Home > Accessories > Tools
Tools
Sort By:
Page of 2
TL008 Tacfire AR Lower Receiver Vise Block

Lower Vise Block is made of Solvent resistant polymer construction for strength & durability. It allows for safe mounting and will help to prevent any type of distort or damage to the Lower receiver. Great to use when performing your regular maintenance, repairs or weapon assembly. Fits into the magazine housing from either the top or bottom, and the magazine catch will securely lock your receiver into place in the vise.

MSRP $8.99
Our Price: $8.99
Online Sale Price $4.99
Savings: $4.00
AR Pivot Pin/Roll Pin Install Tool Wheeler AR Pivot Pin/Roll Pin Install Tool

Wheeler Delta Series AR Pivot Pin Install Tool For the AR-15, M4 or M-16. Makes pivot spring and detent work fast and effortless Roll Pin Punch and starter for all lower receiver roll pins Comes with handy key ring for storage Black zinc plated steel

List Price: $8.99
Our Price: $7.99
Savings: $1.00
Wheeler AR Front Sight Tool Wheeler AR Front Sight Tool

The Wheeler Delta Series AR Front Sight Tool is a 4-prong front sight tool is designed to adjust the A2 front sight found on the AR-15, M16, and M4. It is machined from steel and has a black zinc finish to last for years. The key ring serves as a handle and helps keep the small tool accounted for. Install and adjust standard Mil-Spec A2 front sights on AR-15, M16, and M4 Can be used with any ¼” hex driver Key ring for storage serves as a handle also Black zinc plated steel

List Price: $7.99
Our Price: $7.99
Real Avid AR15 Front Sight Adjuster Real Avid AR15 Front Sight Adjuster

This compact, stainless steel tool makes quick sight adjustments a breeze. With durability and ingenuity, the double-ended AR15 Front Sight Adjuster Tool is designed to work on both A1 & A2 front sights, reducing the need to clutter your range bag.

List Price: $9.99
Our Price: $8.99
Savings: $1.00
Tapco Enhanced Stock Wrench Tapco Enhanced Stock Wrench

Tapco, Inc., Enhanced Stock Wrench, Fits AR Rifles, Black

List Price: $11.49
Our Price: $10.99
Savings: $0.50
PM123 Promag AR15 Lower Receiver Vise Block

PM123 This vise block allows the user a “third-hand” to work on and install parts to AR-15/M-16 lower receivers. The vise block is clamped into the users vise, and the block is then inserted into the lower-receiver’s magazine well, and is held in place by the magazine catch. Constructed of a black, injection-molded polymer, for years of service.

MSRP $14.99
Our Price: $12.95
Savings: $2.04
Wheeler Delta Series AR-15 Delta Ring Tool Wheeler Delta Series AR-15 Delta Ring Tool

The AR-15 Delta Ring Tool makes removing mil-spec AR-15 and M16 handguards easy by compressing the Delta Ring with one hand. It is 100% Vinyl coating protects the guns finish from damage but is very durable, and is custom formed wire fits securely around Delta Ring. The Delta Ring Tool has a welded steel bracket for durability even with stuck or broken Delta Rings.

List Price: $15.99
Our Price: $13.99
Savings: $2.00
Wheeler Space-Saver Screwdriver Set Wheeler Space-Saver Screwdriver Set

Less than half the size of comparable gunsmithing screwdriver sets!

The Wheeler® Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. It’s also the perfect size to include on your trips to the range and the field.

Included with the standard, Phillips, hex, and torx bits, is a 2″ long #2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4″ square drive sockets and other attachments.

The magnetic handle is perfectly sized for gunsmithing needs, allowing you to carry a variety of bits if the need should arise.

List Price: $15.99
Our Price: $13.99
Savings: $2.00
Warne RT-1 Range Tool Warne RT-1 Range Tool

Warne’s Range Tool is designed to be the go-to multi-tool for every shooter’s range bag. This compact and durable tool features 12 of the most popular driver bits to perform basic firearm maintenance and scope adjustment in the field. The Warne Range Tool is the next best thing to bringing a gunsmith along.

