel. With a fully sharpened, distal tapered and strongly curved blade, the Polish Saber is capable of delivering exceptional cuts, while still remaining stiff enough for the thrust. Equipped with a solid steel, brass inlaid guard and knuckle bow for hand protection and a functional thumb ring to facilitate the moulinet allowing the wielder to keep the blade in continuous motion, parrying, cutting and changing direction at great speed! With an eye-catching leather wire wrapped hilt, and matching leather scabbard and brass inlays left blank for personal engraving, this sword is as good looking as it is functional, and its sure to be the pride of any European Martial Artist or blade enthusiasts collection.

- Weight: 40oz
- Blade Thickness: 1/4in
- Blade Length: 32in
- Blade Steel: 1055 Carbon
- Handle Length/Material: 6in
- Overall Length: 38in
- Additional Features: Red Leather Scabbard with Steel Fittings

List Price: $439.99
Our Price: $376.00
Savings: $63.99
(Out of Stock)
88SMS Cold Steel Small Sword

Toward the end of the 17th century, a sophisticated, shorter and lighter version of the Rapier emerged as the tool of choice for personal carry and defense - the Small Sword. Its stiff, lightweight blade was forged in a triangular cross section, and the hilt was both simple and smartly functional, consisting of no more than an elliptical plate, or two shells and a knuckle guard. Cold Steel's modern version duplicates the best features of many historical examples, but uses 1060 carbon steel, heat treated to a tough spring temper. The hilt features two shells with functional finger loops and a light, but exceptionally strong, knuckle guard. Each Small Sword also comes complete with an attractive leather scabbard with an intricately decorated throat and chape.

- Weight: 24.6oz
- Blade Thickness: 7/16"
- Blade Length: 31-1/4"
- Blade Steel: 1060 Carbon
- Handle Length/Material: 7"
- Overall Length: 38-1/4"
- Additional Features: Scabbard

List Price: $469.99
Our Price: $402.00
Savings: $67.99
(Out of Stock)
88FCR Cold Steel Cavalier Rapier

By the mid-1600's dueling was at the height of its popularity. In fact, this trend for settling affairs of honor with steel reached such heights that King Louis XIII of France outlawed dueling for fear of losing too many of his important dignitaries to this dangerous pursuit! Aristocratic noblemen saw it as their manly duty to defend their honor at sword-point, and as such began not only seeking out the knowledge and training imparted by specialist sword masters, but also exploring new types of weapons to help them gain a decisive edge. One particular sword began to gain popularity - a smaller, lighter and faster version of the Rapier that was easier to carry and quicker in combat. A precursor to what would eventually become the Small Sword referred to by many simply as the "transitional rapier"in. Cold Steel's interpretation of this blade (which we have named the Cavalier Rapier) features a sharp double edged and needle tipped blade which is decidedly shorter and lighter than a classic Rapier, allowing for much more speed and agility. With a tempered steel pierced shell guard, rings, quillons and knuckle bow it offers astonishingly good hand protection, while its wire wrapped grip and counter balancing pommel give great comfort and liveliness in-hand. Provided complete with a hand-stitched leather sheath with steel throat, chape and integral belt hook for ease of carry.

- Weight: 38.4oz
- Blade Thickness: 1/5"
- Blade Length: 36"
- Blade Steel: 1055 Carbon
- Handle Length/Material: 8-1/4"
- Overall Length: 44-1/4"
- Additional Features: N/A

List Price: $499.99
Our Price: $427.00
Savings: $72.99
(Out of Stock)
88BWW Cold Steel Wakizashi (Warrior Series)

Since their initial introduction, Cold Steel's Emperor Series swords have proven to be popular with many of our customers. Still, we are aware that there are some people who want a battle ready sword but hope to find one at a more affordable price. Our Warrior Series addresses this problem directly. The Warrior Series swords share the same high-performance 1060 steel, heat treatment, and sharpness as their Emperor counterparts, but we have omitted their expensive mirror polishing in favor of a more practical finish. This makes the Warrior Series a perfect choice for training and perfecting cutting techniques (Tameshigiri) without damaging or tarnishing the blade.

- Weight: 30.6oz
- Blade Thickness: 5/16"
- Blade Length: 21"
- Blade Steel: 1060 Carbon
- Handle Length/Material: 8-1/2"
- Overall Length: 29/12"
- Additional Features: Samé (Ray Skin) Handle with Black Braid Cord and Brass Menuki. Black Lacquered Wood Scabbard.

