Home > Firearms > Sig Accessories
Sort By:
Page of 2
S228 X Grip Magazine Spacer Sig Sauer P228/9 9MM

The patented X-GRIP P228, P229, M11 adapts the high capacity SIG P226 magazine for use in the P228, P229, M11 pistols, incorporating the larger magazine into the compact pistol's grip, increasing the gun's capacity to 15 or 17 rounds.

MSRP $19.95
Our Price: $15.95
Online Sale Price $15.95
Savings: $4.00
SC250C X Grip Magazine Spacer Sig Sauer P250 Compact

The XGRIP XGS320/250C adapts the full size SIG SAUER P320/250 magazine for use in the P320/250C pistols, incorporating the larger magazine into the compact pistol’s grip, increasing the gun’s capacity. Law enforcement and military personnel can carry the P320/250C with a standard magazine when concealment is important, then insert the high capacity full size P320/250 magazine with XGRIP when firepower and capacity become critical.

MSRP $19.95
Our Price: $15.95
Online Sale Price $15.95
Savings: $4.00
20000 Hogue Grip Sig P220 American Finger Grove Black

ATTENTION P220 E2 Owners: Our Hogue P220 rubber grips will fit the E2 style frames. However, you will need to purchase the 4 required grip screws separately. You may also need to purchase standard lock washers to prevent magazine interference. Hogue does not offer lock washers for purchase. Hogue rubber grips are molded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel without affecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene resulting in a much superior grip. The flexibility of our materials and molding process has allowed us to produce rubber grips with features that out perform all other makes.

Hogue Grip Sig P220 American Finger Grove Black

MSRP $26.95
Our Price: $21.56
Online Sale Price $21.56
Savings: $5.39
20010 Hogue Grip Sig P220 American no Finger Grove Black

ATTENTION P220 E2 Owners: Our Hogue P220 rubber grips will fit the E2 style frames. However, you will need to purchase the 4 required grip screws separately. You may also need to purchase standard lock washers to prevent magazine interference. Hogue does not offer lock washers for purchase. Hogue rubber grips are molded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel without affecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene resulting in a much superior grip. The flexibility of our materials and molding process has allowed us to produce rubber grips with features that out perform all other makes.

Hogue Grip Sig P220 American no Finger Grove Black

MSRP $26.95
Our Price: $21.56
Online Sale Price $21.56
Savings: $5.39
26000 Hogue Rubber Grip Sig P226 Finger Grove Black

- Fits both DA/SA models with decocker lever, AND DAK models without decocker lever and hammer spur.
- Fits 9mm, 357SIG or .40 cal pistols
- Will fit the P226 MK25
- Will fit the P226 E2. Remove the E2 grips to expose the screw holes. You must purchase grips screws in addition to the new grips. This retrofits the 226 E2 back to standard 226 grip dimensions.

- Will NOT fit the Allround models.
- Will NOT fit the 226 Legion. Controls were made to hug tighter to the frame than standard 226 models. The slide release will not function on the Legion with Hogue grips installed.

- For optimum performance of an older SIG P226 with Hogue Grips it is recommended that the the trigger return spring be replaced with the "new" style spring which is available from SIG. SIG redesigned the 226 frame in the mid-1990s and the new pistols come with a redesigned trigger return spring. SIG encourages the use of this new spring on older guns.

- Grip screws should be torqued to 13-15 inch lbs. Blue loctite is suggested on the threads.

Hogue Rubber Grip Sig P226 Finger Grove Black

MSRP $26.95
Our Price: $21.56
Online Sale Price $21.56
Savings: $5.39
26010 Hogue Rubber Grip Sig P226 no Finger Grove Black

- Fits both DA/SA models with decocker lever, AND DAK models without decocker lever and hammer spur. -
Fits 9mm, 357SIG or .40 cal pistols
- Will fit the P226 MK25
- Will fit the P226 E2. Remove the E2 grips to expose the screw holes. You must purchase grips screws in addition to the new grips. This retrofits the 226 E2 back to standard 226 grip dimensions.

- Will NOT fit the Allround models.
- Will NOT fit the 226 Legion. Controls were made to hug tighter to the frame than standard 226 models. The slide release will not function on the Legion with Hogue grips installed.

- For optimum performance of an older SIG P226 with Hogue Grips it is recommended that the the trigger return spring be replaced with the "new" style spring which is available from SIG. SIG redesigned the 226 frame in the mid-1990s and the new pistols come with a redesigned trigger return spring. SIG encourages the use of this new spring on older guns.