- Aluminum handle
- Chrome-vanadium steel bits
- Allen head sizes: 0.05″, 1/16″, 5/64″, 3/32″, 1/8″, & 5/32″
- Torx driver sizes: T10, T15, & T20
- Pin remover size: 0.10″
- Flat blade screwdriver
- #2 Phillips head screwdriver

List Price: $19.99
Our Price: $15.99
Savings: $4.00
Real Avid Easy Grip AR15 Handguard Removal Tool Real Avid Easy Grip AR15 Handguard Removal Tool

The name says it all. Ergonomic grips make one handed changing of handguards on AR15s and M16s a breeze. Simply hook to the empty magwell, place the contoured rods around the Delta Ring, squeeze the handles and pull down to compress the Delta Ring. Remove the handguard with your free hand. It’s that simple.

List Price: $17.99
Our Price: $16.99
Savings: $1.00
Lyman Gunsmith 31 Piece Took Kit Lyman Gunsmith 31 Piece Took Kit

Lyman Gunsmith 31 Piece Took Kit

The one screwdriver set that does it all. Lyman's 31 piece gunsmith screwdriver set contains the best selection of bits for working on all firearms. Gunsmith slotted bits for action screws, hex bits to fit the new scope mounting screws and Phillips bits including special long Phillips bits for buttplate and recoil pad removal. A must for the serious shooter. The Gunsmith 31 Piece Tool Kit by Pachmayr gives you a large selection of screwdriver bits - perfect for all your gunsmithing applications.

MSRP $19.98
Our Price: $17.99
Savings: $1.99
Lyman Pistolsmith's Punch Set Lyman Pistolsmith's Punch Set

Lyman Pistolsmith's Punch Set

For the specialized needs of pistol work, Lyman has put together a more economical assortment of punches. This basic set utilizes the same universal handle as the Gunsmith's Set with the following punches: 1/16", 3/32", 1/8", 5/32" and brass drift punch.

MSRP $19.95
Our Price: $17.99
Savings: $1.96
AZ12311 Azoom Snap Caps 12 Gauge 5 pack Blue

Azoom Snap Caps 12 Gauge 5 pack Blue

MSRP $19.98
Our Price: $18.95
Savings: $1.03
AZ12313 Azoom Snap Caps 20 Gauge 5 pack Blue

Azoom Snap Caps 20 Gauge 5 pack Blue

MSRP $19.98
Our Price: $18.95
Savings: $1.03
AZ12322 Azoom Snap Caps 223 Rem10 pack Blue

Azoom Snap Caps 223 Rem10 pack Blue

MSRP $19.98
Our Price: $18.95
Savings: $1.03
Real Avid Micro Tool for AR15 Real Avid Micro Tool for AR15

The last thing anyone wants is to get to the range and have a glitch keep you from making it rain brass. Whether it’s adjustments sighting in, tearing down or scraping carbon from a sticky bolt, this little wonder can save the day.

List Price: $19.99
Our Price: $18.95
Savings: $1.04
Real Avid AR15 Scraper Tool Real Avid AR15 Scraper Tool

Carbon is the enemy of black guns. Regular use quickly builds up carbon on bolts and ring pins. The moving parts on an AR15 require a precision-scraping solution, so we developed The AR15 Scraper—the first scraper designed to clean 12 critical surfaces on the bolt carrier group. The innovative, double-ended swivel design saves time by removing carbon quickly and easily from the entire bolt carrier group. Carbon just ran out of places to hide.

List Price: $19.99
Our Price: $18.99
Savings: $1.00
Delta Series AR-15 Mag Well Vise Block Delta Series AR-15 Mag Well Vise Block

The Delta Series AR-15 Mag Well Vise Block is quite possibly the handiest tool an AR-15 owner could ask for.  Designed for use with the Tipton® Best Gun ViseTM, this center support slides into the magazine well and provides a steady base for cleaning or light gunsmithing on your AR-15, in either breech or closed position.  Users without a Best Gun Vise can mount the Mag Well Vise Block directly to their bench top with the included fasteners.  Loaded with handy features, this tool is a must have for anyone with an AR-15. Patent Pending Supports AR-15 for cleaning & light gunsmithing operations Designed for use with Tipton® Best Gun ViseTM, mounts to center rail with included fasteners Also designed to mount to your bench top, with the included fasteners Innovative bolt service station locks bolt in for servicing extractor pin Center section rotates 180° (in 7° increments) and locks into place at desired location Locks into place using magazine lock on your receiver Built-in hammer stop prevents damage to lower receiver Solvent-resistant polymer provides durability and is non-marring to surfaces Mag well arm is removable for clamping in a bench vise when additional rigidity is required