List Price: $509.99
Our Price: $436.00
Savings: $73.99
(Out of Stock)
88BWWK Cold Steel Wakizashi Long Handle

Since their initial introduction, Cold Steel's Emperor Series swords have proven to be popular with many of our customers. Still, we are aware that there are some people who want a battle ready sword but hope to find one at a more affordable price. Our Warrior Series addresses this problem directly. The Warrior Series swords share the same high-performance 1060 steel, heat treatment, and sharpness as their Emperor counterparts, but we have omitted their expensive mirror polishing in favor of a more practical finish. This makes the Warrior Series a perfect choice for training and perfecting cutting techniques (Tameshigiri) without damaging or tarnishing the blade.

- Weight: N/A
- Blade Thickness: 5/16"
- Blade Length: 21"
- Blade Steel: 1060 Carbon
- Handle Length/Material: 11-1/4"
- Overall Length: 32-1/4"
- Additional Features: Samé (Ray Skin) Handle with Black Braid Cord and Brass Menuki. Black Lacquered Wood Scabbard.

List Price: $529.99
Our Price: $453.00
Savings: $76.99
(Out of Stock)
88BCK Cold Steel Chisa Katana

Since their initial introduction, Cold Steels Emperor Series swords have proven to be popular with many of our customers. Still, we are aware that there are some people who want a battle ready sword but hope to find one at a more affordable price. Our Warrior Series addresses this problem directly. The Warrior Series swords share the same high-performance 1060 steel, heat treatment, and sharpness as their Emperor counterparts, but we have omitted their expensive mirror polishing in favor of a more practical finish. This makes the Warrior Series a perfect choice for training and perfecting cutting techniques (Tameshigiri) without damaging or tarnishing the blade.

- Weight: 42.5oz
- Blade Thickness: 5/16in
- Blade Length: 24-1/2in
- Blade Steel: 1060 Carbon
- Handle Length/Material: 11-1/2in
- Overall Length: 36in
- Additional Features: Black lacquered wood scabbard. Sam© (Ray Skin) Handle with Black Braid Cord and Brass Menuki.

List Price: $579.99
Our Price: $496.00
Savings: $83.99
(Out of Stock)
88BKW Cold Steel Katana (Warrior Series)

Since their initial introduction, Cold Steel's Emperor Series swords have proven to be popular with many of our customers. Still, we are aware that there are some people who want a battle ready sword but hope to find one at a more affordable price. Our Warrior Series addresses this problem directly. The Warrior Series swords share the same high-performance 1060 steel, heat treatment, and sharpness as their Emperor counterparts, but we have omitted their expensive mirror polishing in favor of a more practical finish. This makes the Warrior Series a perfect choice for training and perfecting cutting techniques (Tameshigiri) without damaging or tarnishing the blade.

- Weight: 41.4oz
- Blade Thickness: 5/16"
- Blade Length: 29-1/4"
- Blade Steel: 1060 Carbon
- Handle Length/Material: 11-1/4"
- Overall Length: 40-1/2"
- Additional Features: Black lacquered wood scabbard. Samé (Ray Skin) Handle with Black Braid Cord and Brass Menuki

List Price: $589.99
Our Price: $504.00
Savings: $85.99
(Out of Stock)
88T Cold Steel O Tanto (Emperor Series)

Cold Steels Emperor O Tanto is styled to reflect some of the most distinctive hallmarks of Japanese sword design. We use only traditional materials for our Tsuba (guard), Fuchi (collar), and Kashira (pommel) - Each piece is expertly made and finely crafted in nickel-silver. The Habaki (blade collar) is also hand-made from nickel-silver and the hilt is covered in samé (ray skin) and tightly wrapped in the traditional style with black silk cord. A beautiful Menuki (a small, ornamental sculpture inserted between the ray skin and the cord wrappings) further enhances the handles appearance. All of our Emperor swords feature fully sharpened 1060 carbon steel blades that are heat treated to a tough spring temper. The blade is then carefully hand-finished with a beautiful mirror polish applied to the fuller.