- Grip screws should be torqued to 13-15 inch lbs. Blue loctite is suggested on the threads.

Hogue Rubber Grip Sig P226 no Finger Grove Black

MSRP $26.95
Our Price: $21.56
Online Sale Price $21.56
Savings: $5.39
28000 Hogue Grip Sig P228/229 Finger Grove Black

Will Fit:
• 9mm, .40S&W, .357SIG calibers
• DA/SA and DAK style frames
• P228
• P229
• P229S
• P229 SAS
• M11-A1
• P228 and P229 E2. Remove the E2 grips to expose the screw holes. You must purchase grips screws in addition to the new grips. This retrofits the E2 back to standard P228/229 grip dimensions.

Will NOT Fit:
• Legion series pistols
• P229 Carry

Grip screws should be torqued to 13-15 in/lbs.

Hogue Grip Sig P228/229 Finger Grove Black

MSRP $26.95
Our Price: $21.56
Online Sale Price $21.56
Savings: $5.39
28010 Hogue Grip Sig P228/229 no Finger Grove Black

Will Fit:
• 9mm, .40S&W, .357SIG calibers
• DA/SA and DAK style frames
• P228
• P229
• P229S
• P229 SAS
• M11-A1
• P228 and P229 E2. Remove the E2 grips to expose the screw holes. You must purchase grips screws in addition to the new grips. This retrofits the E2 back to standard P228/229 grip dimensions.

Will NOT Fit:
• Legion series pistols
• P229 Carry

Grip screws should be torqued to 13-15 in/lbs.

Hogue Grip Sig P228/229 no Finger Grove Black

MSRP $26.95
Our Price: $21.56
Online Sale Price $21.56
Savings: $5.39
38000 Hogue Grip Sig P238 Rubber Finger Grove Black

Hogue rubber grips are molded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel without affecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene resulting in a much superior grip. The flexibility of our materials and molding process has allowed us to produce rubber grips with features that out perform all other makes.

Hogue Grip Sig P238 Rubber Finger Grove Black

MSRP $26.95
Our Price: $21.56
Online Sale Price $21.56
Savings: $5.39
GRIP-MOD-C-45-SM-BLK Sig Sauer Grip Module P320C 45ACP Small Black

MODEL P250 / P320
CALIBER 45 ACP
FRAME SIZE Compact
GRIP SIZE Small
COLOR Black

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in .45ACP with a grip size of your choice. Requires the .45ACP slide and barrel.

MSRP $39.00
Our Price: $36.95
Online Sale Price $36.95
Savings: $2.05
GRIP-MOD-SCR-943-M-B Sig Sauer Grip Module P320SC 9/40 Medium Railed

MODEL P250 / P320
CALIBER 9 mm / 40 S&W /.357 Sig
FRAME SIZE Sub Compact
GRIP SIZE Small
COLOR Black

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel.

MSRP $39.00
Our Price: $36.95
Online Sale Price $36.95
Savings: $2.05
GRIP-MOD-C-943-LG-BLK Sig Sauer Grip Mod P320C 9/40 Large Black

MODEL P250 / P320
CALIBER 9 mm / 40 S&W /.357 Sig
FRAME SIZE Compact
GRIP SIZE Large
COLOR Black

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel.

MSRP $39.00
Our Price: $39.99
Online Sale Price $39.99
GRIP-MOD-C-943-M-FDE Sig Sauer Grip Mod P320C 9/40 Medium Flat Dark Earth

MODEL P250 / P320
CALIBER 9 mm / 40 S&W /.357 Sig
FRAME SIZE Compact
GRIP SIZE Large
COLOR Flat Dark Earth

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel.

MSRP $44.00
Our Price: $39.99
Online Sale Price $39.99
Savings: $4.01
GRIP-MOD-C-943-SM-BLK Sig Sauer Grip Mod P320C 9/40 Small Black

MODEL P250 / P320
CALIBER 9 mm / 40 S&W /.357 Sig
FRAME SIZE Compact
GRIP SIZE Small
COLOR Black

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel.

MSRP $39.00
Our Price: $39.99
Online Sale Price $39.99
GRIP-MOD-C-943-SM-FDE Sig Sauer Grip Mod P320C 9/40 Small Flat Dark Earth

MODEL P250 / P320
CALIBER 9 mm / 40 S&W /.357 Sig
FRAME SIZE Compact
GRIP SIZE Small
COLOR Flat Dark Earth

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel.

