Home > Manufacturers > Wheeler

Wheeler Products for Sale at Northern Rifleman

Sort By:
Page of 1
156437 Wheeler AR Front Sight Tool

The Wheeler Delta Series AR Front Sight Tool is a 4-prong front sight tool is designed to adjust the A2 front sight found on the AR-15, M16, and M4. It is machined from steel and has a black zinc finish to last for years. The key ring serves as a handle and helps keep the small tool accounted for. Install and adjust standard Mil-Spec A2 front sights on AR-15, M16, and M4 Can be used with any ¼” hex driver Key ring for storage serves as a handle also Black zinc plated steel

MSRP $7.99
Our Price: $5.95
Savings: $2.04
156243 Wheeler AR Pivot Pin/Roll Pin Install Tool

Wheeler Delta Series AR Pivot Pin Install Tool For the AR-15, M4 or M-16. Makes pivot spring and detent work fast and effortless Roll Pin Punch and starter for all lower receiver roll pins Comes with handy key ring for storage Black zinc plated steel

MSRP $8.99
Our Price: $6.50
Savings: $2.49
209943 Wheeler Delta Series AR-15 Delta Ring Tool

The AR-15 Delta Ring Tool makes removing mil-spec AR-15 and M16 handguards easy by compressing the Delta Ring with one hand. It is 100% Vinyl coating protects the guns finish from damage but is very durable, and is custom formed wire fits securely around Delta Ring. The Delta Ring Tool has a welded steel bracket for durability even with stuck or broken Delta Rings.

MSRP $15.99
Our Price: $12.25
Savings: $3.74
664-507 Wheeler Space-Saver Screwdriver Set

Less than half the size of comparable gunsmithing screwdriver sets!

The Wheeler® Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. It’s also the perfect size to include on your trips to the range and the field.

Included with the standard, Phillips, hex, and torx bits, is a 2″ long #2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4″ square drive sockets and other attachments.

The magnetic handle is perfectly sized for gunsmithing needs, allowing you to carry a variety of bits if the need should arise.

MSRP $15.99
Our Price: $12.95
Savings: $3.04
156211 Delta Series AR-15 Mag Well Vise Block

The Delta Series AR-15 Mag Well Vise Block is quite possibly the handiest tool an AR-15 owner could ask for.  Designed for use with the Tipton® Best Gun ViseTM, this center support slides into the magazine well and provides a steady base for cleaning or light gunsmithing on your AR-15, in either breech or closed position.  Users without a Best Gun Vise can mount the Mag Well Vise Block directly to their bench top with the included fasteners.  Loaded with handy features, this tool is a must have for anyone with an AR-15. Patent Pending Supports AR-15 for cleaning & light gunsmithing operations Designed for use with Tipton® Best Gun ViseTM, mounts to center rail with included fasteners Also designed to mount to your bench top, with the included fasteners Innovative bolt service station locks bolt in for servicing extractor pin Center section rotates 180° (in 7° increments) and locks into place at desired location Locks into place using magazine lock on your receiver Built-in hammer stop prevents damage to lower receiver Solvent-resistant polymer provides durability and is non-marring to surfaces Mag well arm is removable for clamping in a bench vise when additional rigidity is required

MSRP $21.99
Our Price: $16.95
Savings: $5.04
1078195 Wheeler Carbon Multi-Scraper

Product Description Do not let carbon build-up effect your next shoot, get the Wheeler Delta Series Carbon Multi-Scraper. This stainless steel coated, compact tool is made to clean 11 vital surfaces of the bolt carrier group. Keep this tool in your gun room, or take advantage of its convenient size by storing it inside your rifle’s pistol grip so you always have it on hand. This is the perfect tool for getting you back to shooting quickly and effectively.