- Weight: 20oz
- Blade Thickness: 5/16in
- Blade Length: 13-1/4in
- Blade Steel: 1060 Carbon
- Handle Length/Material: 6-1/8in
- Overall Length: 19-3/8in
- Additional Features: Sam© (Ray Skin) Handle with Black Braid Cord and Brass Menuki. Black Lacquered Wood Scabbard.

List Price: $599.99
Our Price: $513.00
Savings: $86.99
(Out of Stock)
88DW Cold Steel Dragonfly Wakizashi

Many Japanese swords offered today are interpretive copies of antiquities from feudal Japan, and they were made for warriors of small stature who seldom rose above five and a half feet. As beautiful and skillfully designed as these swords are, they may not be perfectly suited for the modern warrior, who has grown to be a substantially taller and stronger version of his historical counterpart! With that in mind, Cold Steel has created the Dragonfly Series - a line of Japanese swords featuring thicker, wider and heavier blades. These beautiful swords have a distinctive teal-green silk cord-wrap and black samé (ray skin) handles, complementing rich iron furniture with a dragonfly motif. Their deeply curved and hand polished 1060 steel blades terminate in a long iris leaf point for maximum cutting potential. Additionally, these swords come with two protective bags. A blue cotton travel bag and an intricately decorative display bag made from fine heavy silk brocade.

- Weight: 30.3oz
- Blade Thickness: 5/16in
- Blade Length: 22in
- Blade Steel: 1060 Carbon
- Handle Length/Material: 9-1/2in
- Overall Length: 31-1/2in
- Additional Features: Sam© (Ray Skin) Handle with Teal Green Silk Braid Cord & Brass Menuki. Black Lacquered Wood Scabbard.

List Price: $649.99
Our Price: $556.00
Savings: $93.99
(Out of Stock)
88DWK Cold Steel Dragonfly Wakizashi Long Handle

Many Japanese swords offered today are interpretive copies of antiquities from feudal Japan, and they were made for warriors of small stature who seldom rose above five and a half feet. As beautiful and skillfully designed as these swords are, they may not be perfectly suited for the modern warrior, who has grown to be a substantially taller and stronger version of his historical counterpart! With that in mind, Cold Steel has created the Dragonfly Series - a line of Japanese swords featuring thicker, wider and heavier blades. These beautiful swords have a distinctive teal-green silk cord-wrap and black samé (ray skin) handles, complementing rich iron furniture with a dragonfly motif. Their deeply curved and hand polished 1060 steel blades terminate in a long "iris leaf" point for maximum cutting potential. Additionally, these swords come with two protective bags. A blue cotton travel bag and an intricately decorative display bag made from fine heavy silk brocade.

- Weight: N/A
- Blade Thickness: 5/16"
- Blade Length: 22"
- Blade Steel: 1060 Carbon
- Handle Length/Material: 11 1/2" Samé (Ray Skin) Handle with Teal Green Silk Braid Cord & Brass Menuki
- Overall Length: 33-1/2"
- Additional Features: Samé (Ray Skin) Handle with Teal Green Silk Braid Cord & Brass Menuki.Black Lacquered Wood Scabbard.

List Price: $669.99
Our Price: $573.00
Savings: $96.99
(Out of Stock)
88CHR Cold Steel Ribbed Shell Swept Hilt Rapier

The Rapier enjoyed a long reign as the civilian weapon of choice for self-defense and dueling for centuries! Its long, double-edged blade was ideal for delivering the point at great distances. Its elaborate hilt (evolving from rings, bars and quillons, to shells, and chiseled cups) offered excellent protection and caught or deflected blows with ease. Sadly, the rapier eventually succumbed to the dictates of fashion and gave way to smaller swords. Our modern interpretation of this historical classic has a long, narrow blade with a single wide fuller to assure perfect balance. Its hilt features a classic ribbed shell and multiple bars, quillons and a knuckle bow for hand protection. The grip is made of wood covered with rich black ray skin and wire and terminates in a heavy ribbed pommel that serves as a perfect counter balance to our Rapier's blade.