MSRP $44.00
Our Price: $39.99
Online Sale Price $39.99
Savings: $4.01
GRIP-MOD-F-45-LG-BLK Sig Sauer Grip Mod P320F 9/40 Large Black

MODEL P250 / P320
CALIBER 9 mm / 40 S&W /.357 Sig
FRAME SIZE Full
GRIP SIZE Large
COLOR Black

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel.

MSRP $39.00
Our Price: $39.99
Online Sale Price $39.99
GRIP-MOD-F-943-SM-BLK Sig Sauer Grip Mod P320F 9/40 Small Black

MODEL P250 / P320
CALIBER 9 mm / 40 S&W /.357 Sig
FRAME SIZE Full
GRIP SIZE Small
COLOR Black

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel.

MSRP $39.00
Our Price: $39.99
Online Sale Price $39.99
GRIP-MOD-SC-943-SM-BLK Sig Sauer Grip Mod P320SC 9/40 Small Black

MODEL P250 / P320
CALIBER 9 mm / 40 S&W /.357 Sig
FRAME SIZE Sub Compact
GRIP SIZE Small
COLOR Black

note: Small frame does not include a rail.

Install your P320/P250 firing control unit into this Grip Module Assembly to convert to a P320 or P250 compact chambered in 9mm, .357 SIG, .40AUTO with your selected grip size. Requires the 9mm, .357 SIG and .40AUTO slide and barrel.

MSRP $39.00
Our Price: $39.99
Online Sale Price $39.99
38137-BLKGRY Hogue Grip Piranha G10 Sig 238 Black Gray

G10 grips are precision machined from the highest quality G10 material available to exacting specifications. G10 is a high-pressure thermoset plastic laminate consisting of multiple layers of woven fiberglass mesh cloth impregnated with an epoxy resin binder. It can be produced with many layers of the same color, or different colors to achieve a specific cosmetic look. Typical G10 is made of only flat layers. Hogue Inc. has a new patented method of producing G10 material called G-Mascus®. This method produces different patterns within the colored material which produces a unique look. Grips made in this style take on a similar look to Damascus steel, hence the name G-Mascus. Our G10 grips are designed for a lifetime of use.

Hogue Grip Piranha G10 Sig 238 Black Gray

MSRP $49.95
Our Price: $42.46
Online Sale Price $42.46
Savings: $7.49
APX112-025 Apex Sig Sauer P320 Enhancement Trigger

The Apex Flat-Faced Action Enhancement Trigger for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory curved trigger and is easily installed without the need for tools or fixtures. The flat design increases trigger reach to the natural resting position of the shooter’s finger and allows the shooter to position their finger lower on the trigger face to take advantage of the increased leverage. Machined from billet steel.

– Direct drop-in replacement of factory curved trigger
– No tools required for installation
– Reduces trigger pull weigh by approx. 18% (8.0 lbs to 6.5 lbs, as tested)
– In X-Series models, due to leverage, pull weight will increase approx. 6%, while overall travel reduces 10%
– Maintains factory drop safety values

MSRP $44.95
Our Price: $42.70
Online Sale Price $42.70
Savings: $2.25
APX112-026 Apex Sig Sauer P320 Advanced Flat Trigger

The Apex Flat Advanced Trigger for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory curved trigger and reduces the trigger pull weight by approximately 35%. The flat design increases trigger reach to the natural resting position of the shooter’s finger and allows the shooter to position their finger lower on the trigger face to take advantage of the increased leverage. The trigger is easily installed without the need for tools or fixtures. Machined from billet steel.

– Direct drop-in replacement of factory curved trigger
– Reduces trigger pull weight by approximately 35%
– In X-Series models, reduces pull weight by approximately 10% and overall travel 15%
– No tools required for installation
– Maintains factory drop safety values

MSRP $49.95
Our Price: $47.45
Online Sale Price $47.45
Savings: $2.50
APX112-027 Apex Sig Sauer P320 Advanced Curved Trigger

The Apex Curved Advanced Trigger for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory curved trigger and reduces the trigger pull weight by approximately 35%. The trigger is easily installed without the need for tools or fixtures. Machined from billet steel.