List Price: $21.99
Our Price: $18.99
Savings: $3.00
Wheeler Precision Micro Screwdriver Set Wheeler Precision Micro Screwdriver Set

The Wheeler Engineering® Precision Micro Screwdriver Set features high quality, chrome plated steel bits to hold up to heavy use and the comprehensive 58 piece set meet all of your precision screwdriver needs. The set include a handle that extends from 3-¾” to 5-½” and a 5-¾” flexible extension shaft to get you into those hard to reach places. The set comes organized with individual bit markings and a convenient carry/storage case. All bits are precision formed for maximum fastener engagement. Chrome plated steel bits Extendible Handle from 3-¾” to 5-½” 5-¾” flexible extension shaft 58 piece set Organized carry/storage case

List Price: $25.99
Our Price: $20.99
Savings: $5.00
Wheeler Carbon Multi-Scraper Wheeler Carbon Multi-Scraper

Product Description Do not let carbon build-up effect your next shoot, get the Wheeler Delta Series Carbon Multi-Scraper. This stainless steel coated, compact tool is made to clean 11 vital surfaces of the bolt carrier group. Keep this tool in your gun room, or take advantage of its convenient size by storing it inside your rifle’s pistol grip so you always have it on hand. This is the perfect tool for getting you back to shooting quickly and effectively.

- Cleans 11 surfaces of the bolt carrier group
- Fits inside AR pistol grips
- Coated stainless steel
- Features a cam pin scraper, large diameter firing pin scraper, bolt face scraper, cotter pin removal tool, boat tool shoulder scraper, small diameter firing pin scraper, bolt lug scraper, bolt tail scraper, interior BCG scraper and bolt waist scraper

List Price: $23.99
Our Price: $21.99
Savings: $2.00
15313 Azoom Snap Caps 380 ACP 10 pack Blue

Azoom Snap Caps 380 ACP 10 pack Blue

MSRP $23.98
Our Price: $22.95
Savings: $1.03
15316 Azoom Snap Caps 9MM 10 pack Blue

Azoom Snap Caps 9MM 10 pack Blue

MSRP $23.98
Our Price: $22.95
Savings: $1.03
Real Avid Gun Tool Real Avid Gun Tool

We set out to make a gun-specific multi-tool and ended up creating an entire category. This gun tool was designed for those “Oh, crap” moments – when problems strike and they need to be fixed fast. The Gun Tool can change choke tubes, mount and adjust scopes, tighten screws and break down actions. No matter where a problem with a gun happens – in the field, at the range or workbench – count on The Gun Tool to fix it.

List Price: $24.99
Our Price: $22.95
Savings: $2.04
15314 Azoom Snap Caps 40 S&W 10 pack Blue

Azoom Snap Caps 40 S&W 10 pack Blue

MSRP $25.98
Our Price: $24.95
Savings: $1.03
Wheeler Multi-Driver Tool Pen with Aluminum Handle Wheeler Multi-Driver Tool Pen with Aluminum Handle

Have the bits you need, on hand, with the Wheeler Multi-Driver Tool Pen. Its convenient shape fits comfortably in your hand and is equipped to hold 6 of your most used bits. The aluminum constructed handle keeps the bits internally and can be changed quickly, by simply pulling the bit out of the exposed end and pushing it through the top of the handle. This tool also comes with a bit holder to conveniently store up to 7 unused bits.