- Weight: 48oz
- Blade Thickness: 1/5"
- Blade Length: 41-1/2"
- Blade Steel: 1060 Carbon
- Handle Length/Material: 9"
- Overall Length: 50-1/2"
- Additional Features: Leather Scabbard with steel fittings

List Price: $699.99
Our Price: $598.00
Savings: $101.99
(Out of Stock)
88CKW Cold Steel Mizutori (Crane) Wakizashi

The Crane is a symbol of luck and longevity, loyalty and strength, and is a much-loved symbol in Japan. As we developed a new Katana to add to our long standing and world-renowned line-up of Japanese blades, we felt it only fitting to add the Crane as a motif. The Mizutori's blade is made from high quality 1095 carbon steel and differentially hardened with a clay tempered Hamon. The handsome blade features a hand sharpened Hamaguri grind with highly polished spine and blade flats. The Tsuba and Menuki both feature an iconic crane motif, and the high quality ray-skin handle is tightly wrapped in brown silk cord, adding a level of detail and beauty that must be seen to be believed. Housed inside a lustrous black lacquered Saya, the Mizutori Katana a stunning and attractive sword that is sure to become the pride of your collection! The Mizutori (Crane) Wakizashi mirrors the materials, fit and finish of its larger brother in every way except size. It's equally light and fast, and with the same high-quality materials, but at a fraction of the size, making it an exquisite companion piece to the Mizutori Katana, or a beautiful stand-alone blade.

- Weight: 28.1oz
- Blade Thickness: 7mm
- Blade Length: 21"
- Blade Steel: 1095 Carbon
- Handle Length/Material: 6-1/2"
- Overall Length: 27-1/2"
- Additional Features: Samé (Ray Skin) handle with brown braid cord and brass menuki. Black lacquered wood scabbard.

List Price: $699.99
Our Price: $598.00
Savings: $101.99
(Out of Stock)
88W Cold Steel Wakizashi (Emperor Series)

Cold Steels Emperor Wakizashi sword is styled to reflect some of the most distinctive hallmarks of Japanese sword design. We use only traditional materials for our Tsuba (guard), Fuchi (collar), and Kashira (pommel) - Each piece is expertly made and finely crafted in nickel-silver.The Habaki (blade collar) is also hand-made from nickel-silver and the hilt is covered in samé (ray skin) and tightly wrapped in the traditional style with black silk cord. A beautiful Menuki (a small, ornamental sculpture inserted between the ray skin and the cord wrappings) further enhances the handles appearance. All of our Emperor swords feature fully sharpened 1060 carbon steel blades that are heat treated to a tough spring temper. The blade is then carefully hand-finished with a beautiful mirror polish applied to the fuller.

- Weight: 25oz
- Blade Thickness: 9/32in
- Blade Length: N/A
- Blade Steel: 1060 Carbon
- Handle Length/Material: 6-1/2in
- Overall Length: 27-1/2in
- Additional Features: Samé (Ray Skin) Handle with Black Braid Cord and Brass Menuki. Black Lacquered Wood Scabbard.

List Price: $699.99
Our Price: $598.00
Savings: $101.99
(Out of Stock)
88ABW Cold Steel Gold Lion Wakizashi

The Cold Steel Gold Lion Katana represents a Samurai's "every day carry sword" for personal protection, and the defense of his Lord, his family and his home. Significantly lighter than some of our other heavier-duty Katanas, it is not only faster in-hand, but easier and more comfortable to carry when tucked into an Obi and worn all day. The Katana's Menuki bears the symbol of the Japanese Shisa (Lion Dog) a guardian or protector - a fitting motif for this beautiful lightweight sword. Measuring just under thirty inches, the Gold Lion Katana's blade is made from expertly hand honed and highly polished Damascus steel, with an Hamaguri grind, peaked Lori Mune spine and undulating clay-tempered Hamon. The black iron Tsuba, Fuchi and Kashira all have gleaming 24 carat gold leaf accents and the handle features white ray-skin and a black silk cord wrap. The Gold Lion Wakizashi mirrors the materials, fit and finish of its larger brother in every way except size. It's equally light and fast, and with the same high-quality materials, but at a fraction of the size, making it an exquisite companion piece to the Gold Lion Katana, or a beautiful stand-alone blade in its own right.

- Weight: 22.4oz
- Blade Thickness: 6mm
- Blade Length: 21"
- Blade Steel: Damascus
- Handle Length/Material: 7-1/4"
- Overall Length: 28-1/4"
- Additional Features: Black Lacquered Wood Scabbard. Samé (Ray Skin) Handle with Black Braid Cord and Brass Menuki.