– Direct drop-in replacement of factory curved trigger
– Reduces trigger pull weight by approximately 35%
– In X-Series models, reduces pull weight by approximately 10% and overall travel 15%
– No tools required for installation
– Maintains factory drop safety values

MSRP $49.95
Our Price: $47.45
Online Sale Price $47.45
Savings: $2.50
79570 Hogue Grip Blackhawk/Vaquero Ivory White

The following Hogue Cowboy Action grips will fit Ruger Flat-Top Blackhawk, Pre 1963 Single Six, New Vaquero and SAS Vaquero models. These models are sometimes referred to as having XR3 grip frames. These Cowboy Action grips will fit models with or without the internal locking mechanisms. Our ivory polymer, Micarta or pearlized polymers dress up any firearm. Ivory polymer is available with or without added design features as described below. Each grip panel is laser engraved and hand finished to a brilliant shine with no hard sprayed-on finish to crack or peel off with use. Every polymer grip is made with the high quality and exacting fit that Hogue is famous for.

Hogue Blackhawk/Vaquero Ivory White

MSRP $59.95
Our Price: $50.96
Online Sale Price $50.96
Savings: $8.99
79070 Hogue Grip Blackhawk/Vaquero Pearl White

The following Hogue Cowboy Action grips will fit Ruger Flat-Top Blackhawk, Pre 1963 Single Six, New Vaquero and SAS Vaquero models. These models are sometimes referred to as having XR3 grip frames. These Cowboy Action grips will fit models with or without the internal locking mechanisms. Our ivory polymer, Micarta or pearlized polymers dress up any firearm. Ivory polymer is available with or without added design features as described below. Each grip panel is laser engraved and hand finished to a brilliant shine with no hard sprayed-on finish to crack or peel off with use. Every polymer grip is made with the high quality and exacting fit that Hogue is famous for.

Hogue Grip Blackhawk/Vaquero Pearl White

MSRP $69.95
Our Price: $59.46
Online Sale Price $59.46
Savings: $10.49
APX112-041 Apex Sig Sauer P320 Forward Set Trigger Bar KIT

The Apex Forward Set Trigger Bar for the "factory upgraded models" of the Sig Sauer P320 is a direct replacement to the factory trigger bar and is easily installed without the need for tools or fixtures. The patent pending Apex Forward Set Trigger Bar reduces trigger travel and reset and can be paired with the factory curved trigger or one of the three Apex triggers for the P320 (112-025, 112-026 or 112-027). Machined from billet steel.

– Direct drop-in replacement of factory trigger bar
– Reduces trigger travel approx. 20%
– Reduces reset
– Reduces trigger pull weight by approx. 10%
– In X-Series models, does not reduce pull weight but does reduce overall travel 20%
– Can be paired with the factory trigger, or an Apex trigger (112-025, 112-026 or 112-027)
– Maintains factory drop safety values

MSRP $79.95
Our Price: $75.97
Online Sale Price $75.97
Savings: $3.98
26137 Hogue Grip Piranha G10 Sig 226 Black Gray

- Intended for use on DA/SA models with decocker lever. Will also fit DAK models without decocker lever and hammer spur.
- Fits 9mm, 357SIG or .40 cal pistols
- Will fit the P226 MK25
- Will fit the P226 E2. Remove the E2 grips to expose the screw holes. You must purchase grips screws in addition to the new grips. This retrofits the 226 E2 back to standard 226 grip dimensions.

-Will NOT fit the Allround models.
- Will NOT fit the 226 Legion. Controls were made to hug tighter to the frame than standard 226 models. The slide release will not function on the Legion with Hogue grips installed.

- For optimum performance of an older SIG P226 with Hogue Grips it is recommended that the the trigger return spring be replaced with the "new" style spring which is available from SIG. SIG redesigned the 226 frame in the mid-1990s and the new pistols come with a redesigned trigger return spring. SIG encourages the use of this new spring on older guns. - Grip screws should be torqued to 13-15 inch lbs. Blue loctite is suggested on the threads.

Hogue Grip Piranha G10 Sig 226 Black Gray

MSRP $109.95
Our Price: $93.46
Online Sale Price $93.46
Savings: $16.49
26138 Hogue Grip Piranha G10 Sig 226 Green

- Intended for use on DA/SA models with decocker lever. Will also fit DAK models without decocker lever and hammer spur.
- Fits 9mm, 357SIG or .40 cal pistols
- Will fit the P226 MK25
- Will fit the P226 E2. Remove the E2 grips to expose the screw holes. You must purchase grips screws in addition to the new grips. This retrofits the 226 E2 back to standard 226 grip dimensions.