- Cleans 11 surfaces of the bolt carrier group
- Fits inside AR pistol grips
- Coated stainless steel
- Features a cam pin scraper, large diameter firing pin scraper, bolt face scraper, cotter pin removal tool, boat tool shoulder scraper, small diameter firing pin scraper, bolt lug scraper, bolt tail scraper, interior BCG scraper and bolt waist scraper

MSRP $23.99
Our Price: $19.25
Savings: $4.74
564018 Wheeler Precision Micro Screwdriver Set

The Wheeler Engineering® Precision Micro Screwdriver Set features high quality, chrome plated steel bits to hold up to heavy use and the comprehensive 58 piece set meet all of your precision screwdriver needs. The set include a handle that extends from 3-¾” to 5-½” and a 5-¾” flexible extension shaft to get you into those hard to reach places. The set comes organized with individual bit markings and a convenient carry/storage case. All bits are precision formed for maximum fastener engagement. Chrome plated steel bits Extendible Handle from 3-¾” to 5-½” 5-¾” flexible extension shaft 58 piece set Organized carry/storage case

MSRP $25.99
Our Price: $20.50
Savings: $5.49
1082256 Wheeler Multi-Driver Tool Pen with Aluminum Handle

Have the bits you need, on hand, with the Wheeler Multi-Driver Tool Pen. Its convenient shape fits comfortably in your hand and is equipped to hold 6 of your most used bits. The aluminum constructed handle keeps the bits internally and can be changed quickly, by simply pulling the bit out of the exposed end and pushing it through the top of the handle. This tool also comes with a bit holder to conveniently store up to 7 unused bits.

- Aluminum construction handle that holds 6 bits internally
- Hex and SAE (H5/64, H3/32, H1/8, H5/32)
- Slotted (SL3, SL4, SL4.5)
- Phillips (PH1, PH2)
- Torx (T10, T15, T20, T25)

MSRP $29.99
Our Price: $20.75
Savings: $9.24
204513 Wheeler Roll Pin Punch Set

The Wheeler Engineering® Roll Pin Punch set is machined from hardened steel to prevent bending or breaking while driving any size roll pin. The punches are designed with a hemispherical tip to provide proper alignment of the roll pin to prevent damage to the firearm and the roll pin. The 9 piece set includes: 5/16″, 1/4″, 7/32″, 3/16″, 5/32″, 1/8″, 3/32″, 5/64″, 1/16″ punches in a nylon pouch.

- 9-piece set 1/16″ through 5/16″
- Hardened Steel construction
- Hemispherical Tip
- Fitted Nylon Storage Pouch

MSRP $27.99
Our Price: $22.50
Savings: $5.49
156444 Wheeler Delta AR-15 Upper Vise Clamp

The Delta Series AR-15 Upper Vise Block is optimized for left hand and right hand Mil Spec A2 upper receivers with carry handles, as well as flattop style receivers. Other AR-15 variants may be adapted with special attention to potentially non-conforming surfaces or features. The Block allows you to safely clamp on to your AR-15 upper receiver in a vise holding it securely without twisting, crushing or marring the finish. This block is the perfect product for torquing a barrel on, removing a stubborn barrel nut or for simple gun maintenance and cleaning. It is made of a high pressure, solvent resistant polymer material which can withstand almost anything you can throw at it. The Delta Series AR-15 Upper Vise Block truly is the all-around product for your AR-15 gunsmithing, maintenance or cleaning needs. As an added bonus it includes a receiver insert with a gas tube alignment system, making sure your gas tube is always in line when installing a barrel and torquing a barrel nut.

Features and Specifications:
- Fits left and right-hand Mil Spec A2 upper, as well as flat top receivers
- Receiver insert with gas tube aligner included
- Durable design holds receiver securely
- Manufacturer Item #: 156444

MSRP $31.99
Our Price: $24.95
Savings: $7.04
156999 Wheeler Delta Series AR Combo Tool

The Wheeler Delta Series AR Combo Tool will cover most of your AR-15 service needs with a single tool.  An innovative layered and laminated stamped steel construction makes the Delta Series Combo Tool the most durable AR tool available. This construction method allows the use of hardened steel barrel nut pins designed to hold up to heavy torque requirements. A cut out for a ½” drive allows the tool to be used with a torque wrench or ratchet driver. Profiles for buffer tube lock nut and flash hider are included. The addition of a bit driver and bit holder with six common bits adds to the versatility.