- Aluminum construction handle that holds 6 bits internally
- Hex and SAE (H5/64, H3/32, H1/8, H5/32)
- Slotted (SL3, SL4, SL4.5)
- Phillips (PH1, PH2)
- Torx (T10, T15, T20, T25)

List Price: $29.99
Our Price: $26.99
Savings: $3.00
Wheeler Roll Pin Punch Set Wheeler Roll Pin Punch Set

The Wheeler Engineering® Roll Pin Punch set is machined from hardened steel to prevent bending or breaking while driving any size roll pin. The punches are designed with a hemispherical tip to provide proper alignment of the roll pin to prevent damage to the firearm and the roll pin. The 9 piece set includes: 5/16″, 1/4″, 7/32″, 3/16″, 5/32″, 1/8″, 3/32″, 5/64″, 1/16″ punches in a nylon pouch.

- 9-piece set 1/16″ through 5/16″
- Hardened Steel construction
- Hemispherical Tip
- Fitted Nylon Storage Pouch

List Price: $27.99
Our Price: $26.99
Savings: $1.00
Real Avid Smart Fit AR15 Vise Block Real Avid Smart Fit AR15 Vise Block

No more customizing static blocks, the revolutionary design of the Smart Fit™ Vise Block adjusts to fit every AR15 magazine well out there. The Smart Fit™ allows you to work on your lower receiver with a solid foundation for changing out buffer tubes or fixed stock receiver extensions. Insert the block into the magazine well and simply rotate the adjustment handle to tighten the fit. This block can also be used with an inverted lower receiver to work on pistol grips or allow easy access to the underside of your AR15. The included Pivot Lock holds the gun open giving you access to the chamber and barrel for easy cleaning.

List Price: $29.99
Our Price: $28.99
Savings: $1.00
Real Avid AR15 Carbon Boss Multi Tool Real Avid AR15 Carbon Boss Multi Tool

This is the most comprehensive carbon removal multi-tool ever built. Extremely versatile, it has 12 precision surfaces to clean the most critical parts of your bolt, bolt carrier, cam pin, and firing pin. It also includes a cotter pin puller, a replaceable rotating hybrid SMART BRUSH™, and an imbedded bolt tail detailing brush. It’s the enemy of your AR15’s worst enemy.

List Price: $29.99
Our Price: $28.99
Savings: $1.00
UTG AR15/AR308 Armorer's Multi-Function Combo Wrench UTG AR15/AR308 Armorer's Multi-Function Combo Wrench

• Provides the Means to Install and Remove Parts Often Replaced and or Reinstalled on Both the AR15 and AR308 Platforms such as: Standard A2 Flash Hider, Delta Ring Assembly, Rifle Length Buffer Tube, Carbine Buffer Tube Castle Nut, and More
• Equipped with UTG PRO Super Slim Free Float Barrel Nut Wrench and Compatible with 1/2" Torque Wrenches
• Includes a 3/4", 7/8", and 3-Prong Wrench Slot for Installation and Removal of Most Muzzle Devices and 3 Prong Flash Hiders
• Includes a 5/8" Wrench Slot and Flathead Screw Driver for Installation and Removal of Rifle Length Buffer Tubes and Fixed A2 Stocks, as well as, a castle and jam nut wrench
• Steel Construction with Wear Resistant Phosphate Finish for Long Lasting Durability

List Price: $34.97
Our Price: $31.97
Savings: $3.00
Wheeler Delta Series Compact Multi-Tool Wheeler Delta Series Compact Multi-Tool

There is no longer a need for a tool box at the range when you have the Wheeler Delta Series Compact Multi-Tool. With a satin finish and stainless steel construction, this tool is not only handy, but durable. The multi-tool design can be used to perform many different functions in the field or at the range. When you need to make adjustments to your rifle, or scrape some carbon build-up, simply reach down and grab this all in one tool out of the included nylon belt sheath and go to work. After you are finished, snap the tool back in and continue shooting.

- Fits compact into nylon belt sheath (included)
- Multi-tool design to perform many different functions in the field
- Satin-finish, stainless steel construction
- Features an AR Carbon Multi-Scraper Tool, 5/64″ Hex, 7/64″ Hex, 1/8″ Hex, Pivot and takedown punch, #2 Phillips, bolt waist scraper, interior BCG scraper, T10 Torx, T15 Torx, T20 Torx, A2 front sight tool, 3/16″ Flat, 3/4″ Wrench, 1/2″ Wrench and a castle nut wrench

List Price: $35.99
Our Price: $31.99
Savings: $4.00