-Will NOT fit the Allround models.
- Will NOT fit the 226 Legion. Controls were made to hug tighter to the frame than standard 226 models. The slide release will not function on the Legion with Hogue grips installed.

- For optimum performance of an older SIG P226 with Hogue Grips it is recommended that the the trigger return spring be replaced with the "new" style spring which is available from SIG. SIG redesigned the 226 frame in the mid-1990s and the new pistols come with a redesigned trigger return spring. SIG encourages the use of this new spring on older guns. - Grip screws should be torqued to 13-15 inch lbs. Blue loctite is suggested on the threads.

Hogue Grip Piranha G10 Sig 226 Green

MSRP $109.95
Our Price: $93.46
Online Sale Price $93.46
Savings: $16.49
26139 Hogue Grip Piranha G10 Sig 226 Black

- Intended for use on DA/SA models with decocker lever. Will also fit DAK models without decocker lever and hammer spur.
- Fits 9mm, 357SIG or .40 cal pistols
- Will fit the P226 MK25
- Will fit the P226 E2. Remove the E2 grips to expose the screw holes. You must purchase grips screws in addition to the new grips. This retrofits the 226 E2 back to standard 226 grip dimensions.

-Will NOT fit the Allround models.
- Will NOT fit the 226 Legion. Controls were made to hug tighter to the frame than standard 226 models. The slide release will not function on the Legion with Hogue grips installed.

- For optimum performance of an older SIG P226 with Hogue Grips it is recommended that the the trigger return spring be replaced with the "new" style spring which is available from SIG. SIG redesigned the 226 frame in the mid-1990s and the new pistols come with a redesigned trigger return spring. SIG encourages the use of this new spring on older guns. - Grip screws should be torqued to 13-15 inch lbs. Blue loctite is suggested on the threads.

Hogue Grip Piranha G10 Sig 226 Black

MSRP $109.95
Our Price: $93.46
Online Sale Price $93.46
Savings: $16.49
28137 Hogue Grip Piranha G10 Sig 228/229 Black Gray

Please note:
• Will NOT fit P229 Carry models
• These grips will also fit DAK (Double Action Only) models.

ATTENTION P229 E2 Owners: Our Hogue P229 grips will fit the new P229 E2 frames. However, you will need to purchase the 4 required grip screws separately.

G10 grips are precision machined from the highest quality G10 material available to exacting specifications. G10 is a high-pressure thermoset plastic laminate consisting of multiple layers of woven fiberglass mesh cloth impregnated with an epoxy resin binder. It can be produced with many layers of the same color, or different colors to achieve a specific cosmetic look. Typical G10 is made of only flat layers. Hogue Inc. has a new patented method of producing G10 material called G-Mascus®. This method produces different patterns within the colored material which produces a unique look. Grips made in this style take on a similar look to Damascus steel, hence the name G-Mascus. Our G10 grips are designed for a lifetime of use.

Hogue Grip Piranha G10 Sig 228 BlackGRY

MSRP $109.95
Our Price: $93.46
Online Sale Price $93.46
Savings: $16.49
28138 Hogue Grip Piranha G10 Sig 228/229 GRN

Please note:
• Will NOT fit P229 Carry models
• These grips will also fit DAK (Double Action Only) models.

ATTENTION P229 E2 Owners: Our Hogue P229 grips will fit the new P229 E2 frames. However, you will need to purchase the 4 required grip screws separately.

G10 grips are precision machined from the highest quality G10 material available to exacting specifications. G10 is a high-pressure thermoset plastic laminate consisting of multiple layers of woven fiberglass mesh cloth impregnated with an epoxy resin binder. It can be produced with many layers of the same color, or different colors to achieve a specific cosmetic look. Typical G10 is made of only flat layers. Hogue Inc. has a new patented method of producing G10 material called G-Mascus®. This method produces different patterns within the colored material which produces a unique look. Grips made in this style take on a similar look to Damascus steel, hence the name G-Mascus. Our G10 grips are designed for a lifetime of use.

Hogue Grip Piranha G10 Sig 228 GRN

MSRP $109.95
Our Price: $93.46
Online Sale Price $93.46
Savings: $16.49