MSRP $33.99
Our Price: $27.25
Savings: $6.74
1078948 Wheeler Delta Series Compact Multi-Tool

There is no longer a need for a tool box at the range when you have the Wheeler Delta Series Compact Multi-Tool. With a satin finish and stainless steel construction, this tool is not only handy, but durable. The multi-tool design can be used to perform many different functions in the field or at the range. When you need to make adjustments to your rifle, or scrape some carbon build-up, simply reach down and grab this all in one tool out of the included nylon belt sheath and go to work. After you are finished, snap the tool back in and continue shooting.

- Fits compact into nylon belt sheath (included)
- Multi-tool design to perform many different functions in the field
- Satin-finish, stainless steel construction
- Features an AR Carbon Multi-Scraper Tool, 5/64″ Hex, 7/64″ Hex, 1/8″ Hex, Pivot and takedown punch, #2 Phillips, bolt waist scraper, interior BCG scraper, T10 Torx, T15 Torx, T20 Torx, A2 front sight tool, 3/16″ Flat, 3/4″ Wrench, 1/2″ Wrench and a castle nut wrench

MSRP $35.99
Our Price: $28.95
Savings: $7.04
1079898 Wheeler Gas Block Taper Pin Removal Tool

Take full control of your custom build with the Wheeler Gas Block Taper Pin Removal Tool. Whether you have a vise, or just a ball pin hammer, the Support Block, paired with the starter and finishing punches, makes removing A2 style gas blocks quick and easy. Built with durable tool steel, this is a must-have for any gunsmithing or tactical rifle owners work bench.

- Works on A2 front sights
- Works on Smith & Wesson single-taper pin gas blocks
- Works on dual taper pins Durable tool steel
- Features a finishing punch and a starter punch

MSRP $35.99
Our Price: $28.95
Savings: $7.04
1081959 Wheeler 45 Piece SAE/Metric Hex and Torx Key Set

Store all your key sets in one place with the Wheeler 45-Piece Key Set. This compact set takes up little space on your workbench and will allow for you to store all SAE, Metric Hex and Torx Keys together. Never again will you have to dig around for odd or different sizes, simply open your kit, turn to the page you need and continue working.

- SAE Hex (.028″, .035″, .05″, 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16″, 3/8″)
- Metric Hex (.7mm, .9mm, 1.3mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm)
- Torx (T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20, T25, T30, T35)

MSRP $37.99
Our Price: $30.50
Savings: $7.49
1081958 Wheeler 55 Piece SAE/Metric Hex and Torx Screwdriver Set

Complete your tool arsenal with the Wheeler 55-Piece Hex and Torx Screwdriver Set. This set includes all of the most common bits, one fourth inch driver handle, one 4 mm driver handle, and comes in a convenient case for safe storage.

- SAE Hex (.028″, .035″, .05″, 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16″, 3/8″)
- Metric Hex (.7mm, .9mm, 1.3mm, 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm)
- Torx (T1, T2, T3, T4, TT5, TT6, TT7, TT8, TT9, TT10, TT15, TT20, TT25, TT30, TT35, TT40, TT45, TT50)

MSRP $44.99
Our Price: $36.25
Savings: $8.74
156888 Delta Series AR Upper / Pic Rail Vise Block

This innovative AR vise block is designed to securely hold basically any AR upper receiver. It will secure AR-15 uppers by engaging the takedown lugs on the bottom of the receiver. By reversing the direction it will secure most AR-10 style uppers in the same manner. In addition it will secure any Pic Rail on a hi-rise, standard flat top or many other integrated rail guns by sliding onto and clamping the rail. The durable machined aluminum construction and precise tolerances ensure a secure hold essential for removal and installation of stubborn barrel nuts as well as a variety of other tasks.  Multi-function design holds AR-15 and AR-10 uppers Can secure any Pic-Rail receiver by clamping the rail Durable extruded and machined aluminum construction

MSRP $47.99
Our Price: $38.50
Savings: $9.49
1081957 Wheeler 30 Piece SAE/Metric Hex and Torx P-Handle Set

Complete your workbench with the Wheeler 30-Piece P-Handle Driver Set. The sleek molded stand design paired with its ability to be mounted on the wall allow for quick, convenient access to the SAE Hex, Metric Hex and Torx drivers. This screwdriver set is the perfect addition to any workshop.