List Price: $739.99
Our Price: $632.00
Savings: $107.99
(Out of Stock)
88DK Cold Steel Dragonfly Katana

Many Japanese swords offered today are interpretive copies of antiquities from feudal Japan, and they were made for warriors of small stature who seldom rose above five and a half feet. As beautiful and skillfully designed as these swords are, they may not be perfectly suited for the modern warrior, who has grown to be a substantially taller and stronger version of his historical counterpart! With that in mind, Cold Steel has created the Dragonfly Series - a line of Japanese swords featuring thicker, wider and heavier blades. The Dragonfly Katana is a beautiful sword with a distinctive teal-green silk cord-wrap and black samé (ray skin) handles, complementing rich iron furniture with a dragonfly motif. Their deeply curved and hand polished 1060 steel blades terminate in a long "iris leaf" point for maximum cutting potential. Additionally, these swords come with two protective bags. A blue cotton travel bag and an intricately decorative display bag made from the finest heavy silk brocade.

- Weight: 39.4oz
- Blade Thickness: 5/16"
- Blade Length: 29-1/4"
- Blade Steel: 1055 Carbon
- Handle Length/Material: 11-1/2"
- Overall Length: 40-3/4"
- Additional Features: Samé (Ray Skin) Handle with Teal Green Silk Braid Cord & Brass Menuki. Black Lacquered Wood Scabbard.

List Price: $799.99
Our Price: $684.00
Savings: $115.99
(Out of Stock)
88CKK Cold Steel Mizutori (Crane) Katana

The Crane is a symbol of luck and longevity, loyalty and strength, and is a much-loved symbol in Japan. As we developed a new Katana to add to our long standing and world-renowned line-up of Japanese blades, we felt it only fitting to add the Crane as a motif. The Mizutori (Crane) Katana is a high-end, high-performance blade that was inspired by older, practical battlefield Katanas. Measuring a hair under thirty inches, the Mizutoris blade is made from high quality 1095 carbon steel and differentially hardened with a clay tempered Hamon. The handsome blade features a hand sharpened Hamaguri grind with highly polished spine and blade flats. The Tsuba and Menuki both feature an iconic crane motif, and the high quality ray-skin handle is tightly wrapped in brown silk cord, adding a level of detail and beauty that must be seen to be believed. Housed inside a lustrous black lacquered Saya, the Mizutori Katana a stunning and attractive sword that is sure to become the pride of your collection! The Mizutori (Crane) Wakizashi mirrors the materials, fit and finish of its larger brother in every way except size. Its equally light and fast, and with the same high-quality materials, but at a fraction of the size, making it an exquisite companion piece to the Mizutori Katana, or a beautiful stand-alone blade.

- Weight: 43.2oz
- Blade Thickness: 7mm
- Blade Length: 29-3/4in
- Blade Steel: 1095 Carbon
- Handle Length/Material: 11-1/2in
- Overall Length: 41-1/4in
- Additional Features: Sam© (Ray Skin) Handle with Brown Braid Cord and Brass Menuki. Black Lacquered Wood Scabbard.

List Price: $824.99
Our Price: $705.00
Savings: $119.99
(Out of Stock)
88DEC Cold Steel Double Edge Katana (Emperor Series)

Cold Steel's Emperor Double Edge Katana is styled to reflect some of the most distinctive hallmarks of Japanese sword design. We use only traditional materials for our Tsuba (guard), Fuchi (collar), and Kashira (pommel) - Each piece is expertly made and finely crafted in nickel-silver. The Habaki (blade collar) is also hand-made from nickel-silver and the hilt is covered in samé (ray skin) and tightly wrapped in the traditional style with black silk cord. A beautiful Menuki (a small, ornamental sculpture inserted between the ray skin and the cord wrappings) further enhances the handles appearance. All of our Emperor swords feature fully sharpened 1060 carbon steel blades that are heat treated to a tough spring temper. The blade is then carefully hand-finished with a beautiful mirror polish applied to the fuller.

- Weight: 37.2oz
- Blade Thickness: 9/32"
- Blade Length: 28-3/4"
- Blade Steel: 1060 Carbon
- Handle Length/Material: 11-1/4"
- Overall Length: 40-3/4"
- Additional Features: N/A

List Price: $824.99
Our Price: $705.00
Savings: $119.99
(Out of Stock)