- Molded stand can sit on bench top or has mounting holes on back for hanging SAE Hex (3/32″, 7/61″, 1/8″ ball, 9/64″ ball, 5/32″ ball, 3/16″ ball, 7/32″ ball, 1/4″ ball, 5/16″ ball, 3/8″ ball)
- Metric Hex (1.5mm, 2mm ball, 2.5mm ball, 3mm ball, 4mm ball, 5mm ball, 6mm ball, 7mm ball, 8mm ball, 10mm ball)
- Torx (T7, T8, T9, T10, T15, T20, T25, T27, T30, T40

MSRP $63.99
Our Price: $51.50
Savings: $12.49
156224 Wheeler AR Armorers Vise Block Tool

The AR-15 platform has become the mainstay of today’s Modern Sporting Rifle market. The popularity and modularity of this platform has created the need for specific tools that allow users to build, maintain and reconfigure AR’s. The Delta Series Armorer’s Vise provides users an ideal foundation for all AR tasks. The integrated mag well insert securely engages the lower receiver and adjusts in angle to accommodate any task. The innovative front support is angle adjustable, allowing the barrel portion of the upper or a forend portion to be secured in its tapered profile. Both front and rear supports have multiple positions in the base and are reversible for maximum customization. The base is constructed of rigid steel with non-slip rubber feet. Feet can be removed for permanent bench-top mounting as well. Depressions formed into the base keep spare parts or tools contained. Additional features in the mag well insert include a hammer stop and a bolt service station that secures the bolt face for disassembly/assembly. The vice works great for assembled guns in closed or break open state, but also is ideal for holding a lower receiver only, for assembly and maintenance. Whether you are building an AR from the ground up or just looking for the ideal cleaning vise the AR Armorer’s Vise is the way to go. This highly adjustable vise delivers a solid work platform ideal for cleaning, maintenance, and gunsmithing.

List Price: $64.99
Our Price: $52.25
Savings: $12.74
553-556 Wheeler Fat Torque Wrench with 10 Bits

Wheeler’s FAT Wrench® brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, accurate torque settings to scope rings, guard screws and other screws, which aids in accuracy and decreases the opportunity for problems in the field. The FAT Wrench is a perfect compliment to the Deluxe Gunsmithing Screwdriver Sets. Together, they can ensure accurate tightening of most every screw on any gun in your collection.

List Price: $66.99
Our Price: $53.75
Savings: $13.24
562-194 Wheeler 89 Piece Professional Gunsmithing Screwdriver Set

Screwdrivers are the most important and most-used gunsmithing tools. Wheeler’s® Deluxe Gunsmithing Screwdriver Set is the kit that belongs on every gunsmithing bench – the well thought-out bit selection will put an end to burred, buggered, busted up screw slots on any gun that comes your way. The bits make up the heart of any screwdriver set, and Wheeler’s are the finest available. They’re made from S2 tool steel and hardened to 56-58 Rockwell “C.” Unlike other screwdriver suppliers,Wheeler’s engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation.

Keep your gun looking and operating as good as new!

Avoid costly damage that ruins the look and value of your guns!

Whether you’re working on a Browning® Superposed, a Remington 700®, a Smith & Wesson® revolver, or a Colt® Single Action, you’ll find that there’s a bit to fit every screw on your gun. The 54 Hollow-ground flat bits range in size from .120″x.020″ to .360″x.070″, and includes doubles in the thinnest sizes. (Any gunsmith will tell you that you’re occasionally going to break the ultra-thin bits on stubborn screws. This set includes two each of the very thinnest bits, which means you’ll never be stuck in the middle of a job without the proper bit. Replacement bits are available in three packs for a very modest price.)

The set also includes a complete selection of Phillips, Allen, and Torx bits to cover scope rings, bases, recoil pads, and the like. The difference in the “basic set” and the “professional set” lies in the 15 ingenious “specialty bits” that are included in the “professional” set. These 15 pieces include all of the bits pictured below. These bits are great for installing scope bases, getting you out of a pinch by providing a small pin punch when you really need it, and keeping once-in-a-while lifesaver tools at your fingertips.

Set come with two handles made from comfortable overmolded plastic. The first is a regular size handle that’s good for most jobs, and the second is a slimmer, shorter “Close Quarters” handle that is good for finesse work with smaller bits.

MSRP $89.99
Our Price: $71.95
Savings: $18.04